Search results for: 'Needle'

T-7951PRE AND FINISH – NEEDLER, WIDTH 2800mm TO 2900mm ITEM 001 PRE - NEEDLER QUANTITY: 1 ITEM 002 FINISH - NEEDLER QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6868 NEEDLE PUNCH LINE, EXIT WIDTH 2200/2500mm, CAPACITY 400 KGS, OVERHAULED AND UPDATED 2012 AND 2015 NEEDLE PUNCH LINE EXIT WIDTH 2200/2500mm OVERHAULED AND UPDATED IN 2012/2015 TECHNOLOGY CONTROL BY S7 DESIGNED AND USED FOR NATURAL FIBRES, GLASS FIBRES, RECYCLED FIBRES 100% OR MIXED WITH PP FOR BASIC MATERIALS OF THE AUTOMOTIVE INDUSTRY CAPACITY: 400 KGS ITEM 001 2 BALE OPENER BRAND TEMAFA WORKING WIDTH: 1400mm WOODEN LATICE BELTS WOODEN TRANSPORT LATTICE VERY GOOD CONDITION INDIVIDUAL CONTROL OF OPENING AND MIXING ITEM 002 WILLOW BRAND TEMAFA 4 PAIRS STRIPPING AND WORKING ROLLERS WORKING WIDTH: 1400mm WITH VENTILATOR AND PIPE SYSTEM TO CHUTE FEED AND HOPPER FEEDER ITEM 003 CHUTE FEED BRAND TEMAFA WORKING WIDTH: 2700mm CONTROL OF FILLING HEIGHT BY ULTRASOUND SENSORS ITEM 004 HOPPER FEEDER BRAND OCTIR (RSP) GROUND BELT BY WOODEN LATTICE AND DRIVEN BY SEPARATE DRIVE VIA ECCENTRIC VIBRATION WALL MOBILE FRON WALL ITEM 005 CARDING MACHINE WORKING WIDTH: 2500mm 5 PAIRD STRIPPER AND WORKER INSTALLED 1 PAIR STRIPPER/WORKER SEPARATE DELIVERY INDIVIDUAL DRIVE SYSTEMS RIGID CARD CLOTHING MAIN DRUM 1600mm DIAMETER DOFFER DRUM 1200mm AND FLY COMB ITEM 006 CROSS LAPPER WEB FEEDING BY TRANSILON-BELTS EXIT BELT AS WOODEN LATTICE BELT ITEM 007 PRE-NEEDLE MACHINE BRAND DILO MODI DVM25 WORKING WIDTH: 2500mm ALL BELT SYSTEMS USE WOODEN LATTICE BELTS 1 NEEDLE BOARD NEEDLING FROM TOP TO BOTTOM ITEM 008 NEEDLE MACHINE BRAND ASSELIN WORKING WIDTH: 2200mm 4 NEEDLE BAR MACHINE (2 TOP/2 BOTTOM) ALTERNATING AND SIMULTANEOUS WORKING METHODS BY MODIFICATION OF DRIVING BELT WAYS PULL-OUT ROLLERS AT EXIT STROKE HEIGHT 40mm ITEM 009 ROLLING MACHINE 3 LONGITUDINAL CUTTER (TOP AND BOTTOM DRIVEN) 1 CROSS CUTTER CONTROL OF THE LINE: SEPARATE SYSTEM FOR BALE OPENING AND MIXING S7 CONTROL FOR COMPLETE LINE UPR TO DATE LEVEL, AIRCONDITIONED, CONTROL CABINETS CLOSE TO MACHINE OR SEPARATE MACHINES ARE IN VERY GOOD AND UPDATED CONDITION Learn More

REFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More

P-3227 STRUCTURING NEEDLE LOOM, WIDTH 2500mm

STRUCTURING NEEDLE LOOM
WIDTH: 2500mm
LAMELLA GUAGE 4.7mm

QUANTITY: 2

Learn More

P-3225 DR. ERNST FEHRER AG AUSTRIA NL 11 STRUCTURING NEEDLE LOOM, WIDTH 4880mm, YEAR 1974

DR. ERNST FEHRER AG AUSTRIA
TYPE: NL 11
STRUCTURING NEEDLE LOOM
YEAR: 1974
WORKING WIDTH: 4880mm

QUANTITY: 1

Learn More

MODEL: BG-450 NEEDLING SPEED: 0 TO 1000 RPM DOWN STROKE 60mm NEEDLE DENSITY: 5000 NEEDLES PER LINEAR METER PINHOLE DIAMETER: Ø1.83mm ACTUAL WIDTH OF NEEDLE PLATE: 4500mm STRIP PLATE AND SCREEN PLATE: ALL PINHOLES ARE BEVELLED, SURFACE CHROME-COATED, COMPUTERIZED DRILLING FEED SPEED: 0.6 TO 6M/MIN (NORMALLY BETWEEN 2.5 AND 4M/MIN) MAIN MOTOR: 22KW INVERTER CONTROL FEEDING AND DISCHARGING MOTOR: 2.2KW EACH, INVERTER CONTROL MOTORS FOR STRIP PLATE AND SCREENING PLATE: 1.5KW×2, POWER-DRIVEN WORM-GEAR LIFT, WITH RULER AND TRAVEL SWITCHES PVC APRON FEEDING, CHROM-COATED DOUBLE-ROLLER DISCHARGING UP AND DOWN CONTROL: PNEUMATIC CONTROL TOTAL POWER: 27.2KW QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-4010

NEEDLE PUNCHING PRODUCTION LINE, WORKING WIDTH 3000mm TO 6000mm, YEAR 2005

 

DETAILS:

