REFERENCE NUMBER: M-4485 (1010KQDTXX9) L
MARSHALL + WILLIAMS 96” PENTHOUSE TENTER
MARSHALL + WILLIAMS 96”
PENTHOUSE TENTER
CLIP CHAIN
MAYBE PIN CAPABILITY ALSO
WITH DIFFERENTIAL GEARBOX FOR WEFT STRAIGHTENING
ALSO SEPARATE WEFT STRAIGHTENER
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: M-4755 (111195DBJ10RL) L
BABCOCK STENTER YEAR 1991 WIDTH 2000mm – 8 CHAMBERS
(1) X BABCOCK STENTER – 5000 – 5800 TYPE
YEAR 1991
8 CHAMBERS (TOTAL LENGTH OF THE DRYING TUNNEL MT. 24
WORKING WIDTH 2000mm
BLOWERS MODEL JET-STAR WITH AIR CIRCUIT CIRCULATION TYPE ECON-AIR
POSSIBILITY TO ADJUST AIR FLOW INDEPENDENTLY UPPER AND BELOW
GAS HEATING SYSTEM
HORIZONTAL PIN CHAIN
CONICAL INPUT FIELD LENGTH MT. 3.5
TOTAL OVERFEEDING FOR NEEDLE CHAIN (+50%)
ENTRY WITH E+L CONICAL FIELD REGULATOR MODEL KR-40 WITH FR1501 PHOTOCELL FEELER GROUP
BIG ROLL ARM DEVICE FOR FABRIC OUTPUT ON A-FRAME TROLLEYS
SPEED ADJUSTABLE FROM 7.5 TO 150 MT/MIN
MACHINE IS PROVIDED OF:
(1) X BABCOCK IMPREGNATING/SQUEEZING PADDER – 5805 TYPE
2 CYLINDERS WITH ROLLER WIDTH 2000mm (WORKING WIDTH 1850mm)
STAINLESS STEEL IMPREGNATING THROUGH - 2 STAINLESS STEEL EXTERNAL TANKS WITH MIXER
D.C. DRIVE WITH SYNCHRONIZATION
(1) X MAHLO WEFT STRAIGHTENER RFMC TYPE – 4 OPTICAL HEADS
(1) X VACUUM EXTRACTOR WITH FILTER AND WATER RECOVERY – VACUUM PUMP WITH 30HP POWER – TO EXTRACT WATER FROM DELICATE FABRIC BYPASSING THE SQUEEZING PADDER
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: M-0630
SIMA PROMATECH EXTRUSION LINE
EXTRUSION LINE
MADE BY SIMA/PROMATECH AND ESSENTIALLY CONSISTING OF:
EXTRUDER 130mm DIAMETER
AUTOSCREEN
GEAR PUMP
DIE 1700mm
CHILL ROLL DIAMETER: 450 X 1800 AND AIR KNIFE
CUTTING UNIT
FIRST GODET, 3 ROLLS, DIAMETER 315 X 1650mm, PLUS 1 NIP ROLL
STRETCHING OVEN 5000 X 1600
SECOND GODET, 6 ROLLS, DIAMETER 315 X 1650mm, PLUS 2 NIP ROLLS
FIBRILLATOR UNIT
ANNEALING GODET, 9 ROLLS + NIP ROLL
CENTRAL CABINET
HOT OIL EQUIPMENT FOR ANNEALING GODET
WASTE SUCTION EQUIPMENT
AS NEW
QUANTITY AVAILABLE: 1 Learn More
MACHINE FEATURES:
- WITH NC SERVICE ROLLER, AUTOMATIC ADDING OIL DEVICE, BACKING YARN STORAGE DEVICE, DEVICE YARN NEEDLE, YARN COLLECTING PLAT AND AUTO STOP DEVICE.
-THE MAIN MOTOR IS CONTROLLED BY INVERTER AND PLC.
-THE CREEL IS CONTROLLED BY PNEUMATIC, AND ITS POSITION IS ACCURACY CONTROLLED BY PHOTOELECTRIC SENSOR AND THE PLC AUTOMATICALLY.
