Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Sperotto, Nova Compactor 350/200, 1989, Solvent Scouring Range

Description

  1. Inventory
    1. Inventory number: E-2168
  2. Laboratory Equipment
    1. MacBeth model SPLIIM lab light, serial number 940342
    2. Thelco laboratory oven, model 26, 14 x 12 inch opening
    3. Kenmore extra capacity heavy duty dryer
    4. Kenmore heavy duty washer
    5. Thermolyne hot plate, Cimarec 3, 12 x 12 inches
    6. Zwick fabric tester, type BZW1.0/TH1S, serial number 139149/98, order number 430273, power 115/230 volt, 50/60 cycle
    7. Atlas crockmeter, model CM1, serial number 3114 (manual)
    8. Kenmore 4-stitch sewing machine
    9. Perspiration tester, model 290
    10. Mettler digital scale, serial number 14
    11. Data Color International hand held spectrophotometer, catalog number 1200-0743, serial number 429
    12. Hills fabric cutter, manual
    13. AATCC crockmeter, model CM5, serial number 12543 (manual)
    14. Universal balance scale (grain scale)
    15. Mullens burst tester, motorized, serial number 8215-81-1667
  3. Opening And Slitting
    1. Bianco opener, can be used as a Bianco dry slitter, consisting of: driven cradle, 144 inches wide; driven scroll rolls; plaitor; or 48 inch cradle; set of manual spreaders; cutting knife (side slitting); bar opener; plaitor
    2. Bianco opener, can be used as a Bianco dry slitter, consisting of: driven cradle, 90 inches wide; pull roll; plaitor; buggy; or 40 inch cradle; set of spreaders; cutting blade for side slitting; opener; plaitor
  4. Beam Batcher
    1. Kenyon beam batcher, consisting of: 2-roll unwind stand, 168 inches wide; portable A-frame unwinder, motor driven; 150 inch wide 3-roll compensator; operators platform; Kenyon beam batcher, 160 inches wide on the overfeed, with Tandematic plate guides, E&L type FR1501 rail guides, goes out to 140 inches wide x 30 feet long, with automatic lubrication; 2-roll surface winder for dye beams; all motors and controls
  5. Miscellaneous Equipment For Beam Dye Machines
    1. 11 beam carts for 146 inch long beams
    2. 1 motorized beam cart for 146 inch long beams
    3. 22 dye beams, 20 inch diameter x 146 inches long
    4. 10 dye beams, 15-3/4 inch diameter x 146 inches long
  6. Scouring
    1. Sperotto solvent scouring range, Nova Compactor 350/200, serial number 2028, year 1989, consisting of: LeMeccanica A-frame unwinder, portable; LeMeccanica compensator, 132 inches wide, with a scray; entrance unit with a set of driven uncurlers, 144 inches wide; solvent tank, constructed of all stainless steel; dryer unit; delivery unit; 3-roll compensator; flat folder; stainless steel perchloroethylene filtering unit; 2 distiller units (1 main unit and 1 secondary unit); water blowing tank and a stripper column for exhaust fumes; all motors and controls
  7. Finishing Frames
    1. Santex Santa Frame 5K/O1, serial number 5908, year 2003, consisting of: 2-roll tension device entry; set of E&L uncurlers, with spread bar, 100 inches wide; steam section, stainless steel, which the fabric passes through; operators platform; overfeed, 98 inches wide; entry of the frame with Tandematic plate guides, E&L type FR5302 rail guides, pinning brushes, low profile pin frame, center support for the fabric, 12 feet of entry, automatic lubrication, 88 inches wide x 70 feet long, Micro Design touch screen control, 5 zone, hot oil, with circulating fans on top of the housing (1 for each zone), cooling zone at exit, 8 feet of exit; overhead plaitor; Mahlo moisture monitor mounted at the exit of the frame, model FM1-10, serial number 61101/12/291; 2 exhaust fans (1 in the entry of the frame and 1 in the exit of the frame); all motors and controls; with Fulton hot oil boiler system, type SEFPENTIN, model FT0240C, serial number 29420, 550 volt, 3 phase, 60 cycle, 15 amp, runs off of natural gas, maximum 3,000,000 BTU's, Fulton coil design thermofluid heater, model FT-0240-C, N.B. 3218, serial number 2942-C, 650 degrees F, maximum working pressure 150, including all pumps, motors and valves (goes with Santex frame)
    2. Kenyon tenter frame, consisting of: beam unwind stand, made by Tandematic, will take 190 inch wide dye beam; Tandematic scray, set of pull rolls at the top, 140 inches wide, stainless steel pan; Tandematic opening system, 140 inches wide; slat expander; 140 inch wide pad, with a driven rubber scroll roll and 2 rubber vertical rolls, 10 inch diameter, with stainless steel pan, pneumatic, 5 ton; Mahlo weft straightener, model Orthomat FMC, 2 meters wide; overhead tension bar, 140 inches wide; Kenyon tenter frame, 144 inches wide overfeed, with Tandematic plate guides, E&L FR150 rail guides, pinning brushes, over and under, pins only, with center support system before the housing, steam section, Lincoln lubrication system, gummers, 30 feet of entry before the house, 90 feet of oven, 8 zone, oil fired, 2 circulating fans per zone, at exit of the frame is a cooling zone, edge trimmers, 18 feet of exit; Gravimat FM1-7A moisture control system; operators platform; inline inspection board; Krantz automatic batcher, model 701M, serial number 8065, 168 inches between sides, with 2 rolls in the center which are 140 inches, not only has surface wind but also A-frame winder; if not using the batcher when it comes over the inspection board, it goes to a box plaitor; all motors and controls; with pollution control incinerator for fume extraction, made by OCAP, which extends through the roof (Etec Energy Innovators, job number E786-2, customer number 7826NPO, hot oil boiler, with a Process Combustion Corp. incinerator, including all pumps, motors, etc.) (used for Kenyon tenter)
  8. Calendering And Compacting
    1. Santex compacting machine, type SANTA COMPACT-260, serial number 4899, 3x575 volts plus TE115 volts, 60 cycle, year 1999, consisting of: tension bar, driven scroll rolls, spreader roll, 122 inches wide; operator platform; tenter frame, pin type, Tandematic plate guiders, with E&L type FR-5501 rail guides, pinning brushes, with steam section, overfeed roll, 122 inches wide, tenter frame is 27 feet long, selvedge trimmers; Santex compactor, 120 inches wide, with felt blanket, 100 inches wide, with inline inspection machine, type LM83NS, serial number 118149983NS-24, with back lighted board; operators platform; 2-roll batching station, 110 inches wide, made by LaMeccanica Spa, with manual cutting blade, automatic doffing; 3 LeMeccanica tape dispensers, which tapes the roll; all motors and controls
  9. Surface Finishing
    1. Lafer GR1-90 double deck sueder (duplex), serial number 10GR20120, year 1998, 90 inches wide, touch screen