Search results for: 'inch to m'

FOR MATERIAL 2200 X 2200 (86.6 X 86.6 INCHES) CUTTING HEIGHT: 1200mm (47.2 INCHES) THROAT DEPTH 1720mm (67.7 INCHES) MINIMUM CUTTING THICKNESS 3mm TOTAL KW: 2 WEIGHT: 1500KG WITH BLADE GUIDE BLADE WIDTH 25mm BLADE THICKNESS 0.45mm FENCE HEIGHT: 600mm MACHINE EXTERNAL DIMENSIONS: 4550 X 4800 X 2550 (15 FEET X 16 FEET X 100 INCHES TALL) MOTORS: 220V/60HZ Learn More

TT-2294 SPENCER HARRIS 7000 TRAILER MOUNTED DRILLING RIG 700HP 700HP SPENCER HARRIS 7000 TRAILER MOUNTED DRILLING RIG USED DRILLING RIG 700HP CONDITION: GOOD QUANTITY: 1 Learn More

(1) EMCO QUILTER 2 BARS WIDTH: 88” INCHES BOBBIN # 10 WITH 7 CIRCULAR BLADES IN THE BACK FOR BORDER CUTTING COMPUTER DRIVEN CLOTH TRAY CAT WALK OVERHEAD THREAD RACK PLATE INFORMATION (FOR THE QUILTER) MODEL: 88•1•3•4 PLATE INFORMATION (FOR THE CONTROL PANEL) MODEL: 88•1•3•4 THE COMPUTER INCLUDES 2 DRIVES DRIVES INFORMATION FOR COMPUTER A B AMP. MODEL: MPA-25 MPA-10 SERIAL NUMBERS: 36418 36324 D/C: 130120 130104 PHASE: SINGLE/3 SINGLE INPUT VOLTAGE: 80-260VAC 80-260VAC INPUT FREQUENCY: 45-65Hz 45-65Hz INPUT CURRENT: 30/18A 12A OUTPUT CURRENT: 25/50A 10/20A PWM FREQUENCY: 15KHZ 18KHZ TERMINAL TORQUE: 7 INCHES 7 INCHES AMP. TEMP RANGE: 0-45C° 0-45C° Learn More

P-3516 BALEMASTER AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR YEAR 1989

BALEMASTER
AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR
YEAR: 1989
6’ WIDE x 32’ LONG INCLINED LOADING BELT CONVEYOR:
ORIGINAL INSTALLATION:
THE ENTRANCE WAS BELOW FLOOR LEVEL ALLOWING FLOOR LEVEL, PUSH-TYPE LOADING. PRODUCT THEN FALLS ONTO A SHORT SECTION OF SHREDDER FEEDING CONVEYOR
EQUIPPED WITH:
24 INCHES HIGH SIDE GUIDES
AUTO BELT TRACKING

BALEMASTER
SERIES 1350J-62 PAPER SHREDDER
62 INCHES WIDE
SPECIFICATIONS:
MOUNTED TO TOP OF BALER FEED CHUTE
WAS USED FOR MAGAZINE EDGE TRIM & NEWSPAPER, BUT CAN BE USED FOR OTHER MATERIALS

BALEMASTER
MODEL: 4025C-8
AUTO TIE BALER
YEAR: 1989
SPECIFICATIONS:
MATERIALS: NEWSPRINT, MAGAZINES, CORRUGATED CHIPBOARD, FIBERBOARD, BOXBOARD
BALESIZE: 28 INCHES W x 36-1/2 INCHES H x UP TO 84 INCHES LONG
BALE WEIGHT: 1,440 POUNDS @ 72 INCHES LONG
OPENING SIZE: 17 INCHES x 32 INCHES
BALER HEIGHT: 48 INCHES
BALER HEIGHT WITH CHUTE: 72 INCHES
CYLINDER DIAMETER: 8 INCHES
THRUST: 150,900 POUNDS @ 3,000 PSI
NUMBER OF WIRE REELS: 5 @ 100 POUNDS EACH
(10) AUTO TWISTER HOOKS, (5) CUTTERS PER SIDE

EQUIPPED WITH:
AIR COOLED HYDRAULIC OIL COOLER FOR CONTINUOUS OPERATION WITH ITS OWN MOTOR & PUMP WATER SPRAY SYSTEM
(2) 5’ LONG BALE TAKE-AWAY TABLES

MOTOR DATA: 25 HP BALER, 230/460/60/3

NOTE: INSTALLATION ASSISTANCE AVAILABLE

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4211 (1010POLAXX9) K EDGE SAW VERTICAL SLITTER MODEL E-3 ( 1 ) EDGE SAW VERTICAL SLITTER ( MAYBE FOR SALE IN THE FUTURE ) MODEL: E-3 INNER TABLE: WIDTH: 137" INCHES LENGTH ( DEPTH ): 65 3/4" INCHES OUTER TABLE: WIDTH: 137" INCHES LENGTH: 6'FT. FENCE: HEIGHT: 24 1/2" INCHES LENGTH: 140 1/2" INCHES DISTANCE FROM BLADE TO FENCE: 66" IN DISTANCE FROM TABLE TO TOP ( INSIDE) NECK: 51 3/4" INCHES RAIL LENGTH: 241 1/2" INCHES Learn More

TT-2827 FECKEN-KIRFEL S24 HORIZONTAL FOAM SPLITTING MACHINE, WORKING WIDTH 2600mm, YEAR 1988 RENOVATED 2015 FECKEN-KIRFEL S24 HORIZONTAL FOAM SPLITTING MACHINE YEAR 1988 MACHINE TYPE: HORIZONTAL FOAM SPLITTING MACHINE BRAND: FECKEN-KIRFEL MODEL: S24 400V 50Hz CONDITION: GOOD (USED) CUTTING AND SPLITTING SHEETS OF VARIOUS THICKNESSES IN LARGE QUANTITIES THE SPECIALLY REINFORCED DESIGN OF THE CUTTING UNIT ALLOWS THE OPTIMAL PROCESSING OF MEDIUM AND HIGH VOLUME WEIGHTS. MACHINE IS FROM 1988 BUT STEERING IN 2015 RENOVATED. NEW SIMATIC CONTROL ENABLES EASY WORK AND PROGRAMMING FOR THE OPERATOR. QUANTITY: 1 Learn More

REFERENCE NUMBER: L-4862

HRB HORIZONTAL BALER

100 HP, 120 AMPS

WIDTH: 73 ½” INCHES

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4086

EDGE SAW E-3 VERTICAL SLITTER

 

EDGE SAW VERTICAL SLITTER

MODEL: E-3

HEIGHT FROM TABLE TO TOP NECK (BLADE HEIGHT): APPROXIMATELY 53” INCHES

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 72” INCHES)

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 49” INCHES)

RAILS APPROXIMATELY 20 FEET LONG

THE MACHINE IS DISMANTLED

Distance from blade to neck is 72 inches

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-6095
GAUZE MACHINE PRODUCTION LINE

GAUZE SLITTING MACHINE

GAUZE FOLDING MACHINE

GAUZE PACKING MACHINE

ETHYLENE OXIDE STERILIZER

Learn More

TT-1594 DISTILLATION SYSTEMS & COLUMNS, CAPACITY 950mm TO 1000mm DIAMETER ITEM 001 PACKED DISTILLATION COLUMN SYSTEM ITEM 002 PACKED DISTILLATION COLUMN SYSTEM Learn More