-THE MAIN BRAKE ADEPTS PNEUMATIC BUTTERFLY BRAKE. THE BREAKING TRAY WITH MIDDLE UNOCCUPIED HAS A NICE HEAT-DISSIPATED FUNCTION. ON THE OTHER HAND, THE USING OF BREAK PINCER WITH AUTO-COMPENSATION AND THE HOOFED PIECE MAKES THE BUTTERFLY BRAKE STABLE AND LAST A LONG LIFE.
-THE BRAKE OF POSITIVE ROLLER AND SPEED ROLLER CAN MAKE DIFFERENT BRAKE PRESSURES ACCORDING TO DIFFERENT SPEEDS (MORE THAN 200 M/MIN). THESE DIFFERENT PRESSURES, TOGETHER WITH THE MAIN BEAM BREAK, GUARANTEES THE YARN TENSION IN THE BREAKING TIME IS THE SAME AS THE TENSION UNDER THE CONSTANT SPEED.
-WITH TOUCH SCREEN. ALL THE ELECTRICAL TROUBLES AND WRONG OPERATION INFORMATION ARE DISPLAYED ON THE SCREEN. THE PNEUMATIC PART, AORTIC, IS MADE IN TAIWAN.
-THE POSITIVE ROLLER IS COVERED BY HIGH-HARDNESS COATING, SO THE SMOOTH SURFACE IMPROVES THE ABSORPTION TO THE YARN. THE AC HIGH-SPEED SERVO SYSTEM PROVIDES A POWER TO THE ABOVE ROLLER, MATCHING WITH THE PLC, BOTH OF WHICH SERVICE FOR THE MAIN WINDING SYSTEM, TO ENSURE THE CONSTANT TENSION OF YARN.
-WITH REMOTE DEBUGGING TO MONITOR THE CURRENT WORKING CONDITIONS.
CONSISTS OF:
(1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM
(2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER
(1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM
TECHNICAL DATA:
LINE SPEED 0 TO 1000M/MIN
MAX. TENSION OF LINE 1000N
BRAKE TORQUE 3200NM
UP AND DOWN OF BEAM PNEUMATIC CONTROL
TIGHT AND RELEASE OF BEAM PNEUMATIC CONTROL
DIAMETER OF SPEED ROLLER Ø120mm
POWER OF MAIN MOTOR 15KW
CONTROL TYPE OF MAIN MOTOR INVERTER CONTROL
MONITORING WAY IMMEDIATE MONITOR BY MICROCOMPUTER CONTROLLED TOUCH SCREEN
CONTROL TYPE OF POSITIVE YARN-SEND ROLLER AC HIGH-SPEED SERVO CONTROL SYSTEM OF MITSUBISHI
DIAMETER OF POSITIVE YARN-SEND ROLLER Ø100mm
PRESSURE OF PNEUMATIC SOURCE 6 BAR
MAIN PARTS：
MAIN MOTOR SIEMENS OF GERMANGY
HIGH-SPEED SERVO SYSTEM MITSUBISHI OF JAPAN
CONVERTER EMERSON OF USA
TEST COMPONENTS A AUTONICS OF SOUTH KOREA
TEST COMPONENTS B KOYO OF JAPAN
PNEUMATIC COMPONENTS AIRTAC OF TAIWAN
PLC OMRON OF JAPAN
TOUCH SCREEN MCGS OF BEIJING
OPERATING COMPONENTS SCHNEIDER OF FRANCE
TERMINAL COMPONENTS PHOENIXCONTACT OF GERMANGY
BEARING NSK OF JAPAN
(2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER
MAJOR PARTS:
1. MOTOR
2. ROLLER SPEED DETECTOR
3. CONTROL PANEL
4. REED
5. SIZING PARTS
6. LUBRICATING DEVICE
7. YARN STORAGE
8. TENSION ROLLER
9. STATIC ELIMINATOR
10. NEEDLES
