Search results for: 'pro+4+pro'

R-6855 STA IMPIANTI MILLENNIUM 3 ROASTING MACHINES

THE ROASTING MACHINES SERIES MILLENNIUM 3 REALIZED BY STA IMPIANTI SRL CONFIRM THEMSELVES CAPABLES OF A WORLD LEADING TRADE MARK IN DESIGN AND PROJECTATION OF INDUSTRIAL AUTOMATIC ROASTING MACHINES FOR COFFEE AND OTHER SIMILAR PRODUCTS. THESE MACHINES, ALLOWING HIGHLY INTEGRATED TECHNOLOGICAL SOLUTIONS, ANTICIPATE THE MOST ADVANCED MARKET DEMANDS.
THANKS TO THE CONSTANT PURSUIT OF HIGH QUALITY STANDARD AND THE COMPANY’S DESIRE TO PROVIDE AT THE SAME TIME A PRODUCT TAILORED TO THE NEEDS OF EACH CLIENT COMPANY, STA IMPIANTI SRL IS ABLE TO OFFER THE BEST SOLUTION IN THE MARKET.

THE ROASTING MACHINES SERIES MILLENNIUM 3 ARE GUARANTEE OF THE HIGHEST STANDARDS OF TECHNOLOGY DECLINED

ON CONCEPS OF HIGH PRODUCTION, MAXIMUM PERFORMANCE, RELIABILITY TOTAL SAFETY WITH LOW NOISE AND ENVIRONMENTAL EMISSIONS.

STANDARD EQUIPMENT:

ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN FOR FULL AUTOMATIC OR PARTIAL DRIVE.
AUTOMATIC ROASTING PROCESS WITH RECORDING – STORAGE OF ROASTING PARAMETERS
SYSTEM CONTROL THROUGH PLC + TOUCH SCREEN
FITTINGS FOR PC
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP WITH DISPLAY ANOMALIES.
PRE-HEATING SYSTEM FOR RAW COFFEE IN STAND-BY
TEMPERATURE COFFEE CONTROL BOTH DURING ROASTING AND COOLING CYCLE.
HOT AIR GENERATOR (STA IMPIANTI‘ PATENTED SYSTEM)
“LOW INERTIA” DEVICE FOR IMMEDIATE STARTING OF PRODUCTION
INDUSTRIAL GAS BURNER TYPE MODULATING OR GASOIL BURNER AT MULTI STAGES OF FLAME ACCORDING APPLICATION.
PROCESS AIR ADMITTANCE CONTROL SYSTEM
FITTINGS FOR CLEAN AIR BY AIR EXCHANGER
CONTROL BOARD COMPLETE WITH LIGHTING DEVICE
SCREENER WITH PNEUMATIC DRAWING
WATER PUMP COMPLETE WITH TANK AND SAFETY BY PASS DEVICE
PRE COOLING SYSTEM OVER ROASTING DRUM
PRE COOLING SYSTEM CONNECTED TO THE COOLER
FIRE PREVENTION SYSTEM LINKED TO THE CYCLONE-CHAFFS COLLECTOR.
CYCLONE-CHAFFS COLLECTOR WITH DRIVEN STAR VALVE
CYCLONE FOR COOLER AND DESTONER
SELF CLEANING COOLING TANK
ADDITIONAL EMERGENCY UNLOADING FOR COOLER
INTEGRATED DESTONER
SERVOCONTROL DEVICE FOR REMOTE ADJUSTMENT OF DESTONER
SOUND PROOFING SYSTEM
GLOBAL SAFETY PROTECTION
OPTIONAL EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
CLEAN AIR BY AIR GENERATOR-EXCHANGING SYSTEM
POST COMBUSTOR TYPE THERMAL BURNER OR CATALYTIC
EXTERNAL DRAWING AIR (QUICK FRESH) SYSTEM
DESTONER WEIGHING CELLS
CHAFFS COMPACTOR.
HEATING ADDUCTION SYSTEM:

PATENTED SYSTEM BY STA IMPIANTI SRL SPECIFICALLY STUDIED FOR ROASTING LINE APPLICATIONS. THIS SYSTEM ALLOWS SHORTER AND HOMOGENEOUS ROASTING TIME:

