Search results for: 'Floor'

REFERENCE NUMBER: T-6851 HERGETH, HUNTER SPRAY BOND LINE, YEAR 1980 TO 1990 BRAND: HERGETH, HUNTER SHORT DESCRIPTION: SPRAY BOND LINE YEAR: 1980 TO 1990 SPRAY BOND LINE, 160” CONSISTING OF: 1 FIBER CONTROL BLEND LINE (3 HOPPERS - 2-60” AND 1-36” W/FLOOR CONV.) 1 HUNTER BLEND LINE (3 HOPPERS- 72” 48”, 36” W/ FLOOR CONV.) 1 HERGETH BLEND LINE (4 HOPPERS- 36” W/FLOOR CONV.) 3 HERGETH FINE OPENERS 1200mm WIDE 3 SPINBAU 2000mm CARDS WITH CHUTE FEEDS 3 CROSSLAPPERS 160” WIDE (P&S/ WISE) 1 P&S SPRAY STATION - 160” 1 P&S 160” FLUTE OVEN 2 TEMP ZONES 2000mm BTU EACH P&S SLITTERS 9 KNIFES W/HOT WIRE CUTOFF AND 2 ROLL WINDER ALL FLOOR CONVEYORS AND SUPPORT EQUIPMENT CLARK 48 INCH 4 BARS CLAW PICKER FOR RECYCLE ALL EQUIPMENT RUNS ON 220/440 3 PHASE LATE 1980S-EARLY 90S THIS LINE IS CURRENTLY RUNNING QUANTITY: 3 Learn More

LIST NUMBER: L-3004
SIZING MACHINES FOR SALE

REFERENCE NUMBER: C-5212
BENNINGER SIZING MACHINE
TYPE BEN SIZETEC
YOM: 2004
WORKING WIDTH: 2400mm
BENINGER DIRECT WARPER
TYPE BEN DIRECT
YOM: 2005
WORKING WIDTH: 2400mm
QUANTITY: 1

REFERENCE NUMBER: P-4682
BENNINGER
SIZING MACHINE
YEAR: 2002
WIDTH: 2800mm
QUANTITY: 1 SET

REFERENCE NUMBER: P-7130
SUCKER MULLER
TYPE: HACOBA
SIZING MACHINE
YEAR: 1999
WORKING WIDTH: 1800mm
QUANTITY: 1

REFERENCE NUMBER: C-3650
OFFER 001
SUCKER MOENUS Z 14 SIZING MACHINE
WIDTH: 3400mm
YEAR: 2006
QUANTITY: 1
OFFER 002
BENNINGER BEN DIRECT WARPING MACHINE
YEAR: 2005
WIDTH: 2200mm
QUANTITY: 1

REFERENCE NUMBER: A-1197 (1212GHBXX11) A
MAKE: BENNINGER
MODEL: BEN SIZETEC
YEAR: 1998
Width - 2000mm
QUANTITY: 2

REFERENCE NUMBER: P-6712
SUCKER MULLER
SIZING MACHINE
YEAR: 2003
HEADSTOCK WIDTH: 3600mm
QUANTITY: 1

REFERENCE NUMBER: M-5040
(1 SET) BENNINGER SIZING MACHINES (SLASHERS), YEAR 2000

REFERENCE NUMBER: R-3746
ITEM 001
KARL MAYER​ DIRECT WARPING ​MACHINE
YEAR: 20​06​
WIDTH: 2​0​00mm
​QUANTITY: 1 SET
ITEM 002
KARL MAYER SIZING MACHINE
YEAR: 2011
QUANTITY: 1 SET

Learn More

REFERENCE NUMBER: T-6973 LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE, WORKING WIDTH 1800mm LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE CONDITION IS LIKE NEW WITH LOW WORKING HOURS/NEEDLES JUST NEWLY CHANGES 24 + 24 RAISING CYLINDERS WORKING WIDTH: 1800mm AC MOTORIZATION: 380V 50Hz + INVERTERS FOLDER AT EXIT BOTH MACHINES ARE STILL MANUFACTURING ON THE MILL FLOOR Learn More

REFERENCE NUMBER: T-6906 SUCKER MULLER SIZING MACHINE, YEAR 2003 SUCKER MULLER SIZING MACHINE YEAR 2003 ONE SET WIDTH 3400mm TWO SETS WIDTH 3600mm 12 PCS CYLINDER DIAMETER 800 24 PCS BEAM DIAMETER 800 STOPPED ON THE MILL FLOOR CAN TEST RUN QUANTITY: 1 Learn More

WALL MOUNTED
SCREEN SIZE: 8" IPS
OPERATING SYSTEM: ANDROID
CPU: QUAD CORE
ROCKCHIP: RK3288
RAM: 2G
ROM: 8G
CAMERA PIXEL: 200W
WORKING METHOD: INFARED FACIAL RECOGNITION AND TEMPERATURE SYSTEM
INSTALLATION: WALL MOUNTING

TABLE MOUNTED
SCREEN SIZE: 8" IPS
OPERATING SYSTEM: ANDROID
CPU: QUAD CORE
ROCKCHIP: RK3288
RAM: 2G
ROM: 8G
CAMERA PIXEL: 200W
WORKING METHOD: INFARED FACIAL RECOGNITION AND TEMPERATURE SYSTEM
INSTALLATION: TABLE INSTALLATION

STANDING ON FLOOR
SCREEN SIZE: 8" IPS
OPERATING SYSTEM: ANDROID
CPU: QUAD CORE
ROCKCHIP: RK3288
RAM: 2G
ROM: 8G
CAMERA PIXEL: 200W
WORKING METHOD: INFARED FACIAL RECOGNITION AND TEMPERATURE SYSTEM
INSTALLATION: FLOOR STANDING

