Search results for: 'PRODUCT+MODE'

TT-3762 HFO WARTSILA W18V32 POWER PLANT, 7MW, 60Hz, YEAR 2001 HFO WARTSILA W18V32 35MW 60Hz POWER PLANT THIS POWER PLANT HAD OPERATED 5 DIESEL ENGINE GENERATORS FOR ELECTRICITY PRODUCTION USING DIESEL OIL AS FUEL ENGINE MODEL IS WARTSILA W18V32. GENERATOR MODEL IS ABB AND ITS OUTPUT IS 7,050KWE AT 60Hz. THEY WERE PRODUCED IN 2001 AND HAD BEEN SUCCESSFULLY OPERATED FOR ABOUT 35,000 RUNNING HOURS. THE POWER PLANT WAS DISMANTLED IN 2018 AND HAS BEEN PRESERVED IN A LOCAL SITE. THEREFORE, THEY ARE READY FOR IMMEDIATE INSPECTION AND DELIVERY AT THE CUSTOMER’S DISCRETION. ENGINE MODEL: W18V32 BRAND: WARTSILA CONTINUOUS OUTPUT: 7,050 KWE X 720 RPM FREQUENCY & VOLTAGE: 60 Hz & 13,800 VOLTS YEAR OF PRODUCTION: 2001 FUEL OIL: DIESEL OIL PLANT AUXILIARY EQUIPMENT: 1 SET RUNNING HOURS: ABOUT 35,000 HOURS QUANTITY: 5 Learn More

TT-7588 TETRA PAK® TETRA ALCIP 1, YEAR 2010 1. MACHINE TYPE: VARIOUS EQUIPMENT 2. BRAND: TETRA PAK® 3. MODEL: TETRA ALCIP 1 4. YEAR OF CONSTRUCTION: 2010 5. UPDATE: 29.04.2025 6. CONDITION: USED QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5128 (121285KMN11UF) L FULL AUTOMATIC TRANSFER LINE FOR INNER SPRING UNITS FULL AUTOMATIC TRANSFER LINE FOR INNER SPRING UNITS MODEL: FC-90 PRODUCTION: 12 SPRING UNITS PER HOUR (SPRING UNIT SIZE 1.5 M X 2 M) SPRING TYPE: BONNELL SPRING DIAMETER: 67 TO 90mm STEEL WIRE DIAMETER: 1.9 TO 2.5mm SPRING HEIGHT (CAN BE CUSTOMIZED): 100 TO 180mm (<80mm NEEDS TO BE CUSTOMIZED) SPRING COILS: 4 TO 7 COILS HELICAL WIRE DIAMETER: 1.3 TO 1.4mm MAXIMUM SPRING UNIT WIDTH: 2050mm QUANTITY AVAILABLE: 1 Learn More

YY-3556 4 X 60 MW GE LM6000 PD 15PPM SPRINT GAS TURBINE POWER PLANT HISTORY: THE POWER PLANT CONSISTS OF X 50 MW GE LM6000 PD 15PPM SPRINT GAS TURBINE, ALL OF YEAR: 2011, 7000 HRS SINCE NEW EACH, 3000 RPM, 50 Hz, X 13 MW SIEMENS SST 300 STEAM TURBINE WITH 5000 HOURS EACH. PLANT WAS COMMISSIONED AND PUT INTO OPERATION IN 2012. QUNATITY: 1 Learn More

YY-2441 AUTO VERTICAL STITCH SEWING MACHINE, MATTRESS BORDER WIDTH 560mm (22 INCHES) APPLICATION: THIS MACHINE IS USE FOR VERTICAL STITCH SEWING MATTRESS DECORATIVE BORDER, THE MACHINE IS EQUIPPED HIGH QUALITY SEWING HEAD, THE SPEED OF SEWING CAN REACH 3.5M/MINUTES, SEWING THICKNESS CAN REACH 15MM. ACCORDING TO USER’S REQUESTS TO CHOOSE DIFFERENT WIDTH MATTRESS BORDER FOR ARISE QUALITY LEVEL OF MATTRESS. THE ADVANCED PLC CONTROL SYSTEM TO ENSURE ACCURATE SEWING AND NICE RESULT. IT EQUIPPED SPECIAL DESIGNED MATERIAL FEEDING AND WINDER SYSTEM WITH SMART SENSOR. IT IS SUCCESSFULLY ACCOMPLISH COMPLETE AUTOMATION PRODUCTION. THIS IS THE PERFECT AND PROFESSIONAL SEWING EQUIPMENT FOR THE PRODUCTION OF LUXURY MATTRESSES. Learn More

