Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Yarn Dryer, 30kg Capacity, Stainless Steel, 15 HP Blower

Yarn Dryer, 30kg Capacity, Stainless Steel, 15 HP Blower

Description

  1. Overview
    1. Bobbin and cones dryer in closed vessel – without pressure – working by differential pressure principle and high volume blower and loads up to 30 kg (base: 100% pes).
    2. Equipment manufactured in steel plate with special surface treatments for drying textile yarns in cones or bobbins placed in the internal fixed carrier (triangular spindles).
    3. It is necessary condition that the yarn after dyeing process has to be centrifuged around 20 minutes and then goes to the yarn dryer 30.
    4. Inside of the equipment, hot and dry air are controlled electronically and will pass starting from the bottom to the top, thus taking the control of relative humidity made by a humidity sensor.
    5. This cycle will happen again as many times it is necessary for an ideal humidity read at electronic controller.
    6. The average temperature of air in the system is around 90 degrees celsius (194 degrees fahrenheit) considered ideal for drying natural and artificial materials.
  2. Average Drying Time (30 Kg Of Material)
    1. Cotton yarn: 2 hours (humidity 6%).
    2. Polyester yarn: 40 minutes (humidity 3%).
    3. Pes+co (~400 g/dm3): 2 hours, 50 minutes.
    4. Times will be able to vary in function of the density of yarn package.
  3. Specifications
    1. Height: 1570 mm.
    2. Width: 1450 mm.
    3. Depth: 1600 mm.
    4. Loading nominal capacity: 30 kg.
    5. Yarn dryer 30 nominal capacity: 30 kg.
    6. Fixed triangular spindles: 8.
    7. Number of cones co/pes/spindle: 4.
    8. Cones/little bobbin max load (kg): 1.0 kg, 2.7 kg.
    9. Maximum loading (little bobbins): 28 kg.
    10. Number of bobbins pes diaflex/spindle: 2.
    11. Bobbin (diaflex) max load (kg): 2.7 kg.
    12. Carga total diaflex grande: 27.8 kg.
    13. 4 spindles ep.720.c.304.
    14. Blower: 11.25 (15) pot. [kw] [cv].
    15. Heating (steam valve) diameter: 3/4”.
    16. Water valve return diameter: 3/4”.
    17. Heat exchanger drain diameter: 1/2”.
    18. Air pressure available: 6 to 7 bar.
    19. Steam pressure available: 6 to 7 bar.
    20. Steam consumption for heating cycle mass: 18 kg.
  4. Construction And Finishing
    1. Made by stainless steel treated.
    2. Internal and external finishing with texturized epoxy.
    3. Air steam to differential pressure.
    4. High efficiency heating by a powerful heat exchanger.
    5. Textile dryer under differential pressure yarn dryer.
    6. Acoustic isolation on the ventilation chamber to avoid the noise spreading.
    7. Ventilation on the acoustic chamber for motor cooling.
    8. Door gasket.
    9. Support flanges and clamps in stainless steel.
  5. Control Panel
    1. Microprocessed control panel, built-in on the side of the equipment, where: temperature control and control of the air discharge flap.
    2. Relative humidity sensor to control the real yarn humidity with an alarm when the set point humidity is reached.
    3. Motor is driven by a soft starter.
    4. On/off switch.
    5. Function leds and soft touch keyboard.
    6. Pneumatic valve drives the steam quantity in the machine.
  6. Included Accessories
    1. Steel cart to carry the pallet.
    2. Stainless steel cart to carry spindles (they could be triangular or perforated tubes).
  7. Additional Notes
    1. The vb models are smaller versions, so they just come with triangular spindles.