Search results for: 'metal'

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6919 RAMISCH KLEINEWEFERS CALENDER, WORKING WIDTH 1800mm, YEAR 1991 RAMISCH KLEINEWEFERS CALENDER YEAR 1991 WORKING WIDTH 1800mm 3 CYLINDERS 2 STEEL 1 RACOLAN UPPER AND LOWER CYLINDERS ARE ELECTRIC HEATED WITH METAL AND SEWING DETECTOR TEMP. 190 °C WORKING PRESS 50 BAR MACHINES ARE IN EXCELLENT RUNNING CONDITION QUANTITY: 1 Learn More

S-1220 KUSTERS CALANDER AND EMBOSSING CALENDER, WORKING WIDTH 3400mm, YEAR 2002

KUSTERS CALANDER AND EMBOSSING CALENDER
MAKE: KUSTERS
YEAR: 2002
TYPE: 213.40/3400
WORKING WIDTH: 3400mm
3 CYLINDERS
COTTON – STEEL – RACOLAN
HYDRAULIC PRESSURE MAXIMUM 40 TONES
COMPLET ENTRY WITH METAL DETECTOR AND SEWING DETECTOR
5 DIFFERENT STEEL EMBOSSING CYLINDERS
PREPARED FOR OIL HEATING WITH PUMP AND VALVES
EXIT WITH SALVADE AXIAL A-FRAME ROLLING DEVICE
INCLUDING TWO MANUAL HAND CRANES
WITH FRAME TO CHANGE THE CYLINDERS

MACHINES ARE STILL RUNNING

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-0681

GUARNERI CALENDER FOR WOVEN FABRICS YEAR 1996 -3200mm - 4 BOWLS

 

GUARNERI CALENDER FOR WOVEN FABRICS

TYPE: E.470

YEAR 1996

FABRIC WIDTH: 3200mm

ROLLER WIDTH: 3400mm

4 BOWLS, CHROMED HEATED+RECALON+RECALON+CHROMED HEATED

HYDRAULIC PRESSURE UPTO 100 TONS

METAL DETECTOR, SEAM DETECTOR

EXIT WITH MOTORIZED BATCHER

380 V, 3 PHASES, 50 HZ, 50 KW

MAX TEMPERATURE: 200°C ON THE ROLLS

STEAM HEATED

MACHINE STOPPED/INSTALLED

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3807 RAMISCH KLEINWEFER CALENDER FOR WOVEN FABRICS RKK-3100, WORKING WIDTH 2800mm, YEAR 1996 DETAILS: RAMISCH KLEINWEFER CALENDER FOR WOVEN FABRICS WORKING WIDTH: 2800mm YEAR: 1996 TYPE: RKK-3100 ROLLER WIDTH: 3000mm THREE BOWLS (1 X RECALON, 1 X STEEL, 1 X COTTON) ELECTRIC HEATED HYDRAULIC PRESSURE METAL AND SEAM DETECTORS EXIT WITH PLAITER OR BIG BATCHER 380V 50HZ QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-1620 KUSTERS WASHING RANGE 3100mm YEAR 1995 WORKING WIDTH: 3100mm YEAR 1995 METAL DETECTOR AT THE INLET MACHINE INLET FROM ERHART + LEIMER PRE-WETTING AND DWELLING BELT (ZOLLIG) KUSTERS WASHING SECTION (2 CHAMBERS), WORKING WIDTH 3100mm KUSTERS INTERMEDIATE SQUEEZER WORKING WIDTH 3200mm KUSTERS FINAL SQUEEZER WORKING WIDTH 3200mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3674 (880WUREXX7) L SANTEX TENTER YEAR 1997-PIN CHAIN -6 ZONES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3372 (8808AIFD7RC) K SANTA LUCIA STENTER YEAR 1990 WIDTH 3200mm -OIL HEATED - 5 ZONES - VERTICAL PIN CHAIN SANTA LUCÍA STENTER 3200mm OIL HEATED 5 CHAMBERS VERTICAL PIN CHAIN QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5323 (220TLTDXX1) L TUBETEX OPEN WIDTH COMPACTOR YEAR 2005 WITH PIN ENTRY TUBETEX OPENWIDTH COMPACTOR YEAR 2005 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1834

BETA CALENDER FOR WOVEN FABRICS YEAR 1987 -3200mm - 2 BOWLS

 

BETA CALENDER FOR WOVEN FABRICS

YEAR: 1987

MODEL: 864

ROLLER WIDTH: 3200mm

FABRIC WIDTH: 3000mm

2 BOWLS, RECALON + CHROMED HEATED

HYDRAULIC PRESSURE UP TO 90 TONS

SEAM DETECTOR

METAL DETECTOR

EXIT WITH BATCHER

EXCELLENT CONDITION

Learn More