BY CONVECTION HOT AIR FLOWING THROUGH THE COFFEE IN THE DRUM
BY CONDUCTION DUE TO THE HEATED ROASTING DRUM
BY IRRADIANCE FROM THE GRATE LOCATED BETWEEN THE FLAME AND THE ROASTING DRUM (INFRARED RAYS)
HOT AIR GENERATOR:

THREE ARE THE POSSIBILITIES OF SETTLEMENT TO THE OVER INDICATED SYSTEM:

AIR BY AIR EXCHANGING SYSTEM WITH RECOVERY DEVICE (100% CLEAN AIR)
CONVENTIONAL GENERATOR
HEATING GENERATOR WITH PARTIAL OR TOTAL RECYCLE

Learn More

REFERENCE NUMBER: M-1769 (660VSYKXX5) FROZEN FRENCH FRIES PRODUCTION LINE CAPACITY FROM 100KG PER HOUR TO 1200KG PER HOUR, EVEN LARGER CAPACITY AVAILABLE FRYING MACHINE CAPACITY IS 300 TO 500KG PER HOUR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-7882

TETRA PAK A/3 FLEX 100V ASEPTIC FILLING LINE, 1000ML SLIM, YEAR 2004

 

ASEPTIC FILLING LINE

1000ML SLIM

MAKE: TETRA PAK

MODEL: A/3 FLEX 100V

WITH DIMC (100V AND FIRST GENERATION):

YEAR: 2004

VERSION: 100V

PRODUCTION HOURS: 43,156

CAP TYPE: LIGHT CAP

 

CONDITION: USED

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-7783

CONSTANTA TEEPACK STRING AND TAG TEABAGGING MACHINES

 

TEABAGGING MACHINES

TYPE: STRING AND TAG

MAKE: TEEPACK

MODEL: CONSTANTA

DOUBLE CHAMBER FILTER BAG WITH NATURAL FILTER PAPER (NOT HEAT-SEALABLE), WITH THREAD/TAG, CLOSED BY

 

PREFER TO BE SOLD AS ONE GROUP OF MACHINES

 

QUANTITY: 6

Learn More

R-3266 SIROCCO SR 35 ROASTER - 35 KILOS

SEVEN “MACHINES” IN ONE BODY. THAT SAVES YOU PRECIOUS SPACE, EXPENSIVE ENERGY, REDUCES WASTE AND TOTALLY QUIET. WHEN COMPARING, REMEMBER THAT YOU WILL NEVER NEED TO BUY OXIDIZER, AND A AFTERBURNER, SINCE IT IS ALL INCLUDED.
AFTERBURNER
INCINERATOR
CHAFF COLLECTOR
MANUALLY & PROGRAMMED PROFILE CONTROLLER
VARIABLE AIR SPEED CONTROLLER
SEPARATE HEAT CONTROLLER
GAS MODULATING CONTROLLER

COMPLETE ROASTING PROCESS WITH ALL FEATURES BUILT INSIDE ONE MACHINE
GENTLE CAST IRON ROASTING ENVIRONMENT
MECHANICALLY FLUIDIZED BEAN MOVEMENT
INTEGRATED AFTERBURNER AND INCINERATOR
TO ELIMINATE SMOKE, ODOR AND CHAFF
GRAPHICAL TOUCH SCREEN WITH PROFILE MEMORY
OVERSIZED INSPECTION PORTS
STIRFLEX COOLING TRAY
QUICK-RELEASE COOLER WITH REMOVABLE SCREEN
MAINTENANCE FREE SEALED ROASTING DRUM
BUILT-IN STONER BOOT
LOW PROFILE INFEED HOPPER
WEB-ENABLED FOR FACTORY ASSISTANCE AND DIAGNOSTICS
AUTOMATIC OR SEMI-AUTOMATIC OPERATION FOR CONSISTENT BATCHES
CLEAR PROCESS INFORMATION INCLUDES BEAN TEMP., ELAPSED TIME,
TEMPERATURE CHANGE AND STATUS

SPECIFICATIONS:
MODEL #: SR 35
BATCH CAPACITY: 35 KGS
DIMENSIONS: 35" W X 112" L X 84" H
COOLER DIAMETER: 40
HEAT SPECIFICATIONS: GAS & 380K-760K
WEIGHT: 3600 LBS

QUANTITY: 1

Learn More

P-5079 COMMERCIAL JOPER CAST IRON CRM-30 ROASTER 30 KILOS

WHAT WE HAVE HERE IS A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING CONTACT CLEARANCES WITH THE MACHINE - JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS.