TT-1882 HFO MITSUBISHI 18KU30A POWER PLANT, 45MW 50Hz, 5.6MW, YEAR 1998 MAIN SPECIFICATIONS: ENGINE MODEL: 18KU30A BRAND: MITSUBISHI CONTINUOUS OUTPUT: 5,600KWE X 750 RPM FREQUENCY & VOLTAGE: 50HZ & 11,000V YEAR OF PRODUCTION: 1998 FUEL OIL: HFO / DO PLANT AUXILIARY EQUIPMENT: 1 SET RUNNING HOURS: ABT. 21,000 HOURS QUANTITY: 8 Learn More

TT-1904 HFO WARTSILA W18V32 POWER PLANT, 7MW, 60Hz, YEAR 2001 MAIN SPECIFICATIONS: ENGINE MODEL: W18V32 MAKER: WARTSILA CONTINUOUS OUTPUT: 7,050KWE X 720 RPM FREQUENCY & VOLTAGE: 60Hz & 13,800V YEAR OF PRODUCTION: 2001 FUEL OIL: DIESEL OIL PLANT AUXILIARY EQUIPMENT: 1 SET RUNNING HOURS: ABOUT 35,000 HOURS STATUS: DISMANTLED IN 2018 AND PRESERVED INSPECTION: IMMEDIATELY DELIVERY: IMMEDIATELY AFTER SIGNING CONTRACT QUANTITY: 5 Learn More

