Search results for: 'continu'[0]'

TT-7165 COMPLETE TEXTILE MILL EQUIPMENT, YEAR 1986 TO 2023 COMPLETE DENIM TEXTILE MILL EQUIPMENT: WEAVING, SIZING, TWISTING, WINDING, AND FINISHING MACHINERY - INCLUDING CONTINUOUS WASHING, MERCERIZING, AND SANFORIZING. Learn More

TT-6598 MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET, 2.5 MW, 50 Hz, 1500 RPM, YEAR 2024 1. MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET 2. 1 UNIT 400 V 3. 2 UNITS 6.3 KV Learn More

TT-6597 MTU OPEN TYPE NATURAL GAS GENERATORS, 1.5 MW, 50Hz EXCELLENT FULL DESCRIPTION OF A GENERATOR QUANTITY: 10 Learn More

TT-3122 WAUKESHA GAS GENERATOR SETS, 3360.8 KW (4201 KVA), 50 Hz ITEM 001 WAUKESHA GAS GENERATOR 3360.8 KW (4201 KVA), 11000 VOLT, 220.5 AMP, 3 PHASE, 50 Hz GAS ENGINE DRIVEN ELECTRICAL GENERATOR ENGINE MANUFACTURED BY WAUKESHA (DRESSER) MODEL #16VAT27GL ITEM 002 WAUKESHA GAS GENERATOR 3360.8 KW (4201 KVA), 11000 VOLT, 220.5 AMP, 3 PHASE, 50 Hz GAS ENGINE DRIVEN ELECTRICAL GENERATOR ENGINE MANUFACTURED BY WAUKESHA (DRESSER) MODEL #16VAT27GL Learn More

YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H OVERCONSUMPTION: 500 KW OUTPUT: 1000 KGS PER HOUR INTENDED FOR THE FOLLOWING WASTE: OUTPUT; BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H; CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H; PERFORMANCE IS PROVIDED FOR REFERENCE ONLY. THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION. AVERAGE POWER CONSUMPTION: 500 KW; AVERAGE COOLING WATER DEMAND: 668 L/MIN; AVERAGE FRESH WATER CONSUMPTION: 34 L/H; MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN. THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING. Learn More

YY-1136 ULTRAVIOLET STERILIZER MAINTENANCE OF UV STERILIZER: 1 CHECK REGULARLY TO ENSURE THE NORMAL OPERATION OF THE UV LAMP. 2. AFTER 9000 HOURS OR ONE YEAR OF CONTINUOUS USE, THE ULTRAVIOLET LAMP SHOULD BE REPLACED. WHEN REPLACING A NEW LAMP, FIRST UNPLUG THE POWER SOCKET OF THE LAMP AND TAKE OUT THE ULTRAVIOLET LAMP. PAY ATTENTION NOT TO TOUCH THE QUARTZ GLASS OF THE NEW LAMP WITH YOUR FINGERS, BECAUSE THE STAIN WILL AFFECT THE INTENSITY OF THE LIGHT, AND CAREFULLY PUT THE LAMP INTO THE CHAMBER OF THE STERILIZER. Learn More

R-1695 TRUTZSCHLER DK903 IDF CARDING, YEAR 2002

ITEM 001
TRUTZSCHLER DK903 IDF CARDING
MAKE: TRUTZSCHLER
MODEL: DK903 IDF
YEAR: 2002
INTEGRATED DRAW FRAMES: AVAILABLE
CCD: AVAILABLE
CFD: AVAILABLE
CHUTE FEED TYPE: DFK
CAN HEIGHT: 45”
WASTE COLLECTION: CONTINUOUS
EXHAUST / WASTE SUCTION: UPWARDS
NO OF LICKER IN: 3
FLAT TYPE: ALUMINUM
ST FLAT FRONT: 2
ST FLAT BACK: 3
MATERIAL PROCESS: COTTON

QUANTITY: 12

ITEM 002
TRUTZSCHLER DK903 IDF CARDING
MAKE: TRUTZSCHLER
MODEL: DK903 IDF
YEAR: 2002
INTEGRATED DRAWFRAME: AVAILABLE
CCD: AVAILABLE
CFD: AVAILABLE
CHUTE FEED TYPE: DFK
CAN HEIGHT: 45”
WASTE COLLECTION: CONTINUOUS
EXHAUST / WASTE SUCTION: UPWARDS
LICKER IN: 3
FLAT TYPE: ALUMINUM
ST FLAT FRONT: 3
ST FLAT BACK: 5
MATERIAL PROCESS: SYNTHETIC

