Search results for: 'diagram o'

REFERENCE NUMBER: J-2326
QUILTER FOR RAGS, 12 INCH WIDTH – NEW – RAG QUILTER

QUILTING MACHINE FOR RAGS
SEWS RAGS CONTINUOUSLY
SEW HEAD: 7 NEEDLES AND 7 LOOPERS 
MAKES A CHAIN STITCH ON THE CONVEYED RAGS
USES OVERLOCK THREAD
DISTANCE BETWEEN NEEDLES: 250mm (ENSURES THAT EVEN SMALL RAGS ARE SEWN)
1 HP MOTOR, 3-PHASE, 220 VOLT
WITH FREQUENCY INVERTER TO ADJUST THE ROTATION SPEED OF THE MOTOR AS NEEDED
HEIGHT: 1800mm
WIDTH: 960mm
DEPTH; 370mm
CONVEYOR WIDTH: 200mm
CONVEYOR LENGTH: 1560mm
MACHINE TOTAL LENGTH WITH CONVEYOR: 2800mm

AFTER SEWING, THE QUILT IS TRANSPORTED OUT INTO ROLLS WHICH CAN BE CUT ACCORDING TO CUSTOMER NEEDS
OPERATION: PLACE A LARGER RAG AS THE BOTTOM LAYER, SMALLER RAGS AS FILLING, AND ANOTHER LARGER RAG AS THE TOP LAYER. OPERATION REQUIRES 2 TO 3 OPERATORS.
TO REDUCE THE NUMBER OF OPERATORS REQUIRED, A FIBER ROLL AS CAN BE USED AS THE LOWER LAYER. THIS ALSO INCREASES THE PRODUCTION RATE.
DAILY PRODUCTION: VARIES BETWEEN 300 TO 500 KG PER 8 HOURS OF OPERATION
FOR KNIT FABRICS SUCH AS COTTON, VISCOSE, SWEATSHIRT FLEECE, NYLON STRETCH-FABRIC, PIQUET AND POPELINE
THERE IS NO MATERIAL WASTE AS THE MACHINE USES 100% OF THE RAGS
WORKING WIDTH: 12 INCHES
NEEDLE SPACING: 1 INCH
WITH LOOPER STRUCTURE SIMILAR TO THE DIAGRAM BELOW (REDUCES BOTTOM THREAD BREAKAGE)
MACHINE IS NEW, MADE TO ORDER
LEAD TIME: 10 DAYS

Learn More

REFERENCE NUMBER: M-4009

FORMALDEHYDE PLANT & SYSTEMS -90,000 TON PER YEAR

 

90,000 TON/YEAR
(200 MILLION LBS/YR @ 37% CONCENTRATION)

SHUT DOWN: SPRING 2010

PLANT PRODUCES A 37% AND A 50% FORMALDEHYDE SOLUTION BY PARTIAL OXIDATION AND DEHYDROGENATION OF METHANOL.

RAW MATERIALS:

METHANOL

SILVER CATALYST

ORIGINAL PLANT EQUIPPED WITH:

MONSANTO PROCESS

(2) CONVERTERS AND ASSOCIATED EQUIPMENT, ABSORBER AND DISTILLATION COLUMN

MODIFICATIONS:

ADDED 3RD CONVERTER FOR CAPACITY IMPROVEMENTS

METHANOL VENTS SCRUBBER ADDED

WASTE HEAT BOILER ADDED

INSTALLED A DCS ON THE REACTOR SECTION (2006)

PRODUCT SPECIFICATIONS:

CLEAR AQUEOUS SOLUTIONS OF:

50U: 50.0 - 50.45% FA, <1.05% MEOH, <0.055% FORMIC ACID

37U: 37.0 - 37.3% FA, <1.05% MEOH, <0.035% FORMIC ACID

37M: 37.0 - 37.5% FA, 9 - 13% MEOH

OTHER CONCENTRATIONS AS REQUIRED UP TO 50% BOTH INHIBITED AND UNINHIBITED

CONTACT IPP FOR A COMPLETE PROCESS DESCRIPTION AND FLOW DIAGRAM

COMPLETE DOCUMENTATION AVAILABLE

 

FORMALDEHYDE PROCESS UNITS FOR SALE
(MAJOR UNITS ONLY. CONTACT IPP FOR A COMPLETE LIST)

 

2.9 - 20 MM BTU/HR JOHN ZINK THERMAL OXIDIZER SYSTEM

DESIGNED TO INCINERATE TWO SOLVENT LADEN GAS STREAMS USING A SMALL AMOUNT OF NATURAL GAS.

ONE SMALL SOLVENT GAS STREAM WITH A FLOW OF 120 - 320 SCFM, THE OTHER LARGER OFF GAS STREAM OF 8,200 - 17,500 LBS/HR.

GAS BURNER IS RATED FOR 2.9 - 20 MM BTU/HR (INSTALLED NEW IN 2006)

THE WASTE HEAT BOILER PORTION GENERATES STEAM AT 25,000 LBS/HR WITH A PRESSURE OF 75 PSIG (NORMAL) UP TO 125 PSIG (DESIGN).

THE UNIT USES STAGED BURNER TECHNOLOGY TO REDUCE OR ELIMINATE NOX.

