Needle Looms

Items 1-10 of 14

Page
per page
Set Descending Direction
  1. M-2057 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mm
    M-2057 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mm
    REFERENCE NUMBER: M-2057 (77011229TGUX) NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mm Learn More
  2. F-1225 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mm
    F-1225 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mm
    REFERENCE NUMBER: F-1225 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mm Learn More
  3. M-4398 STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm
    M-4398 STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm
    REFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More
  4. M-5266 MULLER NF 53 NEEDLE LOOM
    M-5266 MULLER NF 53 NEEDLE LOOM
    REFERENCE NUMBER: M-5266 (1313236LH12RX) L MULLER NF 53 NEEDLE LOOM MULLER NF 53 FULLY RECONDITIONED NEEDLE LOOMS SHED MOTION: NORMAL # OF HARNESSES: 12 FRAMES INCORPORATED TAKE DOWN: DOUBLE KNURLED STEEL BINDER THREAD: SYSTEM III WEFT FEED: MUTRAN II PRODUCTION MONITOR: 3 SHIFT PICK CLOCK PICK REPEAT: 8 – 48 PICK CHAIN LINK DRIVE: BRAKE MOTOR / SLOW MOTION POWER: 230/240 VOLT 3 PHASE 60HZ ACCESSORIES: 4 RAIL STOP MOTION, CONE HOLDERS, HEDDLES & DROP WIRES QUANTITY AVAILABLE: 1 Learn More
  5. M-5292 ASSELIN A25 NEEDLE LOOM 1993 2500mm
    M-5292 ASSELIN A25 NEEDLE LOOM 1993 2500mm
    REFERENCE NUMBER: M-5292 (1313PRCDXX12) L ASSELIN A25 NEEDLE LOOM YEAR 1993 WIDTH 2500mm ASSELIN NEEDLE LOOM TYPE A25 TYPE SD26 1M YEAR 1993 WORKING WIDTH 2500mm QUANTITY AVAILABLE: 1 Learn More
  6. M-5294 DILO OD-SV 25 STRUCTURING NEEDLE LOOM YEAR 1998 WIDTH 2600mm
    M-5294 DILO OD-SV 25 STRUCTURING NEEDLE LOOM YEAR 1998 WIDTH 2600mm
    REFERENCE NUMBER: M-5294 (1313VGBCXX12) L DILO OD-SV 25 STRUCTURING NEEDLE LOOM YEAR 1998 WIDTH 2600mm DILO STRUCTURING NEEDLE LOOM TYPE OD-SV 25 YEAR 1988 QUANTITY AVAILABLE: 1 Learn More
  7. M-5251 DILO SNO 25 LOOP NEEDLE LOOM YEAR 1971 WIDTH 2500mm
    M-5251 DILO SNO 25 LOOP NEEDLE LOOM YEAR 1971 WIDTH 2500mm
    REFERENCE NUMBER: M-5251 (1313725BK12RX) L DILO SNO 25 LOOP NEEDLE LOOM YEAR 1971 WIDTH 2500mm DILO LOOP NEEDLE LOOM MAKE: DILO TYPE: SNO 25 YEAR: 1971 WORKING WIDTH: 2500mm NEEDLES: CA. 3,000 NEEDLES NEEDLING: SINGLE BOARD DOWN LAMELLA GAUGE: 3.5mm QUANTITY AVAILABLE: 1 Learn More
  8. M-1737 HIGH-SPEED DOWN-STROKE NEEDLE LOOM 4500mm
    M-1737 HIGH-SPEED DOWN-STROKE NEEDLE LOOM 4500mm
    MODEL: BG-450 NEEDLING SPEED: 0 TO 1000 RPM DOWN STROKE 60mm NEEDLE DENSITY: 5000 NEEDLES PER LINEAR METER PINHOLE DIAMETER: Ø1.83mm ACTUAL WIDTH OF NEEDLE PLATE: 4500mm STRIP PLATE AND SCREEN PLATE: ALL PINHOLES ARE BEVELLED, SURFACE CHROME-COATED, COMPUTERIZED DRILLING FEED SPEED: 0.6 TO 6M/MIN (NORMALLY BETWEEN 2.5 AND 4M/MIN) MAIN MOTOR: 22KW INVERTER CONTROL FEEDING AND DISCHARGING MOTOR: 2.2KW EACH, INVERTER CONTROL MOTORS FOR STRIP PLATE AND SCREENING PLATE: 1.5KW×2, POWER-DRIVEN WORM-GEAR LIFT, WITH RULER AND TRAVEL SWITCHES PVC APRON FEEDING, CHROM-COATED DOUBLE-ROLLER DISCHARGING UP AND DOWN CONTROL: PNEUMATIC CONTROL TOTAL POWER: 27.2KW QUANTITY AVAILABLE: 1 Learn More
  9. M-3785 FEHRER NL 9/S NEEDLE LOOMS YEAR 1989 WIDTH 4400mm
    M-3785 FEHRER NL 9/S NEEDLE LOOMS YEAR 1989 WIDTH 4400mm
    REFERENCE NUMBER: M-3785 (99061JNR8RM) L FEHRER NL 9/S NEEDLE LOOMS YEAR 1989 WIDTH 4400mm MAKE: FEHRER TYPE: NL9/S YEAR: 1982 QUANTITY AVAILABLE: 1 Learn More
  10. M-1804 DILO OD IV 25-FOUR BOARD DOWN STROKE NEEDLE LOOM-2500mm-YEAR 1983
    M-1804 DILO OD IV 25-FOUR BOARD DOWN STROKE NEEDLE LOOM-2500mm-YEAR 1983
    REFERENCE NUMBER: M-1804 (770685GH7RX) DILO OD IV 25-FOUR BOARD DOWN STROKE NEEDLE LOOM-2500mm-YEAR 1983 MAKE: DILO MODEL: DILO OD IV 25 WORKING WIDTH 2500mm YEAR 1983 QUANTITY AVAILABLE: 1 Learn More

Items 1-10 of 14

Page
per page
Set Descending Direction