You have not selected any machine.

Search Site

Kusters

List  Grid 

  1. COMPLETE WEAVING PLANT YEAR 2005-2006

    Ref#  M-4145

    WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) RE Learn More
  2. M-4929 KUSTERS PAD-BATCH WASHING, BLEACHING, DESIZING

    Ref#  M-4929

    REFERENCE NUMBER: M-4929 (1111RVSZXX10) L KUSTERS PAD-BATCH WASHING, BLEACHING, DESIZING PADDER FOR PAD-BATCH WASHING, BLEACHING, DESIZING PROCESSES WORKING SPEED UP TO 100 MT/MIN CAN BE INSTALLED IN LINE AFTER SINGEING CEIA METAL DETECTOR DEVICE DUST SUCTION 500 LITERS IMPREGNATION/SATURATION COMPARTMENT PADDER ROLLER 4 VARIOUS SIZE INOX TANKS QUANTITY AVAILABLE: 1 Learn More
  3. M-4426 KUSTERS CALENDER YEAR 2008 WIDTH 3200m

    Ref#  M-4426

    REFERENCE NUMBER: M-4426 (10102MNJHX9RX) K KUSTERS CALENDER YEAR 2008 WIDTH 3200mm KUSTERS CALENDER YEAR 2008 WORKING WIDTH 3200mm PLC CONTROLLED CONTROL PANEL A HYDRAULIC MOTOR DRIVEN ROLLERS POLYAMIDE AUTOMATIC ROLL COOLING SYSTEM METAL DETECTOR AUTOMATIC SEWING CONTROL SYSTEM EDGE HOLDING SYSTEM STATIC ELECTRICITY RECEIVER CLOSED CIRCUIT OIL HEATING SYSTEM ROLLER BEARING SYSTEM ALL CAMERA CONTROLS CAN BE PERFORMED ON DIGITAL SCREEN ALL MALFUNCTIONS THAT MAY OCCUR, CAN BE SEEN ON THE DIGITAL DISPLAY CHROME CYLINDERS INDISE AND OUTSIDE SURFACE TEMPERATURE CAN BE MEASURED AT VARIOUS POINTS POLYAMIDE ROLLERS TEFLON BASE Learn More
  4. M-1900 KUSTERS CONTINUOUS WASHING LINE OPEN WIDTH -WORKING WIDTH: 1800mm

    Ref#  M-1900

    REFERENCE NUMBER: M-1900 (77060YGH6RXM) KUSTERS CONTINUOUS WASHING LINE OPEN WIDTH -WORKING WIDTH: 1800mm SECOND HAND OPEN WIDTH CONTINUOUS WASHING LINE MAKE KUSTERS ROLLER WIDTH: 2000mm WORKING WIDTH: 1800mm COMPOSED BY 5 WASHING BOXES KUSTERS/ROTOJET KUSTERS/ MEZZERA (1999) ENTRY WITH J-BOX 2 PADDERS OMAS 1 SQUEEZING BETA EXIT IN PLAITER OR BIG BATCH QUANTITY AVAILABLE: 1 Learn More
  5. M-5234 KUSTERS DYEING PADDER YEAR 1987 WORKING WIDTH 1800mm

    Ref#  M-5234

    REFERENCE NUMBER: M-5234 (1313LBEMXX12) L KUSTERS DYEING PADDER YEAR 1987 WORKING WIDTH 1800mm KUSTERS DYEING PADDER MODEL 222.11.1800 WORKING WIDTH 1800mm YEAR 1987 TO 2002 QUANTITY AVAILABLE: 1 Learn More
  6. M-3405 KUSTERS THERMOSOL DYEING MACHINE YEAR 1993 WIDTH 1800mm

    Ref#  M-3405

    REFERENCE NUMBER: M- 3405 (880160LMW7RM) K KUSTERS THERMOSOL DYEING MACHINE YEAR 1993 WIDTH 1800mm KUSTERS THERMOSOL DYEING MACHINE YEAR 1993 - TOTAL WIDTH 1800mm - FABRIC WIDTH 1600 mm - INITIAL DRYER 3 SECTIONS – ELECTRIC HEATING - DRYER 3 SECTIONS – STEAM HEATED ( 5 BARS) - THERMOSOL 2 SECTIONS – GAS HEATED QUANTITY AVAILABLE: 1 Learn More
  7. K-1620 KUSTERS WASHING RANGE 3100mm YEAR 1995

    Ref#  K-1620

    REFERENCE NUMBER: K-1620 KUSTERS WASHING RANGE 3100mm YEAR 1995 WORKING WIDTH: 3100mm YEAR 1995 METAL DETECTOR AT THE INLET MACHINE INLET FROM ERHART + LEIMER PRE-WETTING AND DWELLING BELT (ZOLLIG) KUSTERS WASHING SECTION (2 CHAMBERS), WORKING WIDTH 3100mm KUSTERS INTERMEDIATE SQUEEZER WORKING WIDTH 3200mm KUSTERS FINAL SQUEEZER WORKING WIDTH 3200mm QUANTITY AVAILABLE: 1 Learn More
  8. H-1159 KUSTERS CONTINUOUS OPEN WIDTH MERCERIZING RANGE 1800mm

    Ref#  H-1159

    H-1159 KUSTERS CONTINUOUS OPEN WIDTH MERCERIZING RANGE 1800mm

    WIDTH OF FABRIC: 960mm TO 1800mm
    ROLLER SURFACE WIDTH: 2000mm
    DRIVE SIDE: LEFT SIDE
    OPERATING SIDE: FAR SIDE
    PRODUCTION SPEED: 60 METERS PER MINUTE
    TECHNICAL SPEED: 80 METERS PER MINUTE
    WATER PRESSURE: 2.0 ± 0.5 BAR CONSTANT, TO BE PROVIDED LOCALLY
    VAPOR PRESSURE: 3.0 ± 0.5 BAR WET STEAM, TO BE PROVIDED LOCALLY
    AIR PRESSURE (FREE OF OIL AND WATER): 7 BAR, TO BE PROVIDED LOCALLY
    TYPES OF FABRICS: WOVEN
    QUALITY OF FABRIC: COTTON, BLENDS, VOILE (DRY)
    FABRIC WEITER: 65 TO 300 GRAMS PER SQUARE METER

    Learn More
  9. S-1220 KUSTERS CALANDER AND EMBOSSING CALENDER, WORKING WIDTH 3400mm, YEAR 2002

    Ref#  S-1220

    S-1220 KUSTERS CALANDER AND EMBOSSING CALENDER, WORKING WIDTH 3400mm, YEAR 2002

    KUSTERS CALANDER AND EMBOSSING CALENDER
    MAKE: KUSTERS
    YEAR: 2002
    TYPE: 213.40/3400
    WORKING WIDTH: 3400mm
    3 CYLINDERS
    COTTON – STEEL – RACOLAN
    HYDRAULIC PRESSURE MAXIMUM 40 TONES
    COMPLET ENTRY WITH METAL DETECTOR AND SEWING DETECTOR
    5 DIFFERENT STEEL EMBOSSING CYLINDERS
    PREPARED FOR OIL HEATING WITH PUMP AND VALVES
    EXIT WITH SALVADE AXIAL A-FRAME ROLLING DEVICE
    INCLUDING TWO MANUAL HAND CRANES
    WITH FRAME TO CHANGE THE CYLINDERS

    MACHINES ARE STILL RUNNING

    QUA Learn More

List  Grid