Search results for: 'Line b'

REFERENCE NUMBER: M-1487 (660125KJH5RXM) CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC YEAR 2000 WIDTH 3600mm CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC MEZZERA BIANCO ROLLERS WIDTH: 3800 mm WORKING WIDTH: 3600 mm YEAR OF CONSTRUCTION: 2000 COMPOSED OF: - DOUBLE INTRODUCTION, FRAME MANUFACTURED IN PAINTED FE PROFILES , SLINGING BY ADJUSTABLE FLYWHEELS, 2 GROUPS OF WIDENING-CENTRING ROLLERS E+L KF20, FABRIC GUIDING ROLLERS IN AISI 316, DRAGGING CALANDER WITH 3 ROLLERS. - BY-PASS AND SYNCHRONIZATION BRIDGE COMPOSED OF : FRAME IN CARBON STEEL FE37, GROUP OF GUIDING ROLLERS IN STAINLESS STEEL COMPLETE WITH SELF-ALIGNED BEARINGS TO GUIDE THE FABRIC TO THE FOLLOWING SECTION . - ROLLER WASHING UNIT IN OPEN WIDTH , MOD. ACTIVA 30, WITH DOUBLE FABRIC DWELLING. - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - SQUEEZING SYSTEM WITH : 2 ROLLERS COATED RUBBER/EBONITE, RUBBER HARDNESS 75-80 SHA, WORKING PRESSURE 3000 KG, A.C. MOTOR GEARBOX, INVERTER, PNEUMATIC DRIVE. - ROLLER WASHING UNIT IN OPEN WIDTH , MOD. ACTIVA 30, WITH DOUBLE FABRIC DWELLING. - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - SQUEEZING SYSTEM WITH : 2 ROLLERS COATED RUBBER/EBONITE, RUBBER HARDNESS 75-80 SHA, WORKING PRESSURE 3000 KG, A.C. MOTOR GEARBOX, INVERTER, PNEUMATIC DRIVE. - ROLLER WASHING UNIT IN OPEN WIDTH, MOD. ACTIVA 20, WITH SIMPLE FABRIC DWELLING - INTERMEDIATE SEPARATOR FOR TANK SPLITTING - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - DELIVERY GROUP WITH PNEUMATIC FOULARD OF 10 TON RUBBER/EBONITE, COMPLETE WITH BEARING FRAME AND PROTECTION CASING. RUBBER ROLLER WITH HIGH SQUEEZING EFFECT ROLLIN - SECOND DISCHARGING STACK - PUMP FOR THE BATH RECYCLING IN THE NEUTRALIZATION PART - PH-METER WITH DOSING PUMP TO NEUTRALIZE IN THE FIRST SECTION OF THE LAST TANK - BIG BATCHER, ADHERING TYPE, DRIVEN BY MOTOR WITH VARIABLE SPEED. - SLAT WIDENING UNIT FOR DOUBLE ROW - 2 DUCTING FOR THE WATER RECOVERY BETWEEN THE 2 WASHING UNITS IN OPEN WIDTH - 3 TEMPERATURE AUTOMATIC CONTROLS PER EACH WASHING UNIT - 4 SETS OF PROPORTIONAL VALVES WITH LITER COUNTER - COMPLETE MOTORIZATION OF THE LINE WITH MOTORS GROUP, ELECTRIC CONTROL CABINET AND SYNOPTICAL PANEL. - VERTICAL DRYER RAMALLUMIN COMPOSED OF 2 COLUMNS WITH 8 ROLLERS, IN ORDER TO DRY BOTH FACES OF THE FABRIC, FOR A TOTAL OF 16 DRYING ROLLERS. O MAX. WORKING WIDTH: 3600 mm. O MAX. MECHANICAL SPEED: 80 MT./MIN. O MAX. WEIGHT OF THE FABRIC, IN WIDTH 3400 mm 900 GR./LINEAR METER O FORESEEN WORKING SPEED WITH FABRIC W=3400mm W=850 GR. 40/45 MT./MIN. O FORESEEN WORKING SPEED WITH FABRIC W=3400 W=425 GR. 80 MT./MIN. O MODIFIED, AS FOLLOWS, WITH ADDITIONS OF : 2 COOLING ROLLERS, 1 SET OF ACCESSORIES FOR THE FEEDING AND RETURN OF THE COOLING WATER, SET OF COMPONENTS FOR THE CONTROL, 4 RETURN CYLINDERS, COMPENSATING GROUP ON THE INTRODUCTION SIDE, 3 SUCTIONING HOODS, 1 EXHAUSTER. Learn More

