Search results for: 'a-2'

REFERENCE NUMBER: M-4608 (11116SWJK10R) L VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm LAMINATING LINE MANUFACTURER: VILLARS (CH) ACTUALLY SANTEX YEAR OF CONSTRUCTION: 1993 WORKING WIDTH: 2200mm (NOMINAL WIDTH 2100mm) OPERATING VOLTAGE: 3X380(400)V TOTAL POWER: 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION: INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997): 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS: 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED. ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM MANUFACTURER: MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR OF CONSTRUCTION: 1999 OPERATING VOLTAGE: 3X380V CAPACITY ACCUMULATOR: +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE MANUFACTURER: MENZEL YEAR OF CONSTRUCTION: 2000 OPERATING VOLTAGE: 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT. KNOWN PROBLEM: PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) MISCELLANEA SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS CAN BE INSPECTED BUT NOT IN PRODUCTION MACHINE WILL BE DISMANTLED AT END OF NOV 2014 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

V-2067 (LIST) LAMINATING LINE FOR FOAM PANELS (GLUE LAMINATOR), GLENRO (ONE LINE), YEAR 2019– SOLD TOGETHER – CANNOT BE SEPARATED REFERENCE NUMBER: TT-2036 ATLANTA ATTACHMENT COMPANY BELT CONVEYOR LOADING, DIMENSION 7FT X 8FT X 3FT, YEAR 2019 USED QUANTITY: 1 REFERENCE NUMBER: TT-2037 ATLANTA ATTACHMENT COMPANY - APER GLUE LAMINATOR, WORKING WIDTH 84”, YEAR 2019 USED QUANTITY: 1 REFERENCE NUMBER: TT-2038 GLENRO OVEN, YEAR 2019 USED QUANTITY: 1 REFERENCE NUMBER: TT-2039 ATLANTA ATTACHMENT COMPANY BELT CONVEYOR, DIMENSION 7FT X 10.5FT X 3FT, YEAR 2019 USED QUANTITY: 1 REFERENCE NUMBER: TT-2040 ATLANTA ATTACHMENT COMPANY BELT CONVEYOR ASSEMBLY, DIMENSION 7FT X 10.5FT X 3FT, YEAR 2019 USED QUANTITY: 1 REFERENCE NUMBER: TT-2041 ATLANTA ATTACHMENT COMPANY PRESS, YEAR 2019 POLY USED QUANTITY: 1 TOTAL QUANTITY: ONE LINE (SOLD TOGETHER) Learn More

J-3163 PUR HOT MELT GLUE LAMINATING MACHINE, WORKING WIDTH 2200mm WORKING WIDTH: 2200mm ROLLER WIDTH: 2400mm LAMINATES FABRIC TO FABRIC AND FABRIC TO FILM GLUE TYPE: HOT MELT PUR GLUE WORKING SPEED: 0 TO 40M/MIN HEATING METHOD: ELECTRICITY, THERMAL OIL INSTALLED CAPACITY: ABOUT 80KVA COMPRESSED AIR: 4-8BAR HEATED PIPE LENGTH: 5M MAIN CONFIGURATION PART ONE BASE FABRIC UNWINDING DEVICE UNWINDING RACK - 4 SET φ74 PNEUMATIC SHAFT - 4 PC DAMPING DEVICE - 4 SET UNWINDING UNIT - 4 EA EPC POSITION ADJUST DEVICE - 1 SET φ75 ALUMINUM ALLOY ROLLER - 5 PC MACHINE RACK - 1 SET FOOTBOARD - 1 EA Learn More

J-3048 DOUBLE BELT FLAT BED LAMINATOR, WORKING WIDTH 1800mm, FOR PU, PP & PE FILM – 10 μm DOUBLE BELT FLAT BED LAMINATOR WORKING WIDTH 1800mm (DIFFERENT WIDTHS AVAILABLE) FOR INDUSTRIAL TEXTILES: PU FOAM, POLYPROPYLENE OR POLYESTER FILM FILM THICKNESS: 10 μm QUANTITY: 1 Learn More

T-8401 HANSA/OMAR/MATHYS COATING/LAMINATION LINE, WIDTH 2500mm, YEAR 2015 COMPLETE LINE FOR CARPET BACKING WITH BOTH LATEX-LICK ROLL APPLICATION AS WELL AS GELFOAM APPLICATION POSSIBILITIES, DESIGNED FOR SPECIAL CARPET, CUSTOMER ORIENTED PRODUCTS FOR NICHE CARPETS AND SHORT PRODUCTION SERIES CONSISTING OF: 1 OMAR ENTRY WITH J-BOX 1 HANSA MIXER TYPE COMPACT MIX 600 1 MATTHYS APPLICATION UNIT FOR BOTH LATEX ROLL APPLICATION AS WELL AS GELFOAM APPLICATION 1 WEISSTECHNIK INFRARED UNIT 1 OMAR DRYER COVERING 7 COMPARTMENTS WITH COOLING ZONE 1 EXIT IN PLAITING WITH J-BOX ACCUMULATOR LINE IS COMPLETE WITH ALL ELECTRICAL CABINETS AND OTHER RELEVANT ACCESSORIES INSTALLED IN 2015 AND VERY LITTLE USED. OVERALL TECHNICAL INFORMATION IS; CONNECTED FOR 3 X 885 AMPS, 550 KW (OF WHICH INFRARED IS 130 KW), MAX. SPEED 5 M/MIN, AVERAGE WEIGHT OF COATING 400 - 600 GRAMS QUANTITY: 1 Learn More

YY-2083 KFK-E 1500 MACHINE, LOADING BELT 910mm AVAILABILITY: IMMEDIATELY QUANTITY: 1 Learn More

YY-2082 KFK-C 1900 MACHINE, LOADING BELT 750mm AVAILABILITY: IMMEDIATE QUANTITY: 1 Learn More

YY-2842 GRIBETZ STRATA LAMINATION MACHINE, MODEL GLM011, YEAR 2011 A stock video of this machine is available on YouTube here: https://youtu.be/2UiyG3awRQg QUANTITY: 1 Learn More

TT-1631 FOAM GLUER LAMINATOR, 81”, YEAR 2010 FOAM GLUER LAMINATOR NANTONG HEALTHCARE MACHINERY MODEL CNCHK-10 YEAR 2010 USED TO LAMINATE POLYURETHANE FOAMS AND POLYESTER FIBERS REMOVED FROM OPERATION QUANTITY: 1 Learn More