QUANTITY: 4

Learn More

REFERENCE NUMBER: C-4085

GREENVILLE CONTINUOS INDIGO & SULPHUR AND MERCERIZING DYEING LINE, YEAR RECONDITIONED 2004

 

GREENVILLE CONTINUOS INDIGO & SULPHUR AND MERCERIZING DYEING LINE

IN 20 ROPES

YEAR RECONDITIONED: 2004

AND THEN IT STOPPED ON 2009

STILL ON MILL FLOOR

 

A-BALL WARPING MACHINES:

OFFER 001

RED-CHATWOOD BALL WARPER

MODEL: WC 480

YEAR: 1991

MAX. DIAMETER: 1200mm

TRAVERSE MAX.1200mm

MAX. WEIGHT: 816 KGS

ELECTRONIC CONTROL

2 ROLLERS WITH SENSOR

FOR AUTOMATIC REGULATION

AND CONSTANT AND PERIPHERIC WINDING SPEED

AND TENSION YARN FROM CREEL

QUANTITY: 1

 

OFFER 002

REED-CHATWOOD V CREEL

MODEL: LVC/A

YEAR: 1991

WITH ELECTRONIC TENSION REGULATION

504 POSITIONS WORKING

504 POSITIONS STORAGE

GAUGE 340mm X 340mm

80-WOOD LOG

QUANTITY: 2

 

OFFER 003

INDIGO & SULPHUR AND MERCERIZING ROPES DYEING LINE:

YEAR: 1972

YEAR RECONDITIONED: 2004

GREENVILLE

ROPES RANGE 20 ROPES

THIS ROPE RANGE HAS THE FLEXIBILITY TO PRODUCE 11 DIFFERENT DYEING PROCESS

QUANTITY: 1

 

COMPLETE OF:

OFFER 004

CREEL FOR 20 BALLS WARP POSITIONS

QUANTITY: 1

 

OFFER 005

ROPES YARN INTRODUCTION

AND DRAGGING CALENDER

QUANTITY: 1

 

OFFER 006

TANK1 - SODAING, IMBIBITION AND PURGING TANK

WITH LIQUID CIRCULATION

AND FILTERING GROUP

WITH SQEEZING PADDER FOR 10000 KGS

IN UPPER POSITION

QUANTITY: 1

 

OFFER 007

STEAMER

WITH VERTICAL PASSAGES OF FABRIC BY 6 UPPER

AND UNDER 5 CYLINDERS

CAP.L.M.40

QUANTITY: 1

 

OFFER 008

TANK2- FIXING, WASHING, INDIGO DYEING TANK

WITH SQEEZING PADDER FOR 10000 KGS FOR EACH TANK

QUANTITY: 1

 

OFFER 009

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 010

TANK3 - NEUTRALIZATION, WASHING AND INDIGO DYEING

WITH SQEEZING PADDER 10000 KGS

IRON AISI 316 FOR EACH TANK

QUANTITY: 1

 

OFFER 011

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 012

TANK4-TANK5

WASHING AND INDIGO DYEING TANK

WITH SQEEZING PADDER 10000 KGS FOR EACH TANK

QUANTITY: 2

 

OFFER 013

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 014

TANK6-TANK7 - WASHING AND INDIGO DYEING

BLACK SULPHUR DYEING

WITH SQEEZING PADDER 10000 KGS

FOR EACH TANK

QUANTITY: 2

 

OFFER 015

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

QUANTITY: 1 SET

 

OFFER 016

TANK8 - INDIGO SPECIAL COLORS DYEING

BLACK SULPHUR DYEING TANK

WITH LIQUID CIRCOLATION

AND FILTERING GROUP

WITH SQEEZING PADDER 10000 KGS FOR EACH TANK

QUANTITY: 1

 

OFFER 017

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

IN UPPER POSITION

QUANTITY: 1 SET

 

OFFER 018

STEAMER

WITH VERTICAL PASSAGES OF FABRIC BY 6 UPPER

AND UNDER 5 CYLINDERS

CAP.L.M.40

QUANTITY: 1

 