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2524 BRUCKNER STENTER YEAR 2000 WIDTH 3600mm 8 CHAMBERS AS HEATED BRUCKNER STENTER YEAR: 2000 WIDTH: 3600mm COMPOSED OF: BIANCO ENTRY YEAR: 2000 MODEL: LINEA ENTRATA RAM FOULARD 2 ROLLERS WITH PNEUMATIC PRESSURE VDTEX WEFT STRAIGHTNER WITH 8 HEADS 6 METERS ENTRY HORIZONTAL PIN CHAIN 8 CHAMBERS GAS HEATED WITH BRUCKNER ECLIPSE BURNERS EXIT BY BIANCO YEAR: 2000 MODEL: LINEA USCTICA RAM QUANTITY AVAILABLE: 1 Learn More

TT-1780 JACOB MULLER COATING, DRYING AND FINISHING LINE FOR NARROW FABRICS, YEAR 2014 QUANTITY: 1 Learn More

REFERENCE NUMBER: M-0001 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC 3600mm YEAR 2000 MAKE: MEZZERA/RAMALLUMIN ROLLERS WIDTH: 3800mm WORKING WIDTH: 3600mm YEAR: 2000 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5281 (1313DGFFXX12) L IRA GRIFFIN INDIGO DYEING LINE FOR DENIM YEAR 2005 INDIGO DYEING LINE FOR DENIM (1) X DIRECT WARPING MACHINE WESTPOINT USA YEAR 2005 (1) X INDIGO DENIM COLORING PLANT IRA GRIFFING USA YEAR 2005 (13) X BOX DYEING COLORING DEVICES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5162 (12122ZTQBK11RX) L BRUCKNER STENTER YEAR 2000 WIDTH 3600mm BRUCKNER STENTER YEAR 2000 WIDTH 3600mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1900 (77060YGH6RXM) KUSTERS CONTINUOUS WASHING LINE OPEN WIDTH -WORKING WIDTH: 1800mm SECOND HAND OPEN WIDTH CONTINUOUS WASHING LINE MAKE KUSTERS ROLLER WIDTH: 2000mm WORKING WIDTH: 1800mm COMPOSED BY 5 WASHING BOXES KUSTERS/ROTOJET KUSTERS/ MEZZERA (1999) ENTRY WITH J-BOX 2 PADDERS OMAS 1 SQUEEZING BETA EXIT IN PLAITER OR BIG BATCH QUANTITY AVAILABLE: 1 Learn More

P-2661 KUSTERS E COMMERCE CYLINDER MERCERIZING MACHINE YEAR 1996 to 2002 WIDTH 1800mm

KUSTERS
TYPE: E COMMERCE
CYLINDER MERCERIZING MACHINE
YEAR: 1996 to 2002
ROLLER WIDTH: 2000mm
WORKING WIDTH: 1800mm
ENTRANCE FROM J-BOX WITH KUSTERS IMPREGNATION PADDER
CHEMICAL PRODUCT DISPATCH TANKS
CYLINDER
MERCERIZING BED – 7 MT
SQUEEZING PADDER
CHAIN DRUM FOR STABILIZATION
CYLINDER MERCERIZING BED – 7 MT
SQUEEZIND PADDER
2 INOX STEEL MEANDER WASHING UNIT
TYPE: 234.43
CLOTH CONTENT 15 MT EACH WITH REALTIVA PADDER LINEAR PRESSURE 50N/MIN
DOUBLE WINDER WITH J-BOX
GROUP PREPARATION OF WATER
CAUSTIC SODA WITH TANKS AND MIXER
METALIC FRAME
ELECTRIC AND CONTROL PANEL

QUANTITY: 1

Learn More

A-2076 MONFORTS SANFORIZING LINE FOR KNITTING FABRICS, YEAR 1989, WIDTH 2200MM

MODEL: TOPTEX/W
YEAR: 1989
ROLLERS WIDTH: 2400 MM
WORKING WIDTH 2200 MM
RUBBER CONVEYOR BELT WIDTH: 2300 MM
RUBBER CONVEYOR BELT REPLACED IN 2014
RUBBER THICKNESS: 66 MM
FABRIC ENTRY FRAME WITH ADJUSTABLE FABRIC BRAKE DEVICE

ROLLING MACHINE
MAKE: TESTA
WITH INSPECTION TABLE FOR QUALITY CONTROL OF FABRICS

QUANTITY: 1

Learn More