Search results for: 'carding ma'

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More

REFERENCE NUMBER: M-1027 NEEDLE PUNCHING PLANT COMPLETE WITH 6 FEHRER NEEDLE LOOMS YEAR 1993 ARTIFICIAL LEATHER PRODUCING AND OTHER HIGH/EXTRA-HIGH DENSITY PRODUCING NONWOVEN NEEDLE PUNCHING LINE COMPLETE WITH 6 SETS FEHRER NEEDLE PUNCHING LOOMS YEAR: 1993 PLANT IS RUNNING CAN BE INSPECTED QUANTITY AVAILABLE: 1 Learn More

P-3457 THIBEAU CARD CA11-R3P5PP (LL), WIDTH 3500mm, YEAR 1997

THIBEAU
MODEL: CA 11
TYPE: R3P5PP (LL)
CARDING MACHINE
YEAR: 1997
WORKING WIDTH: 3500mm
DELIVERY WEIGHT 26 to 40 GR/SQM
DELIVERY SPEED UP TO 90m/min
PRODUCTION CAPACITY APPROXIMATELY 700 KILOGRAMS PER HOUR
WEIGHING SYSTEM ACE
WIDTH: 3500mm
TRUTZSCHLER
EXACTAFEED FBK
WIDTH: 3500mm
THE MACHINES ARE IN VERY GOOD CONDITION BECAUSE THEY HAVE BEEN USED FOR SOME MONTHS ONLY
NOW THEY ARE DISMANTLED AND STORED IN DRY WARE HOUSE
THE CARDING MACHINE IS PACKED INTO WOODEN BOXES

QUANTITY: 1

Learn More

M-3729 BEMATIC THERMOBONDING LINE, WIDTH 2500mm, YEAR 2012

THERMOBONDING LINE
MAKE: BEMATIC
YEAR: 2012
WIDTH: 2500mm

OFFER 001
BEMATIC AC-1500 BALE OPENERS

OFFER 002
BEMATIC AF-700 OPENER/MIXER

OFFER 003
BEMATIC BLOW SM-2000 FEEDING TOWER AND MIXER

OFFER 004
BEMATIC BCV VOLUMETRIC HOPPER FEEDER

OFFER 005
BEMATIC HI 91 CARD

OFFER 006
TEXNOLOGY EVOLUTION CROSSLAPPER

OFFER 007
BOMBI MECCANICA TFP/2N/3/FB OVEN

OFFER 008
BOMBI MECCANICA TG2.9/3 SLITTING AND CROSS-CUTTING UNIT

QUANTITY: 1 LINE

Learn More

C-3932 TEMAFA CARDING WILLOW 0201, WIDTH 1200mm, YEAR 1987

TEMAFA CARDING WILLOW
BRAND: TEMAFA
TYPE: 0201
YEAR: 1987
WIDTH: 1200mm 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6868 NEEDLE PUNCH LINE, EXIT WIDTH 2200/2500mm, CAPACITY 400 KGS, OVERHAULED AND UPDATED 2012 AND 2015 NEEDLE PUNCH LINE EXIT WIDTH 2200/2500mm OVERHAULED AND UPDATED IN 2012/2015 TECHNOLOGY CONTROL BY S7 DESIGNED AND USED FOR NATURAL FIBRES, GLASS FIBRES, RECYCLED FIBRES 100% OR MIXED WITH PP FOR BASIC MATERIALS OF THE AUTOMOTIVE INDUSTRY CAPACITY: 400 KGS ITEM 001 2 BALE OPENER BRAND TEMAFA WORKING WIDTH: 1400mm WOODEN LATICE BELTS WOODEN TRANSPORT LATTICE VERY GOOD CONDITION INDIVIDUAL CONTROL OF OPENING AND MIXING ITEM 002 WILLOW BRAND TEMAFA 4 PAIRS STRIPPING AND WORKING ROLLERS WORKING WIDTH: 1400mm WITH VENTILATOR AND PIPE SYSTEM TO CHUTE FEED AND HOPPER FEEDER ITEM 003 CHUTE FEED BRAND TEMAFA WORKING WIDTH: 2700mm CONTROL OF FILLING HEIGHT BY ULTRASOUND SENSORS ITEM 004 HOPPER FEEDER BRAND OCTIR (RSP) GROUND BELT BY WOODEN LATTICE AND DRIVEN BY SEPARATE DRIVE VIA ECCENTRIC VIBRATION WALL MOBILE FRON WALL ITEM 005 CARDING MACHINE WORKING WIDTH: 2500mm 5 PAIRD STRIPPER AND WORKER INSTALLED 1 PAIR STRIPPER/WORKER SEPARATE DELIVERY INDIVIDUAL DRIVE SYSTEMS RIGID CARD CLOTHING MAIN DRUM 1600mm DIAMETER DOFFER DRUM 1200mm AND FLY COMB ITEM 006 CROSS LAPPER WEB FEEDING BY TRANSILON-BELTS EXIT BELT AS WOODEN LATTICE BELT ITEM 007 PRE-NEEDLE MACHINE BRAND DILO MODI DVM25 WORKING WIDTH: 2500mm ALL BELT SYSTEMS USE WOODEN LATTICE BELTS 1 NEEDLE BOARD NEEDLING FROM TOP TO BOTTOM ITEM 008 NEEDLE MACHINE BRAND ASSELIN WORKING WIDTH: 2200mm 4 NEEDLE BAR MACHINE (2 TOP/2 BOTTOM) ALTERNATING AND SIMULTANEOUS WORKING METHODS BY MODIFICATION OF DRIVING BELT WAYS PULL-OUT ROLLERS AT EXIT STROKE HEIGHT 40mm ITEM 009 ROLLING MACHINE 3 LONGITUDINAL CUTTER (TOP AND BOTTOM DRIVEN) 1 CROSS CUTTER CONTROL OF THE LINE: SEPARATE SYSTEM FOR BALE OPENING AND MIXING S7 CONTROL FOR COMPLETE LINE UPR TO DATE LEVEL, AIRCONDITIONED, CONTROL CABINETS CLOSE TO MACHINE OR SEPARATE MACHINES ARE IN VERY GOOD AND UPDATED CONDITION Learn More