CONTACT IPP FOR A MAJOR LIST OF COMPONENTS

 

DISTILLATION COLUMN SYSTEM 

13,000 LBS/HR LIGHT ALDEHYDES AND LIGHT ALCOHOL DISTILLATION

COMPLETE SYSTEM INCLUDES:

72" DIA. X 75' 316LSS BUEHLER-MORRIS DISTILLATION TRAY COLUMN

(2) SS SHELL AND TUBE HEAT EXCHANGERS

2,889 SQ. FT. 304SS, 1,090 SQ. FT. 316SS

(2) 316SS PLATE AND FRAME HEAT EXCHANGERS

478.35 SQ. FT., 73.2 SQ. FT.

(3) PUMPS

241 LBS/HR TO 13,000 LBS/HR

 

BEPEX BRIQUETTER SYSTEM

MODEL 300 MS28

SKID MOUNTED

2.5" DIA.

3,000 PSI MAX. OPERATING PRESSURE

22 RPM ROLL SPEED

INCLUDES 300 HP SIEMENS AC MOTOR, FOOTE JONES GEARBOX AND FEED HOPPER

 

316SS 3-EFFECT BUFLOVAK-BLAW KNOX EVAPORATION SYSTEM

36,900 LBS/HR (16,000 KG/HR)

FIRST EFFECT: 1,480 SQ. FT.

SECOND AND THIRD EFFECT: 2,950 SQ. FT.

INCLUDES (3) VAPOR BODIES WITH 1,900 GALLON CAPACITY, (3) STEAM CHESTS AND (2) OVERHEAD CONDENSERS (1,728 SQ. FT AND 1,605 SQ. FT.)

 

304SS STRUTHERS WELLS "KRYSTAL" CRYSTALLIZER SYSTEM

7' DIA. X 60" WITH 9' CONE BOTTOM

THIS UNIT WILL EVAPORATE APPROXIMATELY 4,400 LBS/HR OF H2O (5 LBS PER SQ. FT. SURFACE AREA OF HEATER)

INCLUDES COMPLETE ACCESSORY PACKAGE: VAPORIZER AND SUSPENSION CONTAINER, STEAM CHEST HEATER, 4,000 GALLON 347SS TANK, LIGHTNIN RIGHT ANGLE MIXER, ELBOW PUMP, OVERHEADS CONDENSER AND HYPULSE FILTER

 

25,400 CFM 321SS FULLER FLUIDIZED BED DRYER

12' DIA. CHAMBER

1,555 CU. FT. DRYING CHAMBER CAPACITY

DESIGNED TO DRY 8,560 LBS/HR OF PELLETS (@ 15% MOISTURE) WITH A DENSITY OF 40 LBS/CU. FT.

114,240 LBS/HR AIR FLOW

1,325,000 BTU/HR HEAT TRANSFER

INCLUDES (3) HEATING COILS (40 PSI STEAM) FOR UNDER BED HEATING

Learn More

P-2927 ROLANDO RC SILVER OPENER WIDTH 500mm YEAR 1998

ROLANDO
TYPE: RC
SILVER OPENER
YEAR: 1998
WORKING WIDTH: 500mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5526 (4401B5LYD3UF) L USTER UT-5 YARN EVENNESS TESTER YEAR 2011 USTER YARN EVENNESS TESTER YEAR 2011 TYPE UT-5 VERSION USTER® TESTER 5-S400/SA (SEMIAUTOMATIC VERSION) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2408 DORNIER HTV 8/SD 220 CTS, YEAR 1992, STAUBLI DOBBY, 4 COLORS DETAILS: MODEL: HTV 8/SD 220 CTS YEAR: 1992 STAUBLI DOBBY 2670/2 YEAR: 2005 WITH 16 LEVERS INSTALLED PLUS 4 COLORS BY GREEN CABLES DIAGRAM PANEL ED4 MECHANICAL LET OFF MECHANICAL TAKE UP QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-1562 DORNIER HTV8/S YEAR 1991 WIDTH 2300mm 8 COLORS DOBBY DORNIER TYPE: HTV8/S YEAR: 1991 WIDTH: 2300mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-0324 PROFILING MACHINE F2200 FOR FOAM MATTRESSES, MATTRESSES, MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH 2200mm WORKING CUTTING HEIGHT 20/200mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0323 PROFILING MACHINE F2000 FOR FOAM MATTRESSES,MATTRESSES,MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH: 2000mm WORKING CUTTING HEIGHT: 20 / 180mm QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: G-1606 SPECIALTY FOAM FORM MACHINE FOR BIKER PADS, OFFICE CHAIRS, PILLOWS, ETC. FORM-PROFILE-CUTTING MACHINE SC11 S TECHNICAL DATA: WORKING CUTTING WIDTH: 1100mm WORKING CUTTING LENGTH: 1200mm VERTICAL ADJUSTMENT OF THE BLADE FROM TABLE: 0/195mm VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/195mm MAXIMUM HEIGHT OF THE FOAM TO BE WORKED: 220mm MAXIMUM DIMENSION OF THE MOULD: 1100 X 1200mm TABLE SPEED: 5/17 M/MIN POWER: 6 KW TENSION: 400 V APPROXIMATE WEIGHT: 1200 KGS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-1567 BIKER PANT PAD MOULD FORM-PROFILE-CUTTING MACHINE SC11 S TECHNICAL DATA: WORKING CUTTING WIDTH: 1100mm WORKING CUTTING LENGTH: 1200mm VERTICAL ADJUSTMENT OF THE BLADE FROM TABLE: 0/195mm VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/195mm MAXIMUM HEIGHT OF THE FOAM TO BE WORKED: 220mm MAXIMUM DIMENSION OF THE MOULD: 1100 X 1200mm TABLE SPEED: 5/17 M/MIN POWER: 6 KW TENSION: 400 V APPROXIMATE WEIGHT: 1200 KGS QUANTITY AVAILABLE: 1 Learn More