Search results for: 'Drive'

TT-6314 SML- LENZING COATING LINE, WORKING WIDTH 1500mm 1. SML- LENZING COATING LINE 2. WORKING WIDTH: 1500mm 3. LINE LENGTH: 14000mm 4. WIDTH: 12,000mm 5. HEIGHT: 4000mm 6. LINE SPEED UP TO 60 METERS / MINUTE 7. MAXIMUM PERFORMANCE: 8. PP: 160 KG / H 9. LDPE: 180 KG / H QUANTITY: 1 Learn More

TT-7720 NORDMECCANICA SUPERSIMPLEX LAMINATOR / COATING MACHINE SOLVENTLESS, WORKING WIDTH 1300mm, YEAR 2014 1. NORDMECCANICA SUPERSIMPLEX LAMINATOR / COATING MACHINE SOLVENTLESS 2. DEPENDING ON THEIR CONSTRUCTION AND THE CONSTRUCTION OF THEIR COATING UNITS, LAMINATORS CAN APPLY DIFFERENT TYPES OF GLUE. 3. BRAND: NORDMECCANICA 4. MODEL: SUPERSIMPLEX 5. YEAR: 2014 QUANTITY: 1 Learn More

TT-6094 COATING LINE FROM BATH MAT PLANT, WIDTH 7000mm, YEAR 2024 COATING LINE FROM BATH MAT PLANT LENGTH 97000mm WIDTH 7000mm ARTOS LATEX FOR BATHMATSB YEAR OF CONSTRUCTION: 2024 WORKING WIDTH: 1000mm TO 2600mm MAXIMUM SETTING WIDTH: 2750mm SPEED: 1.7 METERS TO 35 METERS PER MINUTE Learn More

TT-5470 FULL AUTOMATIC COATER LINE FOR GLASS SUBSTRATE, 305mm COATER FOR GLASS SUBSTRATE TO COAT 12” X 12” (305mm X 305mm) GLASS SUBSTRATE FULL AUTOMATIC COATER LINE (SPRAY MACHINE WITH OVEN) Learn More

TT-1431 SLOT DIE COATING MACHINE, COATING WIDTH 1600mm PARAMETERS 1. COATING METHOD: SLOT DIE COATING 2. MAX. COATING WIDTH: 1600mm 3. COATING WEIGHT: 50 TO 300 GSM 4. UNIFORMITY: ≤10% 5. MECHANICAL SPEED: 1 TO 20 METERS PER MINUTE 6. COATING SPEED: THE COATING SPEED IS DETERMINED ACCORDING TO THE COATING WEIGHT, QUANTITY, ADHESIVE VISCOSITY, THE TEMPERATURE AND THE SUBSTRATE. 7. ROLLER WIDTH: 1750mm (ACTUAL WORKING WIDTH OF PAPER ROLL IS 1600mm) 8. MAX. UNWINDING DIAMETER: 1250mm 9. MAX. REWINDING DIAMETER: 950mm 10. UNWINDING TENSION: ≤600N 11. FILM UNWINDING TENSION: ≤200N 12. WINDING TENSION: ≤600N 13. GLUE MELTING SPEED: 310 KG/HOUR 14. GLUE INPUT HOSE: TEFLON TUBE 15. GLUE MELTING TEMPERATURE: ABOUT 260°C MAXIMUM 16. MECHANICAL POWER: ABOUT 40 KW 17. INSTALLED POWER: ABOUT 110 KW 18. POWER SUPPLY: ABOUT 440 VOLTS, 60Hz 19. AIR SOURCE: 0.6 TO 0.8 MPA 20. WATER SOURCE: 0.15 TO 0.4 MPA CIRCULATING COOLING WATER 21. DIMENSIONS: 9000 (LENGTH) X 6600 (WIDTH) X 2300mm 22. THE AMOUNT OF GLUE AND THE GLUE SPEED ARE TRACKED SYNCHRONOUSLY, AND CAN ALSO BE ADJUSTED INDEPENDENTLY QUANTITY: 1 Learn More