REFERENCE NUMBER: A-2511 SUGAR AND ALCOHOL PLANT CANE UNLOAD SECTOR THE CANE UNLOADING SECTOR IS EQUIPPED WITH THE EQUIPMENT LISTED BELOW IN THE CONDITION TO CARRY OUT A GRINDING OF 8400 TCD WHICH CORRESPONDS TO A HARVEST OF 1800000 TONNES OF CANE / YEAR • 01 HILO UNLOADER OF STORAGE • 01 HILO UNLOADER OF MILLING • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 25 INCHES • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 45 INCHES • 02 CRANES WITH CAPACITY OF 20 TONNES • 01 TRANSPORTER TYPE CUSCH - CUSH OF 40 INCHES • 02 MOTOR PUMP WITH CAPACITY OF 1000 M³/H TO 50 MCW FOR CANE WASHING • 01 CONTAMINATED FLUID TREATMENT SYSTEM • 01 METAL STRUCTURE BUILDING MEASURING 20000 X 100000 mm CANE PREPARATION SECTOR THE SUGARCANE PREPARATION SECTOR IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW TO PERFORM A CRUSHING OF 7200 TCD WHICH CORRESPONDS TO A CROP OF 1600000 TONS OF SUGARCANE / YEAR • 01 METALLIC CONVEYOR OF 60 INCHES • 01 LEVELING OF CANE OF 60 INCHES • 01 CANE KNIVES SET TYPE COP-8 OF 60 INCHES • 01 CAN SHREDDER SET TYPE COP-5 OF 60 INCHES • 01 FEEDER ROLL 60 IINCHES • 01 RUBBER TRANSPORTER FOR CANE SHREDDED OF 60 INCHES • 01 TGM TURBINE FOR KNIVES SET • 01 TGM TURBINE FOR SHREDDER SET • 01 HIGH AND LOWER SPEED REDUCER OF KNIVES SET • 01 HIGH AND LOWER SPEED REDUCER OF SHREDDER SET • 01 REDUCER FOR METALLIC CONVEYOR • 01 REDUCER FOR FEEDER ROLL • 01 REDUCER OF SHREDDED CANE TRANSPORTER TYPE BELT MILLING CANE SECTOR THE CANE MILLING SECTOR OF THE PLANT IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM TO CARRY OUT A GRINDING OF 7200 TCD CORRESPONDING TO A 222 - DAY HARVEST TO GRIND 1600000 TONS. CANE / YEAR • 04 MILLS OF 32 X 60 INCHES • 03 INTERMIDIATE TRANSPORTER OF 60 INCHES • 01 ROTARY SIEVE FOR MILLING 300 TCD • 01 TGM TURBINE OF DRIVING THE 1º / 2º MILLS • 01 TGM TURBINE OF DRIVING OF 3º / 4º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 1º / 2º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 3º / 4º MILLS • 03 REDUCER INTERMEDIATE TRANSPORTER OF 60 INCHES • 02 PUMPS OF 1ST JUICE • 02 PUMPS OF JUICE IMBIBITION OF 3RD FOR 2ND MILL • 02 PUMPS OF JUICE IMBIBITION OF 4TH FOR 3RD MILLS • 02 PUMPS OF MIXED JUICE OF MILL FOR JUICE TREATMENT STEAM GENERATION SECTOR THE STEAM GENERATION SECTOR OF THE PLANT IS PREPARED TODAY TO PERFORM A 7200 TCD GRINDING CORRESPONDING TO A 220 - DAY HARVEST TO GRIND 1600000 TON. CANE / YEAR WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW • 01 BOILER N ° 01, MODEL: TS-3-150 MODIFIED FOR CBS-120-21 KG / CM² TODAY GENERATES AN AVERAGE OF 11000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 BOILER N ° 02, MODEL: TS-3-150-21 KG / CM² TODAY GENERATES AN AVERAGE OF 55000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 DEAERATOR WITH A CAPACITY OF 70 M³ • 01 78 INCHES BAGASSE METALLIC TRANSPORTER OF 32000 mm LENGTH • 01 48 INCHES BAGASSE TRANSPORTER FROM MILL TO BOILER • 01 48 INCHES BAGASSE RETURN TRANSPORTER FOR BOILER • 01 REDUCER OF BAGASSE TRANSPORTER FROM MILL TOBOILER • 01 REDUCER OF BAGASSE RETURN TRANSPORTER TOBOILER • 02 MOTO - PUMPS OF WATER FEEDING OF DEAERATOR • 02 MOTO - PUMPS OF WATER TREATMENT OF BOILER • 01 MOTO - PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 01 TURBO-PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 02 MOTO-PUMPS WITH CAPACITY OF 220 M³/H TO 50 MCW FOR WET SCRUBBER OF BOILER NO. 2 • 03 MOTO - PUMPS OF 40 M³/H TO 300 MCW • 01 METALLIC RESERVOIR WITH 200 M³ OF CONDENSED WATER CAPACITY POWER GENERATION SECTOR THE POWER GENERATION SECTOR