You have not selected any machine.

Search Site

Santex

List  Grid 

Page:
  1. 1
  2. 2
  1. M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL

    Ref#  M-4136

    REFERENCE NUMBER: M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL TYPE: SANTEX TENTER FRAME YEAR: 2003 WORKING WIDTH: 800mm UP TO 3400mm SPEED: 2 UP TO 20 M/MIN CHAIN: VERTICAL PIN CHAIN DRYER: 3 COMPARTMENTS DRYER LENGTH: 6 METERS MAX. TEMP.: 230° C HEATING: DIATHERMIC OIL OIL BOILER: GARIONI NAVAL TH 500 CAPACITY: 581 KW, MAX. TEMP. 350° C, NITROGEN COVERED TOTAL LENGTH NEEDED: APPROX. 20,000mm TOTAL WIDTH OF MACHINE: 6,200mm TOTAL HEIGHT OF MACHINE: 3,100mm ENTRY COMBINATION GUIDING CHAIN FOR A-FRAMES CORRECT POSITIONING RUBBERIZED ROLLERS AS INFEED UNIT WECO IMPREGNAT Learn More
  2. M-5345 SANTEX SANTASHRINK 2-CHAMBER SINGLE PASS RELAX DRYER YEAR 2005 WIDTH 2400mm

    Ref#  M-5345

    REFERENCE NUMBER: M-5345 (220WENQXX1) L SANTEX SANTASHRINK 2-CHAMBER SINGLE PASS RELAX DRYER YEAR 2005 WIDTH 2400mm SANTEX SANTASHRINK SWISS TWO CHAMBER, SINGLE PASS RELAX DRYER YEAR 2005 QUANTITY AVAILABLE: 1 Learn More
  3. G-9080 SANTEX SANTASOFT 200 SOFTING MACHINE 2000mm YEAR 2000

    Ref#  G-9080

    REFERENCE NUMBER: G-9080 SANTEX SANTASOFT 200 SOFTING MACHINE 2000mm YEAR 2000 MAKER: SANTEX MODEL: SANTASOFT 200 YEAR 2000 ROLLER WIDTH: 2000mm QUANTITY AVAILABLE: 1 Learn More
  4. M-4255 SANTEX OVEN YEAR 1992 WIDTH 2500mm - GAS

    Ref#  M-4255

    REFERENCE NUMBER: M-4255 (101095MAN9R) K SANTEX OVEN YEAR 1992 WIDTH 2500mm - GAS SECOND HAND SANTEX OVEN WIDTH 2500mm YEAR 1992 QUANTITY AVAILABLE: 1 Learn More
  5. A-1266 SANTEX OVEN, WIDTH 2400 MM, YEAR 1992V

    Ref#  A-1266

    REFERENCE NUMBER: A-1266 (010195GHB12RE) A SANTEX OVEN, WIDTH 2400 MM, YEAR 1992 SANTEX OVEN WORKING WIDTH: 2400 MM YEAR: 1992 QUANTITY AVAILABLE: 1 Learn More
  6. M-1795 SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm

    Ref#  M-1795

    REFERENCE NUMBER: M-1795 (77057BHB6R) SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm CONSISTING OF: ENTRY UNIT DRY CHAMBERS VIBRATION AND DAMPER UNIT EXIT UNIT ALL MOTORS ELECTRIC PANELS EXHAUSTER MOISTURE MEASURE UNIT ENERGY SAFE UNIT CONTROL COMMANDER SANTAMATIC 2000 QUANTITY AVAILABLE: 1 Learn More
  7. K-8462 SANTEX SANTASHRINK 180 YEAR 1997 WIDTH 1800mm

    Ref#  K-8462

    REFERENCE NUMBER: K-8462 SANTEX SANTASHRINK 180 YEAR 1997 WIDTH 1800mm SIEVE DRUM DRYER WORKING WIDTH: 1800mM YEAR: 1997 THE DRYING LINE IS CONSISTING OF: -INFEED -DRYING CHAMBERS -VIBRATION AND STEAMING UNIT -EXIT -DRIVE SYSTEM -EXHAUST AIR SYSTEM -MEASURING UNIT TO MEASURE MOISTURE -CONTRO PANEL THE MACHINE IS PREVIOUSLY USED FOR DRYING POLYAMID TUBULAR MATERIAL WITH CONTROL UNIT SANTAMATIC 2000 3x400V+N+E 230V 50HZ CONNECTED LOAD 64 KW QUANTITY AVAILABLE: 1 Learn More
  8. M-4608 VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm

    Ref#  M-4608

    REFERENCE NUMBER: M-4608 (11116SWJK10R) L VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm LAMINATING LINE MANUFACTURER: VILLARS (CH) ACTUALLY SANTEX YEAR OF CONSTRUCTION: 1993 WORKING WIDTH: 2200mm (NOMINAL WIDTH 2100mm) OPERATING VOLTAGE: 3X380(400)V TOTAL POWER: 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION: INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997): 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT Learn More
  9. M-1434 SANTEX DRYER TYPE SANTASHRINK JUMBO YEAR 1996 WIDTH 2600mm

    Ref#  M-1434

    REFERENCE NUMBER: M-1434 (66014ZERW5RC) SANTEX DRYER TYPE SANTASHRINK JUMBO YEAR 1996 WIDTH 2600mm SANTEX DRYER TYPE SANTASHRINK JUMBO YEAR 1996 -USEFULL WIDTH 2600 mm (NOMINAL WIDTH 2400 mm) -1 UNIT PIN CHAIN STENTERING 5.5 ENTRANCE LOND WITH FOULARD WITH MAHLO -5 FIELDS OF 2 MT EACH ONE. -GAS HEATED (CHANCE OIL SYSTEM) -ONE FAN EACH FIELD DRIVEN WITH AC MOTOR AND INVERTER -DOUBLE PASSAGE WITH PTF BANDET -EXHAUST FAN -MAX TEMPERATURE 200 ° -SPEED OF THE CARPET 0/30 MT/MIN (DRIVEN WITH A.C MOTORS AND INVERTER) -INLET FROM FOLD (NO PADDER AT INLET) -OUTLET WITH CARPET AND FOLDING DEVICE -DEVICE TO CONTROL UMIDITY INSIDE O Learn More
  10. M-4743 SANTEX TENSIONLESS DRYER YEAR 2003 – 5 ZONES – 3200MM

    Ref#  M-4743

    REFERENCE NUMBER: M-4743 (111185AKW10U) L SANTEX TENSIONLESS DRYER YEAR 2003 – 5 ZONES – 3200MM SANTEX 5 ZONES TENSIONLESS DRYER WITH 5 MAXON BURNERS, GAS HEATED WIDTH 126” (3.2M) WIDE, HAS 5 GUIDES FOR TUBULAR FABRIC 3-PASS, YEAR 2003 ONLY USED FOR TESTING AT THE BEGINNING AND THEN THEY KEPT IT AS A BACKUP, WHICH NEVER HAPPENED QUANTITY AVAILABLE: 1 Learn More

List  Grid 

Page:
  1. 1
  2. 2