11. YARN COLLECTING BOARD
DELIVERY TIME: 37-45 DAYS
Learn More
TT-8484 MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE, WIDTH 1600mm, 7 COLORS, YEAR 2011
1. MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE
2. MAX. PRINTING WIDTH: 1600mm
3. NO. OF COLORS: 7
4. 5 BARS WITH EACH 15 PRINTHEADS
5. 2 BARS WITH EACH 30 PRINTHEADS
QUANTITY: 1
Learn More
TT-8379 BRUECKNER STENTER MACHINE, WORKING WIDTH 3400mm, 6 CHAMBERS, YEAR 1998
1. 6 CHAMBERS GAS HEATED
2. WITH KUSTERS WASHING VAT AND COATING PADDER
3. BRAND: BRUECKNER
4. YEAR OF CONSTRUCTION: 1998
QUANTITY: 1
Learn More
TT-7858 SAURER EPOCA 2 OF 16.3 YARDS, YEAR 2003
1. SAURER EPOCA 2 OF 16.3 YARDS
2. THIS MACHINE CAN BE USED TO EMBROIDER FABRICS FOR LINGERIE, FURNISHING, READY-TO-WEAR AND GUIPURE.
3. IT CAN BE CONFIGURED ACCORDING TO THE NEEDLE RATIO PROGRAM FOR LARGE OR SMALL PATTERNS,
4. AND BASED ON THE COLOR OF THE COILS.
5. AUTOMATICALLY CUTS THREADS FORWARD AND BACKWARD WHEN CHANGING NEEDLE RATIO AND COMPLETING A PATTERN.
6. INCLUDES 552 ENGLISH EMBROIDERY PINS.
7. IT EMBROIDERS 14.50 METRES IN LENGTH AND 1600mm IN WIDTH THANKS TO ITS 1650mm FRAME.
QUANTITY: 1 Learn More
M-4485 MARSHALL + WILLIAMS 96” PENTHOUSE TENTERREFERENCE NUMBER: M-4485 (1010KQDTXX9) L MARSHALL + WILLIAMS 96” PENTHOUSE TENTER MARSHALL + WILLIAMS 96” PENTHOUSE TENTER CLIP CHAIN MAYBE PIN CAPABILITY ALSO WITH DIFFERENTIAL GEARBOX FOR WEFT STRAIGHTENING ALSO SEPARATE WEFT STRAIGHTENER QUANTITY AVAILABLE: 1 Learn More
M-0630 SIMA PROMATECH EXTRUSION LINEREFERENCE NUMBER: M-0630 SIMA PROMATECH EXTRUSION LINE EXTRUSION LINE MADE BY SIMA/PROMATECH AND ESSENTIALLY CONSISTING OF: EXTRUDER 130mm DIAMETER AUTOSCREEN GEAR PUMP DIE 1700mm CHILL ROLL DIAMETER: 450 X 1800 AND AIR KNIFE CUTTING UNIT FIRST GODET, 3 ROLLS, DIAMETER 315 X 1650mm, PLUS 1 NIP ROLL STRETCHING OVEN 5000 X 1600 SECOND GODET, 6 ROLLS, DIAMETER 315 X 1650mm, PLUS 2 NIP ROLLS FIBRILLATOR UNIT ANNEALING GODET, 9 ROLLS + NIP ROLL CENTRAL CABINET HOT OIL EQUIPMENT FOR ANNEALING GODET WASTE SUCTION EQUIPMENT AS NEW QUANTITY AVAILABLE: 1 Learn More
