Search results for: 'and'

S-1220 KUSTERS CALANDER AND EMBOSSING CALENDER, WORKING WIDTH 3400mm, YEAR 2002

KUSTERS CALANDER AND EMBOSSING CALENDER
MAKE: KUSTERS
YEAR: 2002
TYPE: 213.40/3400
WORKING WIDTH: 3400mm
3 CYLINDERS
COTTON – STEEL – RACOLAN
HYDRAULIC PRESSURE MAXIMUM 40 TONES
COMPLET ENTRY WITH METAL DETECTOR AND SEWING DETECTOR
5 DIFFERENT STEEL EMBOSSING CYLINDERS
PREPARED FOR OIL HEATING WITH PUMP AND VALVES
EXIT WITH SALVADE AXIAL A-FRAME ROLLING DEVICE
INCLUDING TWO MANUAL HAND CRANES
WITH FRAME TO CHANGE THE CYLINDERS

MACHINES ARE STILL RUNNING

QUANTITY: 1

Learn More

YY-2227 USED KUSTER PAD BATCH DYEING PLANT, WORKING WIDTH 2000mm USED CPB-DYEING PLANT ACCORDING TO TYPE 222.11 QUANTITY: 1 CONSISTING OF 2-BOWL DYEING PADDER MAKE: EDUARD KUSTERS TYPE: 222.11 YEAR: COMPL. REFURBISHED BEFORE DELIVERY TECHNICAL DATA: WORKING WIDTH: 2000mm; ROLLER FACE WIDTH: 2200mm; DRIVE SIDE: RIGHT; SERVICE SIDE: LEFT; PRESSURE: 50 KP/CM; TOTAL PRESSURE: 10 TO / 100 NM; SPEED: 60 M/MIN; POWER: 5.5KW; VOLTAGE: 3 X 400 V, 50Hz; AIR CONNECTION: 6 BARS LOCALLY; COLOR OF PAINT: ACCORDING TO AGREEMENT. Learn More

TT-7807 KUSTERS CONTINUOUS BLEACHING RANGE, WORKING WIDTH 3600 TO 3800mm, YEAR 1991 1. KUSTERS CONTINUOUS BLEACHING RANGE 2. FOR FLAT AND TERRY COTTON AND COTTON BLENDED FABRIC 3. YEAR 1991 4. WORKING WIDTH: 3600 TO 3800mm 5. PRODUCTION SPEED: 120M/MIN QUANTITY: 1 Learn More

TT-1588 HUNT & MOSCROP KUSTERS CALENDERS, TABLE WIDTH 2000mm DISMANTLED AND STORED GOOD CONDITION NO SPARE ROLLS QUANTITY: 2 Learn More

WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) REED MODULE (HM6), DROP WIRE MODULE (HM3) AND CONTROL MODULE JAYTEX WARP TYING MACHINE YEAR 2005 WARP TYEING MACHINE JAYTEX TROLLEY WITH TRANSFORMER WITH 2 NOS. TYING FRAMES SETIA KIJJI REED CLEANING MACHINE YEAR 2006 SETIA KIJJI – ULTRA SONIC CLEANING MACHINE REED CLEANER CONSISTS OF RINSING UNIT ULTRASONIC UNIT DRYING UNIT, SEMI AUTOMATIC PROCESS USING PLC. (18 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 EACH – 16 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI ELECTRONIC DOBBY 16 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (48 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 – 10 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 10 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (24 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 2E+06 – 6 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 6 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (2 UNITS) GREY INSPECTION MACHINE YEAR 2006 INSPECTION TABLE IS LAMINATED, PUSH BUTTON CONTROLS ARE GIVEN ON THE DRIVE BOX ON THE RIGHT HAND SIDE, CLOTH CAN RUN IN FORWARD AS WELL AS IN REVERSE DIRECTION FABRIC RUNS FACE IN/FACE OUT SPECIAL JOGGING OR INCHING DEVICE FABRIC FOLDING MACHINE YEAR 2006 SWINGING MOTION IS MINIMIZED TO ENSURE HIGH MACHINE CAPACITY AND INCREASE OUTPUT FOLDING BLADES ARE MOUNTED ON A CARRIAGE WHICH HAS A TO AND FRO MOVEMENT ACHIEVED BY SPECIAL STEEL ROLLER CHAIRS BALE PRESS YEAR 2001 BATH BEI HYDRAULIC BALE PRESS MACHINE FABRIC PROCESSING SINGEING MACHINE YAMUNA SINGEING MACHINE WIDER WIDTH – YEAR 2006 (2 UNITS) HYDRAULIC JIGGER KUSTER CALICO YEAR 2006 3E+06 VERTICAL DRYING RANGE YEAR 2006 CONTINUOUS DYEING RANGE – KUSTER CALICO KUSTER CALICO COLD PAD BATCH YEAR 2006 HARISH STENTER – SUPRA 5 DLXI ALMAC FINISH INSPECTION MACHINE YEAR 2006 SHRI NARAYAN COTEX FINISH PLAITING MACHINE YEAR 2006 Learn More

TT-6643 KUSTERS OPEN WIDTH BLEACHING LINE, WORKING WIDTH 3800mm, YEAR 1991 1. FOR THE TREATMENT OF FLAT FABRIC AND COTTON/COTTON BLEND TERRY FABRIC. 2. 9 WASHING VATS. 3. ROLLER WIDTH: ENTRY 4000mm, DELIVERY 3800mm 4. USEFUL WORKING WIDTH: ENTRY 3800mm, DELIVERY 3600mm 5. PRODUCTION SPEED: UP TO 120 M/MIN. 6. ENTRY FABRIC TYPE 288.09 FROM BIG BATCH WORKING WIDTH 3800mm, WITH E+L SELVEDGE WIDENER MODEL KF 2020 L 7. 1 WASHING TANK MODEL COMPACTA-D MODEL 236.38, WITH FABRIC CONTENT 30 MT., USEFUL WORKING WIDTH 3800mm 8. 1 SQUEEZER MANGLE WITH TWO CYLINDERS, TYPE 225.23, USEFUL WORKING WIDTH 3800mm QUANTITY: 1 Learn More

TT-2187 KUSTERS COLD PAD BATCH, WORKING WIDTH 2800mm, YEAR 2004 TYPE 222.17-2800 YEAR 2004 CAN FIT IN A 40 FOOT CONTAINER QUANTITY: 1 Learn More

TT-1589 BASAGOITIA KUSTER CALENDER, TABLE WIDTH 3510mm, YEAR 2002 INCLUDED: SPARE ROLLS, HYDRAULIC GROUP AND PANEL CONTROLS DISMANTLED AND STORED ON A WAREHOUSE QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5234 (1313LBEMXX12) L KUSTERS DYEING PADDER YEAR 1987 WORKING WIDTH 1800mm KUSTERS DYEING PADDER MODEL 222.11.1800 WORKING WIDTH 1800mm YEAR 1987 TO 2002 QUANTITY AVAILABLE: 1 Learn More

TT-8594 KUSTERS CALANDER TYPE 212.50-1800, WORKING WIDTH 1800mm, YEAR 1986 1. KUSTERS CALANDER 2. TYPE 212.50-1800 3. YEAR 1986 QUANTITY: 1 Learn More