Description Technical Parameters Model: SS101 Rated power: 500 kW Inlet steam pressure: 1.0 ± 0.1 MPAA Inlet temperature: 184 (+10 -5) °C Exhaust steam pressure: 0.015 MPAA Rated steam flow: 6 t/h Rated speed: 7500 rpm Critical speed: 12500 rpm Gear box: 7500/1500 Number of impellers: 3 Material: ZG25A front cylinder, ZG25A steam room, 35CrMoA blade, 35CrMoA impeller, 35CrMoA main shaft, HT250 front and rear bearing seat, ZG25A main steam valve, DN100/DN600 steam pipe Over speed protection: 10000 to 10100 rpm Over speed response time: 1 s Vibration: ≤ 0.07 mm Speed control: 1000 to 10000 rpm Noise: ≤ 90 dB Continuous running time: ≥ 8000 h Lube oil: L-TSA46 steam turbine oil Max axial displacement: 0.7 mm Alarm temperature of bearing: 80/90 °C Max temperature of lube oil: 70 °C Coupling: solid coupling Dimensions: 2000 × 1200 × 2000 mm Condenser Cooling area: 100 m² Cooling water: normal 27 °C / max 33 °C Water pressure: ≥ 3 kg/cm² Water flow: 320 t/h Diameter: DN125/DN125 Material: 304 stainless steel pipe Dimensions: Φ 1200 × 2500 mm Flow: 6 t/h Head: 35 mH2O Generator Parameters Rated power: 0.6 MVA Power: 0.5 MW Voltage: 440 V Speed: 1500 r/min Frequency: 60 Hz Efficiency: ≥ 90% Scope of Supply Front cylinder – 1 Rear cylinder – 1 No. 1 stage diaphragm plate – 1 No. 2 stage diaphragm plate – 1 Nozzle – 1 Front bearing seat – 1 Rear bearing seat – 1 Rear bearing – 1 Thrust front bearing – 1 The spindle assembly – 1 The first stage impeller blades – 1 Secondary impeller blades – 1 The third stage impeller blades – 1 Chassis – 1 The turbine end coupling – 1 The generator end coupling – 1 The turbine end coupling shield – 1 The generator end coupling shield – 1 Reduction gear – 1 Quickly closing the main valve – 1 Regulating system assembly – 1 Protection system assembly – 1 Extraction system assembly – 1 Exhaust steam over – 1 Hydrophobic expansion tank – 1 Pipe line – 1 Condenser framework – 1 Security template – 1 Soda line – 1 Ejector – 2 Condensate pump – 2 AC motor – 2 Steam turbine thermal control cabinet – 1 PI pressure gauge PL – 1; inlet steam PI pressure gauge PL – 1; steam condenser chamber PI pressure gauge PL – 2; condensate pump discharge PI pressure gauge PL – 1; ejector PI pressure gauge PL – 2; import and export of circulating water TE the thermal resistance – 1; admission TE the thermal resistance – 1; exhaust steam TI the thermometer – 2; condenser in and out of the water TI the thermometer – 1; condenser hot well TI the thermometer – 1; steam condenser chamber Temperature display instrument – 1; admission Temperature display instrument – 1; exhaust steam PT100 resistance thermometer, with local display – 2; steam turbine bearing temperature before and after Intelligent tachometer – 1 Speed sensor – 1 Spanner of emergency generator – 1 Turning gear tools – 1 Lifting tools of cylinder & rotor – 1 Lifting tools of diaphragm plate – 1 Rear bearing – 1; the steam turbine Thrust front bearing – 1; the steam turbine Oil seal – 4; the steam turbine