OFFER 019

INDIGO CIRCULATION TANK

COMPLETED WITH FILTERS, HEATING COILS AND

AUTOMATIC DOSER FOR HYDROSULPHITE CAPACIOUS FOR 200 LT.S

WITH DOSING PUMP FOR AUTOMATIC SODA DOSING

ELECTRONIC EQUIPMENT FOR CONTROL OF PH

AND REDOX PARAMETERS

QUANTITY: 1

 

OFFER 020

TANK9-TANK10 - INDIGO DYEING

BLACK SULPHUR DYEING

WITH SQEEZING PADDER 10000 KGS

FOR EACH TANK

QUANTITY: 2

 

OFFER 021

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

QUANTITY: 1 SET

 

OFFER 022

TANK11-TANK12-TANK13 - HOT WASHING (AND/ OR INDIGO DYEING)

TANK WITH SQEEZING PADDER 10000 KGS

WITH INOX STEEL HOOD AND ASPIRATION FAN

ALL INSIDE AND OUTSIDE TANKS AND CYLINDERS ARE IN INOX IRON

ALL THE TANKS ARE THERMOREGULATED

EACH TANK IS COMANDED BY MOTOR POWER INVERTER

QUANTITY: 3

 

OFFER 023

RAMALLUMIN DRYING CYLINDERS

YEAR: 1972

YEAR RECONDITIONED: 2002

PART OF TEFLONED CYLINDERS

ALL CYLINDERS STEAM HEATING THERMOREGULATED EXIT

20 COILER SYSTEM FOR CANS

DIAMETER: 1200mm X H.800mm

FOR DYEING ROPES

PANEL ELECTRONIC COMPUTERIZED

AND ELECTRIC POWER FOR ALL FUNCTIONS OF THE LINE

ELECTRONIC CONTROL OF THE TENSION OF THE YARN

WITH ELONGATIONS IN %

BETWEEN THE DIFFERENT POINT

MOISTURE CONTROL

QUANTITY: 36

 

OFFER 024

CANS STORAGE

DIAMETER: 1200mm X H.800mm

INCLUDING-CABIES-PIPING

QUANTITY: 60

 

OFFER 025

INOX IRON CONTROL PANEL FOR THE DYEING PROCESS

QUANTITY: 1

 

OFFER 026

INOX IRON CONTROL PANEL FOR THE SPEED REGULATION

QUANTITY: 1

 

OFFER 027

INOX IRON CONTROL PANEL FOR THE COLORS KITCHEN

COLORS AUTOMATIC ELECTRONIC KITCHEN

QUANTITY: 1

 

OFFER 028

COMPOSED WITH:

CAPACIOUS FOR DARK INDIGO SALVAGE FOR 3500 LTS EACH

QUANTITY: 6

 

OFFER 029

CAPACIOUS FOR DARK INDIGO SALVAGE FOR 10000 LTS EACH

ALL THE CAPACIOUSES ARE IN INOX IRON

AND ARE PROVIDED WITH THE ELECTRIC AGITATOR

PART OF THEM ARE THERMOREGULATED

QUANTITY: 6

 

OFFER 030

DIRECT WARPER MACHINES FOR REBEAMING:

REED-CHATWOOD CHAIN BEAMERS DIRECT WARPERS

MODEL: SBB

YEAR: 1991

MAX. SPEED 410 M/MIN

BEAM FLANGE

DIAMETER: 1000mm

BEAM MAX. WEIGHT: 907 KGS

FOR REBEAMING FROM CANS

WITH ROPES DYEING

TO REED-CHATWOOD CHAIN BEAMERS

WITH AUTOMATIC ELECTRONIC PREFEEDER ACCUMULATOR

WITH 2 POSITIVE ROLLERS

FOR ELECTRONIOC CONTROL OF CONSTANT TENSION

AND PERIPHERIC SPEED ROPES

QUANTITY: 1

 

OFFER 031

NUOVA FORMIA CHAIN BEAMERS DIRECT WARPERS

YEAR: 1987

MAX. SPEED: 410 M/MIN

BEAM FLANGE DIAMETER: 1000mm

BEAM MAX. WEIGHT: 907 KGS

FOR REBEAMING FROM CANS

WITH ROPES DYEING

TO NUOVA FORMIA CHAIN BEAMERS

WITH AUTOMATIC ELECTRONIC

PREFEEDER ACCUMULATOR

WITH 2 POSITIVE ROLLERS

FOR ELECTRONIOC

CONTROL OF CONSTANT TENSION

AND PERIPHERIC SPEED ROPES

QUANTITY: 5

 