IS EQUIPPED WITH THE FOLLOWING MODERN AND AUTOMATED EQUIPMENT LISTED BELOW TO MEET A GRINDING OF 8400 TCD • 01 THREE - PHASE GENERATOR OF 6250 KVA – 13800 VOLTS – 60Hz • 01 TGM STEAM TURBINE MODEL TM - 5000 • 01 REDUCER RENK - ZANINI WITH CAPACITY OF 5000 KW • SEVERAL ELECTRICALS PANELS OF THE GENERATOR • 01 TURBO GENERATOR HOUSE BUILDING • 02 WATER COOLING TOWERS FOR THE TURBO-GENERATOR • 02 MOTO - PUMPS OF 100 M³/H TO 30 MCW SUGAR FACTORY THE SUGAR FACTORY WAS SET UP BETWEEN 2007 / 2008 AND COMPLETELY AUTOMATED WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM, PRODUCING AN AVERAGE OF 500000 KG OF VHP SUGAR PER DAY, A VALUE CORRESPONDING TO A MILLING OF 5000 TCD. THE TRANSPORT OF THIS SUGAR MANUFACTURED AT THE DECASA PLANT IS BEING TRANSPORTED BY MEANS OF A BUCKET VEHICLE WITH A DESTINATION INFORMED BY THE CUSTOMER. FOR THIS PLANT TO PRODUCE CRYSTAL SUGAR IC - 150, WE WILL NEED TO ACQUIRE AND ASSEMBLE THE FOLLOWING EQUIPMENT • SULFITATION EQUIPAMENT • BAGGING EQUIPMENT OF 50 KG BAGS • BUILD OR RENT AN INFLATABLE WAREHOUSE TO STORE SUGAR WITH THE INSTALLATION OF THIS EQUIPMENT, THE SUGAR FACTORY IS PREPARED TO RECEIVE A MILLING OF 5000 TCD CORRESPONDING TO A DAILY PRODUCTION OF 500000 KG OF CRYSTAL SUGAR IC - 150 PER DAY ALCOHOL DISTILLERY THE DISTILLERY WAS INSTALLED IN 1982 WITH A CAPACITY OF 300000 LITERS OF HYDRATED ALCOHOL PER DAY. WHEN THE FORMER OWNER'S UNIT WAS SOLD TO THE OLIVAL TENÓRIO GROUP IN 2003, THE NEW ENTREPRENEUR INVESTED IN THE MANUFACTURE OF ALCOHOL IN 2006 BY INSTALLING ANOTHER COLUMN OF DISTILLATION WITH A CAPACITY OF 300,000 LITERS AND AUTOMATED 100% INCREASING ITS PRODUCTION CAPACITY TO 600,000 LITERS OF HYDRATED ALCOHOL PER DAY • 02 TYPE “A” DISTILLATION COLUMNS WITH CAPACITY TO PRODUCE 300 M³ OF ALCOHOL / DAY • 02 TYPE “B” RECTIFICATION COLUMNS WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “A” DISTILLATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “B” RECTIFICATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 09 TUBULAR HEAT EXCHANGERS TYPE “K” • 02 TUBULAR HEAT EXCHANGERS TYPE “J” • 02 TUBULAR HEAT EXCHANGERS TYPE “E” • 02 TUBULAR HEAT EXCHANGERS TYPE “E1” • 02 TUBULAR HEAT EXCHANGERS TYPE “E2” • 02 TUBULAR HEAT EXCHANGERS TYPE “R” • 02 TUBULAR HEAT EXCHANGERS TYPE “R1” • 11 NEW FERMENTATION VATS WITH A CAPACITY OF 300 M³ • 03 PLATE HEAT EXCHANGERS FOR THE WORT • 05 PLATE TYPE HEAT EXCHANGERS FOR VATS • 01 VAT FOR WINE • 01 CO₂ RECOVERY COLUMN • 02 PUMPS WITH A CAPACITY OF 600 M³ / H - 50 MCA FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 01 PUMP WITH A CAPACITY OF 800 M³ / H FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 02 CENTRÍFUGES HAD - 90 • 04 CENTRÍFUGES HAD - 60 WITH THE INSTALLATION OF THIS EQUIPMENT, THE ALCOHOL DISTILLERY IS PREPARED TO PRODUCE 600000 LITERS OF ALCOHOL PER DAY, RECEIVING A MILLING OF 6500 TCD CORRESPONDING TO 2500000 TONS OF CANE / YEAR Learn More

TT-5081 PRODUCTION LINE FOR NEEDLE-PUNCHED NONWOVEN FABRICS, 50 Hz, YEAR 1992 TO 2024 THE FOLLOWING WEIGHTS OF NONWOVEN FABRIC CAN BE MADE ON THE PRODUCTION LINE: 200 TO 1000 G/M² LINE EFFICIENCY: 300 KG/H FINAL WORKING WIDTH OF THE NONWOVEN FABRIC: 2500mm POWER SUPPLY: 400 V, 50 Hz, INSTALLED POWER: 62 KW THE LINE IS EQUIPPED WITH MODERN CONTROL IN CONTROL CABINETS NECESSARY AREA FOR THE ROPE: LENGTH: 17000mm, WIDTH: 10000mm, Learn More

TT-8349 THEGARTEN PACTEC EW6/F1 CUT & STICK PACK, UP TO 650 INDIVIDUAL PRODUCTS PER MINUTE 1. BRAND: THEGARTEN PACTEC 2. MODEL: EW6/F1 3. CONDITION: REFURBISHED QUANTITY: 1 Learn More