Search results for: 'dye'

REFERENCE NUMBER: M-4564 (1111433WHH10UX) L FONGS HT CONE DYEING MACHINES YEAR 2007-2008 1 X FONGS SAMPLE HT CONE DYEING MACHINE ( LABWIN-3 ) 3 BOBBINS, YEAR 2007, MAXIMUM CAPACITY 4 KG 1 X FONGS SAMPLE HT CONE DYEING MACHINE ( LABWIN-3 ) 3 BOBBINS, YEAR 2008, MAXIMUM CAPACITY 4 KG 1 X FONGS HT CONE DYEING MACHINE ( ALLWIN50 ) 30 BOBBINS, YEAR 2007, MAXIMUM CAPACITY 45 KG 2 X FONGS HT CONE DYEING MACHINE ( ALLWIN53 ) 30 BOBBINS, YEAR 2008, MAXIMUM CAPACITY 45 KG 1 X FONGS HT CONE DYEING MACHINE ( ALLWIN70 ) 48 BOBBINS, YEAR 2007, MAXIMUM CAPACITY 72 KG 1 X FONGS HT CONE DYEING MACHINE ( ALLWIN70 ) 48 BOBBINS, YEAR 2008, MAXIMUM CAPACITY 72 KG 1 X FONGS HT CONE DYEING MACHINE ( ALLWIN90 ) 96 BOBBINS, YEAR 2007, MAXIMUM CAPACITY 144 KG 1 X FONGS HT CONE DYEING MACHINE ( ALLWIN90 ) 96 BOBBINS, YEAR 2008, MAXIMUM CAPACITY 144 KG 1 X FONGS HT CONE DYEING MACHINE ( ALLWIN105 ) 189 BOBBINS, YEAR 2007, MAXIMUM CAPACITY 283 KG 1 X FONGS HT CONE DYEING MACHINE ( ALLWIN120 ) 270 BOBBINS, YEAR 2007, MAXIMUM CAPACITY 405 KG THERE IS A FULL AUTOMATIC KITCHEN THERE IS A SEPARATE PRICE FOR THIS KITCHEN IT IS WITH PROGRAMMABLE CONTROL UNITS – PLC CONTROLLER SETEX 737 XL QUANTITY AVAILABLE: 11 Learn More

REFERENCE NUMBER: M-0716 THERMOSOL DYEING MACHINE YEAR 2005 WIDTH 3200mm THERMOSOL DYEING MACHINE YEAR 2005 ROLLER WIDTH 3400mm WORKING WIDTH 3200mm QUANTITY AVAILABLE: 1 Learn More

TT-2821 KUSTERS/RAMISCH DYEING PADDER MACHINES, YEAR 1968 TO 1996 ITEM 001 DYEING PADDER WITH TWO ROLLERS (FOR DYEING SAMPLES) QUANTITY: 1 ITEM 002 DYEING PADDER KUSTERS WITH TWO ROLLERS QUANTITY: 1 ITEM 003 DYEING PADDER RAMISCH KLEINEWEFERS QUANTITY: 1 ITEM 004 DYEING PADDER KUSTERS QUANTITY: 1 ITEM 005 DYEING PADDER KUSTERS QUANTITY: 1 Learn More

TT-7001 THIES JET DYEING MACHINES, YEAR 1997 TO 2018 ITEM 001 1. THIES JET DYEING MACHINE MODEL TRD 2. YEAR 2018 QUANTITY: 1 ITEM 002 1. THIES JET DYEING MACHINES MODEL TRD 2. YEAR 2018 QUANTITY: 2 ITEM 003 1. THIES AIR JET DYEING MACHINES MODEL AIRSTREAM 2. YEAR 1999 QUANTITY: 2 ITEM 004 1. THIES LONG PIPE JET DYEING MACHINE MODEL SOFT TRD 2. YEAR 2000 QUANTITY: 1 ITEM 005 1. THIES LONG PIPE JET DYEING MACHINE MODEL SOFT TRD 2. YEAR 1997 QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALE

ITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1

ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1

ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1

ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1

ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1

ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1

ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 014
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

Learn More

TT-2696 THEN AND FONGS HT DYEING MACHINE, YEAR 2012 TO 2016 ITEM 001 THEN HT DYEING MACHINE ITEM 002 FONGS HT DYEING MACHINE ITEM 003 FONGS HT DYEING MACHINE ITEM 004 SON-TECH BRAND HT DYEING MACHINE Learn More

REFERENCE NUMBER: M-3381

COMPLETE YARN DYEING PLANT FONGS YEAR 2006

 

50 KG CAPACITY FONGS YARN DYEING MACHINE , 2006 YEAR

 

200 KG CAPACITY FONGS YARN DYEING MACHINE , 2006 YEAR

 

300 KG CAPACITY FONGS YARN DYEING MACHINE , 2006 YEAR

 

400 KG CAPACITY FONGS YARN DYEING MACHINE , 2006 YEAR

 

RD-200 FONGS YARN DRYER MACHINE , 2006 YEAR

 

YARN CENTRUFUGAL SQUEEZING MACHINE , 1996 YEAR

 

2 X 60 HEAT SOFT PRO CONE WINDING MACHINE , 2006 YEAR ( TOTAL 120 HEAT )

 

4 X 60 HEAT FINAL PRO CONE WINDING MACHINE , 2006 YEAR ( TOTAL 240 HEAT )

Learn More

TT-2173 KUESTERS COLD DYEING PADDER MACHINES, WORKING WIDTH 1800mm KUESTERS COLD DYEING PADDER MACHINES BRAND: KUESTERS QUANTITY: 2 Learn More

REFERENCE NUMBER: M-5234 (1313LBEMXX12) L KUSTERS DYEING PADDER YEAR 1987 WORKING WIDTH 1800mm KUSTERS DYEING PADDER MODEL 222.11.1800 WORKING WIDTH 1800mm YEAR 1987 TO 2002 QUANTITY AVAILABLE: 1 Learn More

ROPE DYEING MACHINE THEN OF 800 KG. AND 200 KG HIGH TEMPERATURE, FOR THE ROPE DYEING OF WOVEN AND KNITWEAR FABRICS Learn More