AUTOMATIC HIGH-PRECISION COPY WARPING MACHINE FOR 30”×42” AND 21”X42” BEAM AND 1400-POSITION CREELMACHINE FEATURES: - WITH NC SERVICE ROLLER, AUTOMATIC ADDING OIL DEVICE, BACKING YARN STORAGE DEVICE, DEVICE YARN NEEDLE, YARN COLLECTING PLAT AND AUTO STOP DEVICE. -THE MAIN MOTOR IS CONTROLLED BY INVERTER AND PLC. -THE CREEL IS CONTROLLED BY PNEUMATIC, AND ITS POSITION IS ACCURACY CONTROLLED BY PHOTOELECTRIC SENSOR AND THE PLC AUTOMATICALLY. -THE MAIN BRAKE ADEPTS PNEUMATIC BUTTERFLY BRAKE. THE BREAKING TRAY WITH MIDDLE UNOCCUPIED HAS A NICE HEAT-DISSIPATED FUNCTION. ON THE OTHER HAND, THE USING OF BREAK PINCER WITH AUTO-COMPENSATION AND THE HOOFED PIECE MAKES THE BUTTERFLY BRAKE STABLE AND LAST A LONG LIFE. -THE BRAKE OF POSITIVE ROLLER AND SPEED ROLLER CAN MAKE DIFFERENT BRAKE PRESSURES ACCORDING TO DIFFERENT SPEEDS (MORE THAN 200 M/MIN). THESE DIFFERENT PRESSURES, TOGETHER WITH THE MAIN BEAM BREAK, GUARANTEES THE YARN TENSION IN THE BREAKING TIME IS THE SAME AS THE TENSION UNDER THE CONSTANT SPEED. -WITH TOUCH SCREEN. ALL THE ELECTRICAL TROUBLES AND WRONG OPERATION INFORMATION ARE DISPLAYED ON THE SCREEN. THE PNEUMATIC PART, AORTIC, IS MADE IN TAIWAN. -THE POSITIVE ROLLER IS COVERED BY HIGH-HARDNESS COATING, SO THE SMOOTH SURFACE IMPROVES THE ABSORPTION TO THE YARN. THE AC HIGH-SPEED SERVO SYSTEM PROVIDES A POWER TO THE ABOVE ROLLER, MATCHING WITH THE PLC, BOTH OF WHICH SERVICE FOR THE MAIN WINDING SYSTEM, TO ENSURE THE CONSTANT TENSION OF YARN. -WITH REMOTE DEBUGGING TO MONITOR THE CURRENT WORKING CONDITIONS. CONSISTS OF: (1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM (2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER (1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM TECHNICAL DATA: LINE SPEED 0 TO 1000M/MIN MAX. TENSION OF LINE 1000N BRAKE TORQUE 3200NM UP AND DOWN OF BEAM PNEUMATIC CONTROL TIGHT AND RELEASE OF BEAM PNEUMATIC CONTROL DIAMETER OF SPEED ROLLER Ø120mm POWER OF MAIN MOTOR 15KW CONTROL TYPE OF MAIN MOTOR INVERTER CONTROL MONITORING WAY IMMEDIATE MONITOR BY MICROCOMPUTER CONTROLLED TOUCH SCREEN CONTROL TYPE OF POSITIVE YARN-SEND ROLLER AC HIGH-SPEED SERVO CONTROL SYSTEM OF MITSUBISHI DIAMETER OF POSITIVE YARN-SEND ROLLER Ø100mm PRESSURE OF PNEUMATIC SOURCE 6 BAR MAIN PARTS： MAIN MOTOR SIEMENS OF GERMANGY HIGH-SPEED SERVO SYSTEM MITSUBISHI OF JAPAN CONVERTER EMERSON OF USA TEST COMPONENTS A AUTONICS OF SOUTH KOREA TEST COMPONENTS B KOYO OF JAPAN PNEUMATIC COMPONENTS AIRTAC OF TAIWAN PLC OMRON OF JAPAN TOUCH SCREEN MCGS OF BEIJING OPERATING COMPONENTS SCHNEIDER OF FRANCE TERMINAL COMPONENTS PHOENIXCONTACT OF GERMANGY BEARING NSK OF JAPAN (2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER MAJOR PARTS: 1. MOTOR 2. ROLLER SPEED DETECTOR 3. CONTROL PANEL 4. REED 5. SIZING PARTS 6. LUBRICATING DEVICE 7. YARN STORAGE 8. TENSION ROLLER 9. STATIC ELIMINATOR 10. NEEDLES 11. YARN COLLECTING BOARD DELIVERY TIME: 37-45 DAYS Learn More