Learn More

TILE FACTORY DESIGNED BY SACMI / ITALY
YEAR ESTABLISHED 2014 TO 2016
THIS PLANT IS AN ENVIRONMENTALLY FRIENDLY ENTERPRISE, WHEN IT RECYCLES 100% OF ITS EFFLUENTS AND PERFORMS HEAT RECOVERY, THEREBY SAVING ENERGY

See all pictures:
https://www.flickr.com/photos/183869481@N08/albums/72157710649767958

THE PLANT:
COVERS AN AREA OF 22 THOUSAND SQUARE METERS
THE PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
CERAMIC FLOOR TILES
CERAMIC WALL TILES
BMR POLISHING LINE
BMR SQUARING & CHANFERING LINE
THE MAIN RAW MATERIALS ARE CLAY (DB-4) - 31 %, ALBITE (STD5) - 60 %
NEPHAIIN (PN9595) - 2.5 %, KAOLIN (RHB1) - 6.5 %
ON TOP OF IT THEY ARE USING GLAZE MATERIALS AND PAINTS
•FROM THE MOMENT THE MATERIAL IS PREPARED IT IS BEING DRIED PRESSED ON ONE OF FOUR (4) PRODUCTION LINES.
•TWO (2) LINES ARE WITH SACMI PRESSES OF PH 7,500 TON EACH AND HORIZONTAL DRYERS SACMI
•TWO LINES ARE WITH SACMI PRESSES OF PH 3,590 TON EACH AND VERTICAL DRYERS SACMI
•ALL FOUR (4) LINES HAVE THEIR OWN DIGITAL PRINTING MACHINE INCORPORATED
•ALL PRODUCTS ARE BEING GLAZED AND FIRED ON 1200 DEGREES IN ONE OF THE TWO (2) KILNS, SACMI
FOUR (4) SORTING, PACKING AND PALLETIZING LINES
GLAZE PREPARATION LINE
COMPLETE INSTALLATION FOR SMALL PRODUCTION CAPACITIES
COMPLETE FOILING LINE
COMPLETE ELECTRIC INSTALLATION
POWER GENERATOR UNIT
COMPRESSED AIR INSTALLATION

MACHINES ARE MADE BY:
SACMI: ITALY
NUOVA ERA / ROBOBOX: ITALY
BMR: ITALY
IN.TE.SA: ITALY
CUCCOLINI: ITALY
SYSTEM CERAMICS: ITALY
TGMAC SR.L: ITALY
DURST: GERMANY
ROTOCOLOR MAG: ITALY
NUOVA FIMA: ITALY
OMS: ITALY
MARPAK OMS: ITALY
MESSERSI PACK: ITALY

TILE SIZES
THE FACTORY MANUFACTURES TILES OF VARIOUS SIZES FROM 300 X 300 TO 1200 X 1200mm IN VARIOUS TEXTURES AND DESIGNS USING DIGITAL PRINTING MACHINES
PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
THE FACTORY IS FULLY AUTOMATED AND USING ADVANCED CONTROL SYSTEMS!

HUGE AMOUNT OF ORIGINAL SPARE PARTS AVAILABLE WITH THIS PLANT
THIS PLANT IS AVAILABLE WITH THE COMPLETE ELECTRIC, AIR, GAS, RECYCLING INSTALLATION

THIS PLANT CAN BE SOLD: WITH 4 LINES OR 2 AND 2 LINES

 

Learn More

FECKEN AND KIRFEL VERTICAL FOAM CUTTER FOR SALE

Learn More

BAUMER CNC MACHINE, MODEL OFS-HE3

Learn More

REFERENCE NUMBER: L-6069

EASTMAN STATIC TABLE CUTTING MACHINE MODEL M9000, 20’ X 72’, YEAR 2009

 

STATIC TABLE CUTTING MACHINE

MAKE: EASTMAN

MODEL: M9000

20 FEET LONG X 72 FEET WIDE

PURCHASED IN YEAR 2009

220 VOLT, 1 PHASE

 

QUANTITY: 1

Learn More

COMPLETE CUT PRESSSER PLANT

 

14 MACHINES ARE 168”

3 MACHINES ARE 84”

ALL MACHINES ARE 14 GAUGE

ALL BEAM SHAFTS ARE 4.5” = 114mm

UNOFFICIALLY, WE HAVE SEVERAL BOOKS OF DESIGNS WE PRODUCED OVER THE YEARS

THERE ARE ABOUT 30-40 CHAINS MADE UP ALREADY

4 MACHINES FIT IN ONE CONTAINER

THE WHOLE PLANT CAN FIT IN FIVE FORTY FOOT (40’) CONTAINERS

 

EXCESS OF 10,000 LINKS (COULD BE 20-25,000)

MANY MADE UP PATTERN CHAINS

CUT PRESS CUTTER

SEVERAL BLANK 168” PRESSES

2-3 EXTRA 84” MACHINES FOR PARTS

ANYTHING ELSE IN PLANT PERTINENT TO CUT PRESS

 

ALL MACHINES ARE SPRING BEARD NEEDLE, SO TO CHANGE THE GAUGE YOU WOULD NEED:

(THIS CHANGE IS NOT INCLUDED)

• INSERTS (10 PER 168” MACHINE)
• ADDITIONAL NEEDLES
• SINKERS
• GUIDES
• SLAY POINTS
• CORRECT GAUGE LINKS

 

QUANTITY: 1 PLANT CONSISTING OF 17 MACHINES

 

 

 

 

PLANT IS OFFERED LOADED ON CONTAINERS, IT IS NOW ON THE MILL FLOOR

ALL THE MACHINES WILL BE COMPLETE AND CHECKED OUT BEFORE LOADING

Learn More