 

OFFER 001

NEEDLE PUNCHING PRODUCTION LINE

YEAR: 2005

WORKING WIDTH: 6000mm

WEIGHT: 120 TO 800 G/M²

MATERIAL: PP, PES

CAPACITY: 600 KG/H

WITH FOLLOWING FIBERS:

6.7 DTEX

FIBER LENGTH: 60 TO 90mm

WORKING HOURS: CA. 41000 H

 

CONSISTS OF:

OFFER 002

BALE OPENER

MAKE: FALUBAZ

FEEDING TABLE: 1000mm WIDTH

2000mm LENGTH

WITH ELECTRONICALLY WEIGH BOXES

COLLECTING CONVEYOR

AND MIXING UNIT

QUANTITY: 4

 

OFFER 003

CHAMBER FIBER MIXING UNIT

QUANTITY: 6

 

OFFER 004

FINE OPENER

WITH METAL DETECTOR

QUANTITY: 1

 

OFFER 005

DUST COLLECTION UNIT

QUANTITY: 2

 

OFFER 006

FOR VOLUMETRIC HOPPER FEEDER

MAKE: FOR

TYPE: HF

QUANTITY: 1

 

OFFER 007

FOR CARDING MACHINE

MAKE: FOR

TYPE: WM 2+2

WORKING WIDTH: 3000mm

BREAST: 3X WORKERS / STRIPPERS

TAMBOUR: 4X WORKERS / STRIPPERS

DOUBLE DOOFER

CONDENSING SYSTEM

QUANTITY: 1

 

OFFER 008

AUTOMATEX CROSSLAPPER

MAKE: AUTOMATEX

TYPE: FA 5000/TC

WITH PROFILING

QUANTITY: 1

 

OFFER 009

ASSELIN WEB DRAFTER

MAKE: ASSELIN

TYPE: ETO-15

ROLLERS: 15

QUANTITY: 1

 

OFFER 010

AUTOMATEX PRE – NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: PR160/T

NEEDING: DOUBLE BOARD DOWN

NEEDLES: 2X 8000 N/M

STROKE: 55mm

INCLUSIVE CBF FEEDING SYSTEM

QUANTITY: 1

 

OFFER 011

AUTOMATEX NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: AG160/TB

NEEDING: 4 BOARD QUATTRO PUNCH

NEEDLES: 4X 8000 N/M

STROKE: 65mm

QUANTITY: 1

 

OFFER 012

BELMATEX ACCUMULATOR

MAKE: BELMATEX

QUANTITY: 1

 

OFFER 013

BELMATEX END OF LINE

MAKE: BELMATEX

SLITTER

WINDER

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

M-4892 HIGH-SPEED NEEDLE PUNCHING MACHINE

MACHINE WIDTH: 2000mm TO 9200mm
NEEDLE DENSITY: 4000 TO 8000N/M
NEEDLE STROKE 30mm TO 60mm
PUNCHING FREQUENCY: 800 TO 1200S/MIN

QUANTITY: 1

Learn More

TT-1196 NONWOVEN MACHINES FOR NEEDLEFELTS PRODUCTON, YEAR 1995 TO 2015 MACHINES FOR THE PRODUCTION OF NEEDLEPUNCHED FELTS 1. BLENDING THT YEAR 2015 2. OPENING: THT YEAR 2015 3. CARDING: F.O.R. YEAR 1995 UPDATED ON 2015 4. CROSSLAPPING: GUASCH YEAR 2000 UPDATED ON 2015 5. NEEDLEPUNCHING: CHANGSHU SNM YEAR 2015 6. SLITTING. CROSSCUTTING & WINDING: THT YEAR 2015 Learn More

REFERENCE NUMBER: T-6852 AUTEFA, DILO, SPINNBAU NEEDLE-PUNCHING COMPLETE LINE BRAND: AUTEFA, DILO, SPINNBAU SHORT DESCRIPTION: NEEDLE-PUNCHING COMPLETE LINE 3° NEEDLE-PUNCHING COMPLETE LINE (1970 CA.) COMPOSED OF: 1 SINGLE DOFFER CARD BY “BESSI” WORKING WIDTH 2500mm - HOPPER-FEEDER “TEMAFA” WITH SCALE (WEIGHPAN) AND TOP SILO - BREAST UNIT DIAMETER 1500mm WITH 7 PAIRS WORKERS/STRIPPER DIAMETER 220/74, RIGID METALLIC WIRES STILL USABLE 60% APPROX. - TRANSPORT ROLL DIAMETER 1285mm, RIGID WIRES STILL USABLE FOR 80% APPOX - SWIFT DIAMETER 1500mm, 6 PAIRS WORKERS/STRIPPER DIAMETER 215/74, SWIFT WITH RIGID WIRES STILL USABLE 90% CA., FLEXIBLE WIRES FOR WORKERS STILL USABLE 80% APPROX - DOFFER DIAMETER 1500mm, FRIGID WIRES STILL USABLE 90% APPROX. - FLY-COMB 1 CROSSLAPPER “MAK-AUTEFA”, INLET WORKING WIDTH 2500mm, EXIT WORKING WIDTH 3000mm 1 PRE-NEEDLER “DILO” NFZ25, MATR. 2387/1965, NO. 2580 NEEDLES/LM WITH MOBILE STRIPPER PLATE FOR HEAVY FELTS 1500 GRS/SQM AND/OR VOLUMINOUS FIBERS 2 LONGITUDINAL CUT “MACCHI” 1 TRANSVERSAL CUT “SPINNBAU” 1 WINDER IN WEIGHTING CELLS (METTLER) QUANTITY: 1 Learn More