OFFER 032

WARP BEAMS FLANGE DIAMETER: 1000mm

INSIDE DISTANCE FLANGE TO FLANGE: 1600mm

FOR EXIT CHAIN BEAMERS AND FEEDING CREEL ROTAL

SIZING MACHINE

SPARE PARTS EXISTING IN THE COMPANY

QUANTITY: 100

 

OFFER 033

SIZING MACHINE

ROTAL SIZING MACHINE

YEAR: 1990

QUANTITY: 1

 

COMPOSED WITH:

OFFER 034

FEEDING CREEL FOR 16 POSITIONS FOR BEAMS FLANGE

DIAMETER: 1000mm X INSIDE

DISTANCE FLANGE TO FLANGE 1600mm

QUANTITY: 1

 

OFFER 035

SIZE TANK WITH DOUBLE GROUP OF DOUBLE SQEEZING

3 CYLINDERS EACH SET GROUP

HIGH PRESSURE TYPE

YEAR: 1999

COMPLETE

QUANTITY: 2

 

OFFER 036

DRYER-GROUP MODEL

OF 16 DRYING INOX CYLINDERS

DIAMETER: 800mm

PART OF THEM TEFLONED

WITH SIDE COVERINGS AND ASPIRATOR

QUANTITY: 1

 

OFFER 037

AUTOMATIC BEAMING MACHINE FOR BEAMS

WIDTH: 2600mm

FOR FLANGE DIAMETER: 1200mm

COMPLETED WITH ELECTRONIC CONTROLS, ETC

QUANTITY: 1

 

OFFER 038

SIZING KITCHEN

COMPOSED OF INOX

1 TANK FOR SIZE PREPARATION

CAPACITY: 1000LTS

AND CAPACIOUS FOR COOKING AUTOCLAVE OF 1000 LTS

AND OF 2 STORAGE RESERVE SIZING CAPACIOUS FOR 1500 LTS

COMPLETED WITH ELECTRIC PANEL

WITH THERMOREGULATION, ETC

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: A-1342 (0303138DLA02RFL) A CONTINUOUS FOULARD TUMBLER AND STENTER DRYING MACHINE WORKING TERRY CONTINUOUS FOULARD TUMBLER AND STENTER DRYING MACHINE WORKING TERRY MARK: BABCOCK, KRANTZ, MAHLO YEAR: 1999 WORKING WIDTH: 2450mm 4 STATIONS GAS HEATING WEFT STRAIGHTENING EQUIPMENT QUANTITY AVAILABLE: 12 Learn More

REFERENCE NUMBER: X-0008 ELECTRONICALLY CONTROLLED SEMI-AUTOMATIC FILLING FOR PILLOW, CUSHIONS, QUILTS, BABY MATTRESSES AND MORE THIS MACHINE IS A STAND-ALONE AND VERY VERSATILE PILLOW STUFFING AND BAGGING MACHINE. ITS SIMPLE OPERATION ALLOWS TO USE THE SAME EQUIPMENT TO ACCOMPLISH THE TWO PROCESSES: STUFFING A BATT OR A FOAM CORE IN A COVER (OR AN INSERT IN THE FINAL DEC COVER / A PILLOW IN THE FINAL ZIPPERED COVER) AND/OR PUT A FINISHED PILLOW IN A BAG (INDIVIDUAL PE BAG, TWIN-PACK BAG, ZIPPERED VINYL BAG, ETC). THE MACHINE CAN BE LOADED MANUALLY OR WITH A CONVEYOR ON THE REAR PART, WHILE AN OPERATOR IS NEEDED IN THE FRONT: HE PUTS THE COVER/BAG ONTO THE STUFFING BELTS, ACTIVATES THE TENSIONING FORKS WITH THE PEDAL AND HOLDING THE COVER/BAG FACILITATES THE PILLOW STUFFING. POWER SUPPLY IS 400 VOLTS, WILL NEED A TRANSFORMER TO OPERATE ON 480 VOLTS, INQUIRE IF NEEDED Learn More