Search results for: 'mach 3'

TT-2308 FONGS DYEING MACHINE, WIDTH 1500mm, YEAR 2016 600KG 1 SETS 1200KG 2 SETS 1800KG 2 SETS Learn More

REFERENCE NUMBER: T-6973 LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE, WORKING WIDTH 1800mm LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE CONDITION IS LIKE NEW WITH LOW WORKING HOURS/NEEDLES JUST NEWLY CHANGES 24 + 24 RAISING CYLINDERS WORKING WIDTH: 1800mm AC MOTORIZATION: 380V 50Hz + INVERTERS FOLDER AT EXIT BOTH MACHINES ARE STILL MANUFACTURING ON THE MILL FLOOR Learn More

REFERENCE NUMBER: T-6972 FONG’S DYEING MACHINE, 6 ROPES, YEAR 2010 FONG’S DYEING MACHINE YEAR 2010 6 ROPES 300KG FOR EACH ROPE RUNNING CONDITION QUANTITY: 4 SETS Learn More

R-7198 SALVADE RELAX DRYER MACHINE, WORKING WIDTH 2400mm, YEAR 1995 – FOR KNITS

BRAND: SALVADE S.P.A. ITALY
MODEL: AVA
YEAR: 1995
WORKING WIDTH: 2400mm
TYPE: TWO PASSAGES OF KNITS, KNITS INPUT AND OUTPUT ON ONE SIDE (OPEN DRYER MACHINE)
GAS HEATING, TWO GAS BURNERS ITAS, MODEL: 84 A TBH
GAS BURNERS CAPACITY MAX.: 522 KW, 440,000 KCAL/H
SWITCHBOARD AND ELECTRICAL MOTORS: 380V, 50 HZ

QUANTITY: 1

Learn More

R-1412 THIES “LUFT-ROTO PLUS SII" FABRIC JET DYEING MACHINE 140/2 TUBES – PL, YEAR 2008

THIES “LUFT-ROTO PLUS SII" FABRIC JET DYEING MACHINE
TYPE: 140/2 TUBES – PL
YEAR: 2008
NOMINAL CAPACITY: APPROX. 250 KG/DRUM PER MACHINE
CAPACITY PER MACHINE: APPROX. 500 KG
TOTAL NOMINAL CAPACITY: APPROX. 1000 KG
LIQUOR RATIO: MIN. 1:3
OPERATING TEMPERATURE: 140 °C

QUANTITY: 2

Learn More

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4166

ARIOLI STEAMER MACHINE YEAR 2003 WIDTH 2400mm -OIL

 

ARIOLI STEAMER MACHINE

YEAR 2003

WIDTH 2400mm

3 CABINS

350MT

WITH OIL  

Learn More

REFERENCE NUMBER: C-3851

MONFORTS STENTER FOR KNITS

MODEL: MONTEX 6500 7F TWINAIR

7 CHAMBERS GAS HEATED

WORKING WIDTH: 2200mm

YEAR: 2012

 QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4495 (1111TSDGXX10) D LAIP AIRFLOW DYEING MACHINES 2011 – 100 KG EACH MACHINE MAKE: LAIP YEAR: 2011 MODEL: FLOW-98 GRADI TYPE: SBRUFF 1 CORDA SINGLE ROPE INVERTER DRIVE CONTROL TYPE: SEDOMAT-1800 380V, 50HZ 100 KG EACH MACHINE QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-0551 (88048QDJ7RC) MONFORTS SANFORIZING MACHINE YEAR 1992 WIDTH 2000mm MONFORTS SANFORIZING MACHINE YEAR: 1992 TYPE: MONFORTEX MODEL: E.U.A KOMBI WIDTH: 2000mm QUANTITY AVAILABLE: 1 Learn More