DATA INFORMATION:
BATCH CAPACITY: 30 KG / 66 LBS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 120 KG / 265 LBS
ROASTING TIME: 12-18 MIN (4 BATCHES AN HOUR)
EXHAUST AIR TREATMENT: OPTIONAL
COOLING CYCLONE: OPTIONAL
PRE-COOLING WITH WATER IN DRUM: OPTIONAL
COOLING TIME: 3-4 MIN
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
BURNER POWER: 110 KW / 375000 BTU
BURNERS MANUFACTURER: RIELLO
OPERATION TYPE BURNER: BS2D-2 STAGE
FUEL TYPE: PROPANE/NAUTRAL GAS/DIESEL
SIDE OF OPERATION: LEFT
POWER REQUIREMENTS: 20 AMP
VOLTAGE/FREQUENCY/PHASES: 400+N-230 V / 50-60 HZ / 3 PH
9 AMP. . . 3 PHASE 50/60 HZ PREFERRED, YOUR CHOICE OF 220/440 - SINGLE PHASE AVAILABLE AT SPECIAL REQUEST
(NOTE ON 3 PHASE. . . NOT ONLY IS IT LESS EXPENSIVE TO OPERATE, BUT IT RUNS MORE QUIETLY THAN SINGLE PHASE WHENEVER OR WHEREVER IT IS USED. KEEP THIS IN MIND FOR ANY MACHINERY.)
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 250MM / 9,8 INCH
Ø EXHAUST CHIMNEY (COOLER): 250MM / 9,8 INCH
Ø HOPPER ROAST CHIMNEY: 150MM / 5,9 INCH
ROASTER WEIGHT WITH CYCLONE: 1050 KG / 2310 LBS
COOLER WEIGHT: 300 KG / 660 LBS
ROASTER FAN MOTOR: 1, 5 HP
COOLER FAN: 4 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0, 75 HP
BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

P-5046 TRABATTONI ROASTER 10 KILOS

TRABATTONI
ROASTER
10 KILOS
BEST MACHINE FOR WHOLESALE/RETAIL WITH A "SALES" APPEAL! THE COOLING BIN ON THE FRONT IS DOUBLE SIZED TO PROVIDE ROOM FOR BOTH MIXING AND BLENDING. THIS IS A RUGGED SOLID TRADITIONAL APPROACH TO ROASTING WITH AN IMAGE. BUILT FROM CAST IRON BASE AND FOUNDATION - THIS DOUBLE WALL DRUM ROASTER CAN BE BUILT IN GAS, PROPANE OR EVEN WOOD FIRED. IF WOOD FIRED, THEN THE ELECTRICAL PANEL WILL BE MOVED. THE CHAFF COLLECTOR CONNECTS IN ANY POSITIONS TO THE REAR OF THE MACHINE. COMES IN RED COLOR UNLESS OTHERWISE SPECIFIED. CUSTOMIZED DESTONER SIZE OPTION AS WELL AS THE AIR
SUCTION ADJUSTMENTS. CRATING INCLUDED IN THE PRICE.

