Search results for: 'table draw'

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5221 (1313565TNY12RX) L
NONWOVEN LINE WIDTH 2500mm

CARD FEEDING
CARDING

QUANTITY AVAILABLE: 1

Learn More

T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987 MAKE: ALBRECHT BAUMER MODEL: IS-M SPEED: 0 TO 40 METERS PER MINUTE CUTTING HEIGHT: 1300mm KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz POWER REQUIREMENT: 4 KW YEAR: 1987 RIGHT TABLE: 2435mm BUN WIDTH (RIGHT TABLE): 2200mm BUN LENGTH: 2580mm LEFT TABLE: 2435mm BUN WIDTH (LEFT TABLE): 2200mm BUN LENGTH: 2580mm) QUANTITY: 1 Learn More

REFERENCE NUMBER: G-1606 SPECIALTY FOAM FORM MACHINE FOR BIKER PADS, OFFICE CHAIRS, PILLOWS, ETC. FORM-PROFILE-CUTTING MACHINE SC11 S TECHNICAL DATA: WORKING CUTTING WIDTH: 1100mm WORKING CUTTING LENGTH: 1200mm VERTICAL ADJUSTMENT OF THE BLADE FROM TABLE: 0/195mm VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/195mm MAXIMUM HEIGHT OF THE FOAM TO BE WORKED: 220mm MAXIMUM DIMENSION OF THE MOULD: 1100 X 1200mm TABLE SPEED: 5/17 M/MIN POWER: 6 KW TENSION: 400 V APPROXIMATE WEIGHT: 1200 KGS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-1567 BIKER PANT PAD MOULD FORM-PROFILE-CUTTING MACHINE SC11 S TECHNICAL DATA: WORKING CUTTING WIDTH: 1100mm WORKING CUTTING LENGTH: 1200mm VERTICAL ADJUSTMENT OF THE BLADE FROM TABLE: 0/195mm VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/195mm MAXIMUM HEIGHT OF THE FOAM TO BE WORKED: 220mm MAXIMUM DIMENSION OF THE MOULD: 1100 X 1200mm TABLE SPEED: 5/17 M/MIN POWER: 6 KW TENSION: 400 V APPROXIMATE WEIGHT: 1200 KGS QUANTITY AVAILABLE: 1 Learn More

TT-5852 MASCOTT PLUS 25-30 CROSSLAPPER AND MONO_1AB_27-3000 NEEDLE LOOM Learn More

REFERENCE NUMBER: M-0323 PROFILING MACHINE F2000 FOR FOAM MATTRESSES,MATTRESSES,MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH: 2000mm WORKING CUTTING HEIGHT: 20 / 180mm QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: M-3984

RING SPINNING

 

(1) TRUTZSCHLER BLENDOMAT BDT 019, YEAR 1990

(1) TRUTZSCHLER BLENDER GBRA 1000, YEAR 1990

(1) TRUTZSCHLER AXIFLOW AFC, YEAR 1990

(1) TRUTZSCHLER MULTIMIXER MPM8/1400, YEAR 1990

(1) TRUTZSCHLER SEPAROMAT ASTA 800, YEAR 1990

(2) TRUTZSCHLER SILO BEB 1200, YEAR 1990

(2) TRUTZSCHLER FIBER OPENER RST, YEAR 1990

(5) TRUTZSCHLER CONDENSER LVSA, YEAR 1990

(4) TRUTZSCHLER FAN TV 425, YEAR 1990

(2) TRUTZSCHLER FAN TVF 425, YEAR 1990

(3) TRUTZSCHLER FAN TV 500, YEAR 1990

(1) TRUTZSCHLER FAN TVK 650, YEAR 1990

(3) TRUTZSCHLER FILTER SFV 123, YEAR 1990

(1) TRUTZSCHLER FILTER SFF 3, YEAR 1990

(3) TRUTZSCHLER CYCLON ANB AT, YEAR 1990

(1) TRUTZSCHLER FEED TABLE (OPENING) M30 S/C, YEAR 1990

(2) TRUTZSCHLER FEED TABLE (FILTER) S/N S/C, YEAR 1990

(1) TRUTZSCHLER FEED TABLE (CARDS), YEAR 1990

(14) TRUTZSCHLER CHUTE FEED FBK 533, YEAR 1990

 

(5) RIETER DRAW FRAME SB2, CAN SIZE 1000x1200mm, YEAR 1997

(2) RIETER DRAW FRAME RSB D30, CAN SIZE 500x1000mm, YEAR 1999

(3) RIETER DRAW FRAME RSB 951, CAN SIZE 600x1200mm, YEAR 1997

 

(2) ZINSER/HARA LAP FORMER 820, 20 POSITIONS, 1000x1040mm, YEAR 1990

(12) ZINSER/HARA COMBER 830, CAN SIZE 500x1200mm, YEAR 1990

(1) ELECTRONIC CLEANER PANEL, YEAR 1990

 

(5) ZINSER ROVING FRAME 660, 120 POSITIONS, 16x6, CAN SIZE 500x1000mm, YEAR 1990.

(3) SOHLER AIRTEX OVERHEAD BLOWER SP 88 ZB, YEAR 1990

 

(20) ZINSER RING FRAME 321E, 1000 SPINDLES, RING DIA 45mm, GAUGE 75mm, YEAR 1990

(10) SOHLER AIRTEX OVERHEAD BLOWER AP 88 ZZ WI, YEAR 1990

(1) SUCTION FAN, YEAR 1990

 

(4) MURATA WINDER 7 II (MACH CONER), 60 POSITIONS, WITH LUWA OVERHEAD BLOWER, YEAR 1990

 

(1) XORELLA STEAMER CONTEXXOR, YEAR 1990

Learn More

REFERENCE NUMBER: M-0324 PROFILING MACHINE F2200 FOR FOAM MATTRESSES, MATTRESSES, MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH 2200mm WORKING CUTTING HEIGHT 20/200mm QUANTITY AVAILABLE: 1 Learn More

TT-2778 NATIONAL 110 UE 1500 HP SCR OIL RIG, YEAR 2006 NATIONAL 110 UE 1500 HP SCR MAJOR REBUILD LIKE NEW (RIG BUILT NEW IN 2006) Learn More