Search results for: 'pro+4+pro'

THIES AIR STREAM 2 ROPES HT 140 °C 2 x ROPE DYEING MACHINE THIES AIR STREAM 4 ROPES HT 140 °C 3 x ROPE DYEING MACHINE Learn More

REFERENCE NUMBER: L-5737

LAUNDEROMETER

 

FOR ALL KINDS OF COTTON, WOOL, HEMP, SILK, CHEMICAL FIBER AND OTHER TEXTILES

STANDARDS: GB/T3921.1, GB/T3921.5, ISO105 D01, ISO105 C01, ISO105

C05, ISO105 D01, ISO105, BS1006, GB/T5711, JIS L 0844, JIS L 0860, AATCC 61

TOUCH SCREEN DISPLAY

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: L-5934

MONFORTS 6-F TWIN AIR STENTER YEAR 2003 – WORKING WIDTH 2400mm

 

STENTER

RAMA MONFORTS

MAKE: MONFORTS

MODEL: 6-F TWIN

YEAR: 2003

440 VAC 60HZ

NATURAL GAS

AIR COMPRESSOR 7 BAR

 

QUANTITY: 1

Learn More

P-2661 KUSTERS E COMMERCE CYLINDER MERCERIZING MACHINE YEAR 1996 to 2002 WIDTH 1800mm

KUSTERS
TYPE: E COMMERCE
CYLINDER MERCERIZING MACHINE
YEAR: 1996 to 2002
ROLLER WIDTH: 2000mm
WORKING WIDTH: 1800mm
ENTRANCE FROM J-BOX WITH KUSTERS IMPREGNATION PADDER
CHEMICAL PRODUCT DISPATCH TANKS
CYLINDER
MERCERIZING BED – 7 MT
SQUEEZING PADDER
CHAIN DRUM FOR STABILIZATION
CYLINDER MERCERIZING BED – 7 MT
SQUEEZIND PADDER
2 INOX STEEL MEANDER WASHING UNIT
TYPE: 234.43
CLOTH CONTENT 15 MT EACH WITH REALTIVA PADDER LINEAR PRESSURE 50N/MIN
DOUBLE WINDER WITH J-BOX
GROUP PREPARATION OF WATER
CAUSTIC SODA WITH TANKS AND MIXER
METALIC FRAME
ELECTRIC AND CONTROL PANEL

QUANTITY: 1

Learn More

P-4952 FRATELLI ROSA 300 GARMENT DYEING MACHINES 300KG CAPACITY

FRATELLI ROSA
MODEL: 300
GARMENT DYEING MACHINES
NOMINAL LOAD CAPACITY OF 300 KILOGRAMS
REAL LOAD CAPACITY 150/160 KILOGRAMS
ROTARY DYEING BASKET DIVIDED IN 3 COMPARTMENTS
2 TANKS FOR INTRODUCTION OF DYES AND CHEMICAL PRODUCTS
PROGRAMMER FOR THE DYEING CYCLE
MACHINES IN VERY GOOD CONDITION

QUANTITY: 2

Learn More

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

 

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.

Learn More

REFERENCE NUMBER: C-3882

BRAZZOLI HT JET DYEING

MODEL: INNODYE INNOINN HT

YEAR: 2003

CAPACITY: 400 KGS

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3839
MINNETTI HYDRO EXTRACTOR
DIAMETER: 1600mm
YEAR: 2000
CAPACITY: 400 KGS
SPEED: 700 RPM
QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2419 MAIBO ROPE DYEING MACHINE OF/PA, CAPACITY 25 KGS, YEAR 1994 DETAILS: MODEL: OF/PA OVERFLOW SYSTEM MAX TEMPERATURE 98°C (ATMOSPHERIC) YEAR: 1994 NOMINAL LOADING CAPACITY: 25 KGS DEVICE FOR THE COUPLING OF THE MACHINES IN PARALLEL TANK FOR THE DYESTUFF AND CHEMICAL PRODUCTS ELECTRICAL CABINET WITH PROGRAMMER TERMOELETTRONICA MODEL: CT 401 QUANTITY AVAILABLE: 2 Learn More