Search results for: 'Stor'

TT-2346 STORK COMPLETE LINE FOR PREPARING ROTARY SCREENS FOR PRINTING, MAXIMUM LENGTH OF SCREEN 1980mm, YEAR 1991 STATUS: EQUIPMENT COMPLETE IN WORKING CONDITION AVAILABLE: IMMEDIATELY Learn More

YY-1829 FOAM BUN, BLOCK RACK STORAGE SYSTEM THE FOAM BLOCK RACK STORAGE SYSTEM IS FOR THE STORAGE OF THE UNCURED FOAM BLOCK AFTER FOAMING AND CUTTING OFF, AND THE SUPER SOFT FOAM WHICH CAN NOT BE LIFTED BY CRANE. EQUIPPED WITH THE AUTOMATIC MOVABLE CONVEYOR LINE, WHICH CAN MOVE WITH LEFT & RIGHT, UP & DOWN DIRECTION TO CONNECT TO EACH CONVEYOR RACK OF THE SYSTEM. WITH THE TOUCH SCREEN AND PLC AUTO CONTROL, THE FOAM BLOCKS IN THE STORAGE SYSTEM WILL BE MOVED IN AND OUT OF THE STORAGE SYSTEM AUTOMATICALLY. THIS STORAGE SYSTEM WILL HELP THE FOAM CURING PROCESS, AND UTILIZE MORE STORAGE SPACE EFFECTIVELY UNDER LIMITED WORKSHOP, AND SAVE A LOT OF TIME AND LABOR COST. Learn More

TT-6864 STORK DIGITAL PRINTER WITH DRYER, WIDTH 2000mm, YEAR 2019 1. STORK DIGITAL PRINTER WITH DRYER 2. YEAR: 2019 3. PRINT HEADS: 36 QUANTITY: 1 Learn More

P-6603 SILOS ROASTED COFFEE STORAGE (STONER FED)

THIS UNIT NEEDS TO BE REMOVED TO MAKE ROOM FOR BIG WALK-IN COOLER - AND IT CAN BE CHANGED RADICALLY TO FIT MOST ANY SITUATION. THE ACTUAL DE-STONER IS SITTING NEXT TO THE COOLER ON A 90 KILO PROBAT (ALTHOUGH THIS STONER/STORAGE SILO IS NOT LIMITED TO ANY SIZE AS THE STONER DOES NOT KNOW HOW BIG THE COOLER - IT ONLY KNOWS TO KEEP GOING TILL IT IS EMPTY.

STONER LIFTS COFFEE UP TO A SURGE HOPPER ABOVE - THEN GRAVITY FEEDS DOWN TO THE BIN THAT YOU TOLD IT TO GO . . . HOWEVER, THERE ARE SEVERAL OPTIONS ON HOW SUCH A SILO GETS LOADED - EVERYTHING FROM A SUCTION WAND TO OTHER CONFIGURATIONS OF THE GRAVITY ONE PICTURED . . . AS THIS IS A DISCUSSION TOPIC. THE TOP SECTION STANDS ALONE AND CAN EASILY BE REMOVED. THE ACTUAL STORAGE SILOS STAND ALONE AND THEY CAN BE EASILY REMOVED - OR EVEN BE MADE TALLER SHORTER TO FIT YOUR BUILDING. THEN THE BASE CAN BE ALTERED ACCORDINGLY. NOTICE THE CONTROL BOX ON THE LEFT SIDE - THAT IS 21 INCHES WIDE X 24 INCHES TALL AND 10 INCHES DEEP AND THAT CAN BE MOUNTED ON ANY WALL OR RIGHT WHERE IT IS . . . TOTALLY MOVABLE.

