Search results for: 'electric co'

REFERENCE NUMBER: L-4868
TRUTZSCHLER PART: GRADE "4",NEEDES MECHANICAL AND ELECTRICAL PARTS
AUTOMATEX 2 METER NEEDLE LOOM, GRADE "5" 

TRUTZSCHLER FORMER: UP TO 2.5 METERS WIDE

QUANTITY: 1 

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

C-4294 AUTOMATEX CROSS LAPPER, SPEED 65 M/MIN, WIDTH EXIT 3500mm, YEAR 2006

CROSS LAPPER
BRAND: AUTOMATEX
MODEL: FA 3000 TC
YEAR: 2006
YEAR COMPLETE RENEWED: 2010 FROM COMPANY AUTOMATEX
SPEED: 65 M/MIN
WIDTH ENTRANCE: 3000mm
WIDTH EXIT: 3500mm
IN THIS MACHINERY THE TIMING BELTS
AND CONVEYOR BELTS ARE IN GOOD CONDITIONS
WE WILL DISMANTLED PERSONALLY
AND THERE WILL BE ALSO ALL THE ELECTRICAL CABLES

QUANTITY: 1

A-1791 AUTOMATEX FA 2000 CROSS LAPPER, YEAR 1997

RENEWED IN 2009
WIDTH ENTRANCE: 3000 mm
WIDTH EXIT: 4500 mm
THE MACHINE IS DISMANTLED PERSONALLY
IT’S COMPLETE WITH ALL THE COMPANENTS
ALL ELECTRICAL CABLES
NEED TO REPLACE ONLY THE BELTS AND THE CONVEYOR BELT

QUANTITY: 1

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

M-3729 BEMATIC THERMOBONDING LINE, WIDTH 2500mm, YEAR 2012

THERMOBONDING LINE
MAKE: BEMATIC
YEAR: 2012
WIDTH: 2500mm

OFFER 001
BEMATIC AC-1500 BALE OPENERS

OFFER 002
BEMATIC AF-700 OPENER/MIXER

OFFER 003
BEMATIC BLOW SM-2000 FEEDING TOWER AND MIXER

OFFER 004
BEMATIC BCV VOLUMETRIC HOPPER FEEDER

OFFER 005
BEMATIC HI 91 CARD

OFFER 006
TEXNOLOGY EVOLUTION CROSSLAPPER

OFFER 007
BOMBI MECCANICA TFP/2N/3/FB OVEN

OFFER 008
BOMBI MECCANICA TG2.9/3 SLITTING AND CROSS-CUTTING UNIT

QUANTITY: 1 LINE

C-4227 EREMA RM120TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 120mm, YEAR 2000 - NEW

EREMA PELLETIZING LINE NEW
MODEL: RM120TVE FILM/FIBER
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
EREMA MODEL RM120TVE
120mm EXTRUDER WITH 36/1 L/D DOUBLE VENTED BARREL
EXTRUDER IS DRIVEN BY A 160KW AC MOTOR WITH INVERTER
DOUBLE VENT INCLUDES A STAINLESS STEEL DEKER VACUUM PUMP
APPROXIMATELY 50 CUBIC FOOT STAINLESS STEEL CUTTER/COMPACTOR MOUNTED AT FEED SECTION
AND FED BY A 35″ WIDE X 20′ LONG INCLINED BELT CONVEYOR
CUTTER COMPACTOR DRIVEN BY A 105 KW
480 VOLT AC MOTOR

QUANTITY: 1 LINE

V-1280 DREF II, 12/E12, 10 INCH CYLINDRICAL, YEAR 1986

DREF II
12/E12
YEAR: 1986

QUANTITY: 1

P-3225 DR. ERNST FEHRER AG AUSTRIA NL 11 STRUCTURING NEEDLE LOOM, WIDTH 4880mm, YEAR 1974

DR. ERNST FEHRER AG AUSTRIA
TYPE: NL 11
STRUCTURING NEEDLE LOOM
YEAR: 1974
WORKING WIDTH: 4880mm

QUANTITY: 1

C-3964 JAGENBERG CUTTING MACHINE, WIDTH 1800mm, YEAR 1973 TO 2006

JAGENBERG CUTTING MACHINE
BRAND: JAGENBERG
YEAR: 1973 TO 2006
WIDTH: 1800mm

QUANTITY: 1