TT-8545 CATERPILLAR 772G ROCK TRUCK, YEAR 2017, 9930 HOURSTT-8545 CATERPILLAR 772G ROCK TRUCK, YEAR 2017, 9930 HOURS 1. MACHINE HOURS: 9930 - LOAD FACTOR: 22% - NEUTRAL HOURS: 2694 2. CATERPILLAR 772 ROCK TRUCK 3. CATERPILLAR C18 ACERT ENGINE QUANTITY: 1 Learn More
TT-8493 GE STEAM TURBINE BLADES AND PARTS, 1000 KW TO 1250 KWTT-8493 GE STEAM TURBINE BLADES AND PARTS, 1000 KW TO 1250 KW Learn More
TT-8484 MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE, WIDTH 1600mm, 7 COLORS, YEAR 2011TT-8484 MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE, WIDTH 1600mm, 7 COLORS, YEAR 2011 1. MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE 2. MAX. PRINTING WIDTH: 1600mm 3. NO. OF COLORS: 7 4. 5 BARS WITH EACH 15 PRINTHEADS 5. 2 BARS WITH EACH 30 PRINTHEADS QUANTITY: 1 Learn More
TT-8379 BRUECKNER STENTER MACHINE, WORKING WIDTH 3400mm, 6 CHAMBERS, YEAR 1998TT-8379 BRUECKNER STENTER MACHINE, WORKING WIDTH 3400mm, 6 CHAMBERS, YEAR 1998 1. 6 CHAMBERS GAS HEATED 2. WITH KUSTERS WASHING VAT AND COATING PADDER 3. BRAND: BRUECKNER 4. YEAR OF CONSTRUCTION: 1998 QUANTITY: 1 Learn More
TT-8043 CERUTTI-28/128 R ROTOGRAVURE PRINTING PRESS, 9 COLORS, 1200mm, YEAR 1982 TO 2012 RETROFITTT-8043 CERUTTI-28/128 R ROTOGRAVURE PRINTING PRESS, 9 COLORS, 1200mm, YEAR 1982 TO 2012 RETROFIT 1. CERUTTI-28/128 R ROTOGRAVURE PRINTING PRESS 2. 9 COLORS 3. YEAR OF CONSTRUCTION: 1982 -1996 + 2012 RETROFIT 4. OFFER EX WORKS, EXCLUDING DISMANTLING LOADING: 5. AGAINST OFFER /GEGEN ANGEBOT 6. N°1 PB 32 - N°1 TR - N°6 ES 288 - N°2 EXTENDED ES 28/8 - N°1 EXTENDED ES 128 L2 - N°1 TR - N*1 RB 28 Learn More
TT-7858 SAURER EPOCA 2 OF 16.3 YARDS, YEAR 2003TT-7858 SAURER EPOCA 2 OF 16.3 YARDS, YEAR 2003 1. SAURER EPOCA 2 OF 16.3 YARDS 2. THIS MACHINE CAN BE USED TO EMBROIDER FABRICS FOR LINGERIE, FURNISHING, READY-TO-WEAR AND GUIPURE. 3. IT CAN BE CONFIGURED ACCORDING TO THE NEEDLE RATIO PROGRAM FOR LARGE OR SMALL PATTERNS, 4. AND BASED ON THE COLOR OF THE COILS. 5. AUTOMATICALLY CUTS THREADS FORWARD AND BACKWARD WHEN CHANGING NEEDLE RATIO AND COMPLETING A PATTERN. 6. INCLUDES 552 ENGLISH EMBROIDERY PINS. 7. IT EMBROIDERS 14.50 METRES IN LENGTH AND 1600mm IN WIDTH THANKS TO ITS 1650mm FRAME. QUANTITY: 1 Learn More