FEATURES:
DIMENSION: 42" WIDE X 69" DEEP X 67"TALL & 24" CHAFF NET WEIGHT: 1,450 POUNDS EXHAUST TUBE TO OUTSIDE: 6" COOLING TUBE: 6" ELECTRIC POWER REQUIRED: 1.1 KW HEATING: 14,000 KCAL/H WITH GAS, PROPANE, OIL, OR WOOD FIRED WOOD FIRED UNITS AVAILABLE - PLEASE CALL FOR PRICE. STAINLESS STEEL CHAFF COLLECTOR IN REAR- ALLOW 24" SPACE

QUANTITY: 1

Learn More

REFERENCE NUMBER: H-1150

WERNER & pfleiderer wide hard and semi sweet dough multipurpose biscuit/cookie production line 1200mm

 

complete with biscuit stacking and full wrapping station

 

product DETAILS

 

ITEM      PRODUCT NAME              DIMENSIONS     WEIGHT               PPM

1              TEA BISCUIT                       60Х45Х5.2           90 GRAM             127

2              TEA BISCUIT                       60Х50Х6.3           180 GRAM           80

3              TEA BISCUIT                       60Х50Х5.2           165 GRAM           90

4              CRACKER ROUND             40 Х5MM             42 GRAM             140

5              CRACKER TAIB                   65Х50Х6.5           80 GRAM             130

6              CREAM SANDWICH         46Х34Х12             90 GRAM             70

7              HONEY GLUCOSE             48Х38Х6.5           50 GRAM             160

8              MINI SANDWICH Rnd.  27Х5                      35 GRAM             45

9              MINI CRACKER ROUND 28Х5MM              35 GRAM             45

 

 

MACHINE DETAILS

 

M/C                                       TYPE

1              WATER METER 

2              MIXER                                   TYPE Z K 900

3              DOUGH TROLLY

4              DOUGH FEEDING SYSTEM           

5              LAMINATOR                       TYPE LU 800 E

6              ROTARY CUTTING            TYPE RTA-G 1000

7              MOULDING MACHINE   TYPE RTA-G 1000

8              CUTTING ROLLER             TYPE 1000

9              MOULDING UNIT             TYPE 1000

10           EGG WSH APPLICATOR  TYPE DSV 1000

 

 

 

 

MACHINE DETAILS (CONT.)

 

M/C                                                       TYPE

11           TOPPING APPLICATOR                  TYPE 1000

12           WIRE MESH BAND OVEN              SN 1000/60M

13           ARCAL SPRAY UNIT                         TYPE 1000

14           COOLING SYSTEM CONVEYOR   

15           CONVEYOR # 1                                  CAVANNA

16           CONVEYOR #2                                   CAVANNA

17           BY PASS CONVEYOR                        CAVANNA

18           SLIDE CONVEYOR                             CAVANNA

19           TRACK CONVEYOR                           CAVANNA

20           PHASING CONVEYOR                     CAVANNA

21           ACCUMULATION CONVEYOR     CAVANNA

22           VIBRATING UNIT                              CAVANNA

  AND CONVEYOR BELT                 

23           SLUG BISCUIT FEEDER                    CAVANNA

24           PENNY STACKET                               CAVANNA

25           TRANSFERRING GROUP                                CAVANNA

26           CAVANNA PACKGAIN MACHINE               ZERO5 NKZ

27           SINLON PACKAGE MACHINE       SL500

28           COOKIES CAPPER                             MODEL 200 MK V1-3 METRIC

 

LINE DIMENSIONS:

 

TOTAL LENGTH OF LINE: 192 meters

LAMINATOR CONVEYOR: 20 meters

 

OVEN:

 

TOTAL LENGTH 75 meters

WORKING WIDTH: 1200mm

TOTAL WIDTH including: OVEN BODY: 2140mm

 

 

LINE DIMENSIONS:

 

COOLING CONVEYOR

LENGTH: 68 Meters

WIDTH of BELT: 1090mm

FRAME: 130mm

 

CAVANNA WRAPING AREA

LENGTH: 20 meters

 

CAVANNA WRAPPING MACHINE 05 NKZ

LENGTH: 9 Meters

Learn More

Z-1678 CHOCOLATE ENROBING MACHINE POWER (KW): 12.06 WEIGHT: 2000KG MACHINE SIZE: 14200X950X1500mm QUANTITY: 1 Learn More

Z-1676 CHOCOLATE MOULDING LINE MODEL: Z275 CAPACITY: 10 TO 30 POWER: 7.47 MOULD: 200 WEIGHT: 500 MACHINE SIZE: 4000X520X1500 QUANTITY: 1 Learn More