92.5 INCHES WIDE - THAT IS JUST SHORT OF 8 FEET OVERALL LENGTH.
8 FEET TALL FOR THE MAIN STORAGE PLUS THE STUFF ON TOP THAT MAY END UP BEING CHANGED.
36 INCHES WIDE ON THE STAND - BUT ACTUAL STORAGE IS 32 INCHES
19.5 CUBIC FEET OR 400 POUNDS ROASTED COFFEE
CAN BE USED FOR GREEN COFFEE - 850 POUNDS+
YOU CAN INSTALL ANY SPACE SAVING LOADING BLOWER, VACUUM OR EVEN AUGAR . . . GREEN OR ROASTED WHOLE BEAN
BASICALLY THERE ARE SO MANY CONFIGURATIONS OR WAYS TO USE THIS UNIT - IT IS JUST GREAT TO FIND SOMETHING SO WELL PRESERVED, AS THIS HAS BEEN SITTING UNUSED FOR AT LEAST 15 YEARS EVEN THOUGH THE ACTUAL COFFEE OPERATION IS VERY ACTIVE - JUST DID NOT USE THIS PARTICULAR CONFIGURATION.

QUANTITY: 1

Learn More

TT-2662 STORK COATING LINE ROLLER, WIDTH 2000mm, YEAR 1989 QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5163 (121213CMYB11RX) L STORK RD-IV ROTARY PRINTING WIDTH 2850mm WITH 12 COLORS STORK ROTARY PRINTING TYPE RD IV WORKING WIDTH 2850mm 12 COLORS RAPPORT 640 WIDTH RUBBER BELT 3040mm UNROLLING DEVICE FOR A-FRAME BRUSHING UNIT WITH ASPIRATION GUIDERS FOR FABRIC AND KNITTING TERMOPLAST STORK DRYER OF 2 SECTIONS, HEATED BY GAS TOTAL LENGTH 8 METERS EXIT BY PLAITER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4860 (1111198ZVF10RX) L STORK/BRUCKNER COATING AND FLOCKING LINE YEAR 1982-1998 WIDTH 1600-2000mm COATING AND FLOCKING LINE CONSISTING OF: ENTRANCE ACCUMULATOR STORK SINGLE COLOR PRINTING MACHINE SINGLE HEAD KNIFE COATING UNIT FLOCKING UNIT MULTI LAYER STENTER, THERMO OIL HEATED, YEAR 1982 COOLING, EMBOSSING UNIT, WINDER MAKE: BRUCKNER / STORK WORKING WIDTH: 1600mm FOR FLOCKING WORKING WIDTH: 2000mm FOR COATING YEAR: 1994 / 1998 ENLARGED & REVISED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4756 (1111DJMZXX10) L STORK & ZIMMER CYINDER COATING HEADS YEAR 1984-1997 WIDTH 2600mm (1) X STORK CYLINDER COATING HEAD TYPE CT4 – YEAR 1997 1 CYLINDER, WORKING WIDTH 2600mm (1) X ZIMMER CYLINDER COATING HEAD, TYPE RHRRSGMA – YEAR 1984 1 CYLINDER, WORKING WIDTH 2600mm (1) X STORK FOAM GENERATOR TYPE FP2C – YEAR 1996 CAPACITY 600L (1) X CYLINDER WASHING MACHINE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3485 (88090MJH7RM) K STORK ROTARY PRINTING MACHINE TYPE RD-4 YEAR 1989 WIDTH 1800mm STORK ROTARY PRINTING MACHINE YEAR 1989 TYPE: RD-4 WIDTH: 1800mm # OF COLORS: 12 REPEAT: 640 WITH STORK CONVEYOR DRYER 3 SECTIONS EXIT WITH PLAITER 380V 50HZ EXCELLENT CONDITION QUANTITY: 1 Learn More

REFERENCE NUMBER: M-3724

STORK SAPPHIRE DIGITAL PRINTER YEAR 2004 WIDTH 1600mm

 

STORK DIGITAL TYPE SAPPHIRE

DATE 2004

MACHINERY: BULY SYSTEM

2L CARTRIDGE

DYE SUPPLIER: SPRINTS/STORK PRINTS

WEIGHT: 160

WORKING WIDTH: 1600mm

 

QUANTITY: 2

Learn More