Search results for: 'war'

REFERENCE NUMBER: C-2257 SUCKER MÜLLER AND KARL MAYER ROTAL SIZING MACHINE COMPRISING OF WARP BEAM UNWINDING CREEL, YEAR: 1985 MODIFIED 2010 DETAILS: MAKER: SUCKER MÜLLER AND KARL MAYER ROTAL YEAR: 1985 YEAR MODIFIED: 2010 QUANTITY AVAILABLE: 1 Learn More

TT-7001 THIES JET DYEING MACHINES, YEAR 1997 TO 2018 ITEM 001 1. THIES JET DYEING MACHINE MODEL TRD 2. YEAR 2018 QUANTITY: 1 ITEM 002 1. THIES JET DYEING MACHINES MODEL TRD 2. YEAR 2018 QUANTITY: 2 ITEM 003 1. THIES AIR JET DYEING MACHINES MODEL AIRSTREAM 2. YEAR 1999 QUANTITY: 2 ITEM 004 1. THIES LONG PIPE JET DYEING MACHINE MODEL SOFT TRD 2. YEAR 2000 QUANTITY: 1 ITEM 005 1. THIES LONG PIPE JET DYEING MACHINE MODEL SOFT TRD 2. YEAR 1997 QUANTITY: 1 Learn More

TT-6339 COMPLETE PLANT FOR MODERN DENIM DYEING & FINISHING, YEAR 2004 Learn More

REFERENCE NUMBER: T-6794 THIES SAMPLE DYEING MACHINE, YEAR 2012 THIES SAMPLE DYEING MACHINE YEAR 2012 GERMANY ORIGIN 2 SETS X 40 KGS 1 SET X 3 KGS STOPPED ON THE WAREHOUSE QUANTITY: 3 SETS Learn More

REFERENCE NUMBER: T-6920 MCS HIGH TEMPERATURE DYE JIGGER, WIDTH 2000mm, YEAR 1999 BRAND: MCS ITALY YEAR 1999 ROLLER WIDTH 2000mm BOILER DIAMETER 1800mm SUITABLE FOR 400 KG OF FABRIC INFEED AND EXIT BY BATCH WINDER ALL SERVOMOTOR DRIVEN (NO HYDRAULIC) MCS CT 401 CONTROL DEVICE EXPANSION VESSEL (MACHINE IS IN WAREHOUSE) MACHINE IS IN EXCELLENT CONDITION QUANTITY: 1 Learn More

REFERENCE NUMBER: L-5674

COMPLETE DENIM ROPE DYEING LINE FOR 16 ROPES – YEAR 1980 (RECONDITIONED IN YEAR 2003)

 

COMPLETE DENIM ROPE DYEING LINE FOR 16 ROPES

STATUS: RUNNING

 

YEAR 1980, RECONDITIONED 2003

 

QUANTITY: 1 LINE

Learn More

P-4653 NEW FRINGING MACHINE WIDTH 2000mm

MOTORIZED: CA
INSTALLED POWER: 4 KILOWATTS
AIR PRESSURE: MINIMUM 7 BARS
FABRIC SPEED: mt 40/45 1 FEET
WORKING WIDTH: 2000mm
DOFFER PITCH: 7 to 14 OR DIFFERENT ON REQUEST
FOOTBOARD ON THE ENTRY SIDE
DEVICE FOR THE AUTOMATIC THREADING OF THE NEEDLE
AUTOMATIC DEVICE FOR THE TENSIONING OF THE WARP THREADS ON THE REED IN ORDER TO HAVE ALWAYS A PERFECT TENSIONING OF THE FABRICS AND A PERFECT THREADING
DEVICE FOR THE AUTOMATIC LIFTING OF THE UPPER REED GROUP AT THE END OF THE CYCLE
DEVICE FOR THE AUTOMATIC CENTERING OF THE NEEDLE-GUIDE ON THE AUTOMATIC REED
DIMENSIONS: LENGTH 4550mm x WIDE 3300mm x HEIGHT 2670mm
MACHINE EQUIPPED WITH PHOTCELLS AND SAFETY DEVICES CERTIFIED “CE”

QUANTITY: 1

Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2319 LAMPERTI TRICOMBINED BRUSH TIGERING, LUSTRING AND SHEARING LINE LC/SF, WIDTH 2600mm TO 2680mm, YEAR 1980 DETAILS: MADE: LAMPERTI TYPE: LC/SF YEAR: 1980 ROLLER WIDTH: 2600mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-0046 AUTOMATIC ROLL SHRINK PACKING MACHINE MODEL ARPM-240I QUANTITY AVAILABLE: 1 Learn More