REFERENCE NUMBER: C-2481 NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL, WIDTH 2500mm, YEAR 2007 TO 2012 SPECIFICATIONS: NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL YEAR OF CONSTRUCTION: VARIOUS, PLEASE SEE BELOW. THE LINE IS CONSISTING OF: BALE OPENER WITH CARDING WILLOW. METAL SEPARATOR MADE IN APPROX. 2007. PASS THROUGH CLEANER MADE IN APPROX. 2007. HOPPER FEEDER WITH FINE OPENER, RECONDITIONED EQUIPMENT. 2 LARGE BLENDING BINS WITH BIN EMPTIER, RECONDITIONED IN 2009. COMPLETE SUCTION AND AIR FILTRATION UNIT WITH DRUM FILTER AND COARSE FIBER PRE FILTER WITH FIBRE COMPACTOR AS WELL AS FINE DUST SEPARATOR. HOPPER FEEDER WITH RESERVE CHUTE. AIRLAY LINE MADE IN 2011. 2500 mm WORKING WIDTH. DOUBLE BAND OVEN MADE IN 2010, VERY EFFICIENT. LONGITUDINAL CUTTING DEVICE WITH 6 DRIVEN UPPER AND LOWER KNIVES. CROSS CUTTER WITH STRONG POWER, MADE IN 2012. VARIOUS VENTILATORS, CONDENSER, PIPES, PIPE SWITCHES, EVENTUALLY ALSO INCLUDING ELECTRO FORK LIFT WITH BALE CLAMP. THE LINE IS SUITABLE TO PROCESS WOOL AS WELL AS OTHER SHORT AND SHORTEST FIBERS, ALSO RECYCLED COTTON. CAPACITY OF THE LINE: APPROX. 350 TO 400 KG/H. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: F-1422 BALE BREAKER/FIBER MIXING SYSTEM 03E (NEW) MACHINE IS USED TO MIX FIBERS (SILICONIZED, NON-SILICONIZED POLYESTER, LOW MELT POLYESTER, CONJUGATE, HOLLOW POLYESTER FIBER) IN DIFFERENT RATIO AND SEND TO THE CARDING MACHINE. TECHNIQUE DATA: CAPACITY: 400 TO 600KG/H TOTAL POWER: 4.45KW PRE-OPENING MACHINE POWER: 7KW MACHINE WORKING WIDTH: 1200mm PRE-OPENER WORKING WIDTH: 1000mm WEIGHING CAPACITY: 1500GM WEIGHING TOLERANCE: 6% VOLUME OF WEIGHING HOPPER: 0.3M³ WEIGHING SPEED: 3 TO 5 TIMES/MIN OVERALL MACHINE DIMENSIONS: 6300mm × 3360mm × 1300mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2480 NON-WOVEN LINE, WIDTH 1400mm, YEAR 1992 TO 2007 SPECIFICATIONS: NONWOVEN LINE YEAR OF CONSTRUCTION 1992 + 2007. THE LINE IS SUITABLE TO OPEN BALES AND TO PRODUCE A WEB FOR FILLING DISPOSABLE BED SHEETS. THE LINE IS CONSISTING OF: BALE OPENING MACHINE YEAR OF CONSTRUCTION 1992. WEB FORMING MACHINE BONINO. YEAR OF CONSTRUCTION 2007. WIDTH 1400 mm. CAPACITY 40 TO 50 METERS / MIN. END SECTION OF CARDING MACHINE TRAVERSI + ARMENTI. YEAR OF CONSTRUCTION 2007. MACHINE WIDTH 1500 mm. EXTRACTOR FAN. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3561

LINE FOR THERMO BONDED WADDING YEAR 1987 - FOR MATTRESS AND BUILDING SECTOR, ETC

 

LINE FOR THERMO BONDED WADDING  -YOC  1987  - FOR MATTRESS AND  BUILDING SECTOR, ETC.

( ESPECIALLY IN POLYESTER + NATURAL FIBERS MIXED).

THE LINE HAS A PRODUCTION OF 350/400 KGS PER HOUR WITH A WORKING WIDTH FROM 150 CMS INTIL 240.

 

COMPOSITION :

. BONINO LOADER   WORKING WIDTH  mm. 2800

. BONINO CARDING MACHINE WORKING WIDTH  mm. 2800 SINGLE DOFFER

. TECHNOPLANTS CROSS LAPPER WORKING WIDTH   ENTRY/EXIT mm. 3000

. SICAM OVEN  - 2 FIELDS. WORKING WIDTH  2400 mm. + COOLING SECTION

. TECNICA TESSSILE CUTTING MACHINE WITH HORIZONTAL AND VERTICAL CUT WORKING WIDTH  mm. 3000

. MECAP  PACKAGING MACHINE FOR ROLLS

 

QUANTITY: 1

Learn More