YY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLER DETAILS: 1. COMBINED COATING MACHINE FOR ONE FINISHING AND COATING NOMINAL WIDTH 1800mm. MAXIMUM COATING WIDTH: BY KNIFE 1650mm, BY ENGRAVED ROLLER 1750mm WITH FOLLOWING WORKING MODES POSSIBILITIES: - REVERSE ROLL - SYNCHRO ROLL - REVERSE ROLL "ON AIR" - SYNCHRO ROLL "ON AIR" - BLADE "ON AIR" - BLADE ON COUNTER- ROLLER COMPOSED OF: - WELDED STEEL FRAMEWORK WITH HIGH; - ORSION RIGIDITY; - RUBBERIZED COUNTER-ROLLER DIAMETER 400mm, OIL AND SOLVENTS RESISTANT; - HARDNESS 85 SHORE A, MAX ECCENTRICITY TOLERANCE ±1/100mm; - A/C GEARMOTOR TO DRIVE THE COUNTER ROLLER; - ROLLER CHANGING DEVICE (BRIDGE), ARRANGED TO MOUNT TWO ENGRAVED ROLLERS AND ONE COATING KNIFE; - PNEUMATIC LIFTING OF CHANGING DEVICE (BRIDGE); - MANUAL ROTATION OF THE ROLLER CHANGING DEVICE; - MOTORIZED MICROMETRIC ADJUSTMENT OF COATING THICKNESS, INDEPENDENT RIGHT/LEFT OR IN TANDEM, WITH DIGITAL DISPLAY ON CONTROL PANEL, BY TWO JACKS; - COATING SIDE LIMITERS, MANUALLY ADJUSTABLE EITHER SINGLE OR TANDEM; - FEEDING THROUGH IN FRONT OF THE COATING KNIFE; - A/C GEARMOTOR TO DRIVE THE ENGRAVED ROLLER; - TWO COLOUR DOCTOR BLADES (SYNCHRO / REVERSE) WITH PNEUMATIC OPENING AND CLOSING FOR A SMOOTHER MOVEMENT OF THE BLADE TOWARDS THE ROLLER, WITH OSCILLATING MOVEMENT; - ENTRY IDLER ROLLER, THE UPPER ONE LIFTABLE BY PNEUMATIC PISTONS FOR "ON AIR" COATING; - PIPING FOR THE WASHING OF THE ENGRAVED ROLLER; - TWO SIDE GUTTERS IN STAINLESS-STEEL WITH TEFLON COATING, WITH SOLVENT RESISTANT RUBBER PIPE FOR WASTEWATER OR CHEMICALS COLLECTION AND RECIRCULATION; - WASTEWATER RECOVERY BASIN, WITH DRAIN, UNDER THE COUNTER-ROLLER; - MANUAL SEAM JUMPER; - VARIABLE SPEED FROM 2,5 TO 50 M/MIN FOR THE COUNTER-ROLLER AND FROM 2,5 TO 99 M/MIN FOR THE ENGRAVED ROLLER; - PIVOTING CONTROL PANEL WITH DIGITAL SCREEN, MOUNTED ON THE MACHINE FRAME, TO CONTROL AND SET THE MACHINE FUNCTIONS; - MAIN ELECTRICAL PANEL EQUIPPED WITH PLC AND INVERTERS, PROTECTION IP54, MOUNTED INSIDE THE LEFT HAND MACHINE SHOULDER; - SET OF MACHINE ACCESSORIES AND INSTRUCTION & MAINTENANCE MANUAL. Learn More

C-4013 VILLARS AG SCATTER- COATING AND LAMINATING MACHINE, WORKING WIDTH 1000mm, YEAR 1994

MAKE: VILLARS AG
YEAR: 1994
WORKING WIDTH: 1000mm
WORKING SPEED: 0 TO 10 M/MIN
ELECTRICAL POWER: 3 X 400 VOLT + PN + PE, 50 HZ
POWER: 140 KW
WEIGHT: 8637 KGS

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4788 (1111KYWJXX10) L ER-WE-PA EXTRUSION COATER LAMINATOR YEAR 1985 WEB WIDTH 1575mm ER-WE-PA EXTRUSION COATER LAMINATOR, 1985 YEAR WEB WIDTH: 1575 mm (62 IN) L/D(S): 30:1 DRIVE SYSTEM: DC DRIVE SPEED: 366 MPM (1200 FPM) EXTRUDER(S): ER-WE-PA PRIME COATER: NONE SIZE(S): 4-1/2" 3-1/2" PRIMARY UNWIND: NONE SECONDARY UNWIND: NONE REWIND: NONE DRYER TYPE: NONE USED ER-WE-PA EXTRUSION COATER LAMINATOR STATION EQUIPPED WITH EXTRUSION COATER WITH 27" DIAMETER X 72" FACE CHILL ROLL 7.5" DIAMETER RUBBER COVERED NIP ROLL, 12" DIAMETER CHROME BACKING ROLL, 14" DIAMETER SECONDARY CHILL ROLL, RAZOR EDGE TRIM SECTION 72" EDI/WELEX AUTOFLEX SHEET EXTRUSION DIE DIE WITH EXTERNAL DECKLING 4.5" AND 3.5" ER-WE-PA EXTRUDERS WITH 30:1 L/D; EXTRUDERS MOUNTED ON XYZ CARRIAGE. MACHINE DOES NOT INCLUDE AN UNWIND OR REWIND. QUANTITY AVAILABLE: 1 Learn More

TT-8569 BRUCKNER STENTER WITH COATING, WIDTH 3000mm, YEAR 2001 1. BRUCKNER STENTER WITH COATING 2. YEAR 2001 3. TWIN FLOW 4. ROLLER WIDTH 3000mm MACHINE IS IN EXCELLENT WORKING CONDITION. Learn More

TT-8164 WALDRON - ROSS AIR SYSTEMS REVERSE ROLL COATING STATION, WIDTH 60”, YEAR 1995 1. WALDRON - ROSS AIR SYSTEMS REVERSE ROLL COATING STATION 2. BRAND: WALDRON 3. MODEL: REVERSE ROLL COATER 4. YEAR: 1995 5. CONDITION: USED 6. WIDTH: 60.0 INCHES 7. 3-ROLL SYSTEM. QUANTITY: 1 Learn More