Search results for: 'reference number -v-2'

REFERENCE NUMBER: P-1256 HUSKY GL300 P100/110 E100 PET PREFORM INJECTION MOULDING MACHINE YEAR 2000 2000 WORKING HOURS HUSKY GL300 P100/110 E100 PET PREFORM INJECTION MOULDING MACHINE YEAR: 2000 ELECTRICITY POWER SUPPLY: 180 VOLTS per 60 HERTZ HUSKY 48-CAVITY PREFORMS MOULD FOR ALCOA 1716-36GM PREFORMS GDXL 48-CAVITY PREFORMS MOULD (COLD HALF) FOR PCO 1810 23.5 GRAMS PREFORMS COLOR MATRIX COLOR MIXER PIOVAN DS 428 RESIN DRYER PIOVAN RESIN HOPPER T4000LX PIOVAN RPA 1500 MOULD DEHUMIDIFIER WORKING HOURS: 2000 HOURS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5272 (1313KWMDXX12) L RIETER C-60 CARD YEAR 2001 MODEL C-60 VERSION V-3 MAKE RIETER YEAR 2001 QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-5273 (1313WHRPXX12) L RIETER C-60 CARD YEAR 2003 MODEL C-60 VERSION V-3 MAKE RIETER YEAR 2003 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

 

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.

Learn More

REFERENCE NUMBER: P-2121 RIETER D30 DRAW FRAMES YEAR 2001 RIETER TYPE: D30 DRAW FRAMES YEAR: 2001 SUITABLE FOR COTTON, POLYESTER OR MIXED UP TO 80mm SPEED 250 to 1000 M/MIN DRAFTING 3 OVER 3 PRESSION BAR REGULATION – ELECTRONIC INTEGRATED DUST ASPIRATION AUTOMATIC CAN CHANGER 18 INCHES x 42 INCHES CAN SIZE CREEL WITH SENSORS RIETER QUALITY MONITORS VOLTAGE: 220 VOLTS, 60 HERTZ 11.6 KILOWATTS POWER PNEUMATIC DRAFTING SYSTEM RSB D30 YEAR 2001 CARDS: C 1/2 – 1976 - COTTON C 1/3 – 1984 – POLYESTER C 1/3 – 1982 – POLYESTER ADDITIONAL DRAW FRAMES: 2 DO/2 YEAR: 1985 QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: C-2298 BRUCKNER STENTER LINE, WIDTH 3600mm, YEAR 2000, 8 CHAMBERS, PIN CHAIN DETAILS: BRUCKNER STENTER LINE YEAR: 2000 WIDTH: 3600mm BIANCO ENTRY MODEL: LINEA ENTRATA RAM TRACTION UNIT WITH COMPENSATOR J-BOX ACCUMULATOR WITH TRACTION ROLLER DOGAL CENTERING UNIT WITH MOTORIZED SPANDERS ROLLERS FOULARD 2 ROLLERS WITH PNEUMATIC PRESSURE VDTEX WEFTSTRAIGHTENER WITH 8 HEADS E+L DIGITAL INTRODUCTION AUTOMATIC OVERFEED 6 METERS ENTRY HORIZONTAL PIN CHAIN 8 CHAMBERS GAS HEATED WITH BRÜCKNER ECLIPSE BURNERS AUTOMATIC REGULATION OF CHAIN WIDTH COOLING UNIT MAHLO HUMIDITY CONTROL EXIT BY BIANCO YEAR: 2000 MODEL: LINEA USCITA RAM ACCUMULATOR UNIT 60 METERS BIG BATCHER FOR A-FRAME WITH DOUBLE POSITION AC INVERTER CONTROLLED TOTAL LENGTH 58 METERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-8521

RIETER C60 CARDS YEAR 2006-2008

 

RIETER C60 CARDS

YEAR: 2006-2008

YEAR 2006 TO 2008

COILER SIZE 40 x 46 INCH

SINGLE LICKERIN, NEEDLE TYPE

NO SB MODULE

IGS ON ALL CYLINDERS

Q-PACK FIXED IN 3 CARDS AND IN STOCK FOR 4 CARDS

MACHINES COME WITH ALL AVAILABLE PARTS AND GRINDING MACHINE

IN EXCELLENT CONDITION IN AN EXPORT ORIENTED SPINNING MILL

HAS Q PACK VERSION 9 NEW TYPE

 

QUANTITY: 5

Learn More

REFERENCE NUMBER: C-1222 SAVIO AUTOMATIC CONE WINDER, MODEL ORION E, YEAR 2005, WITH WAXING DEVICE, N.44 POSITIONS – YEAR 2005 DETAILS: AUTOMATIC CONE WINDER SAVIO ORION E N.44 HEADS YEAR OF CONSTRUCTION 2005 AUTOMATIC LOADER OF THE SPOOLS AUTOMATIC TOP SEARCH MAIN UNIT SX LOADED DX DELIVERY 6"(152 mm) CONICITY 4°20' 2 TURNS DRUM DIAMETER 94 mm VARIABLE STEP SPLICER MESDAN MOD.690 U ELECTRONIC CLEARERS LOEPFE ZENIT FC WITH INTERCEPTING FOREIGN FIBERS WAXING DEVICE N.1 TROLLEY FOR AUTOMATIC DOFFING N.1 CONES RESERVE SINGLE BASKET LIGHTING ON THE MACHINE TROLLEY BLOWER MAGITEX WITH DRAIN ON THE MAIN UNIT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3608 (880195BAG7R) K BRUCKNER STENTER YEAR 1998 WIDTH 2000mm HOT OIL HEATED -6 ZONES -HORIZONTAL CHAIN -PIN ONLY BRAND BRUCKNER YEAR 1998 WORKING WIDTH 2000mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3513 (880JJHGHH7) L VOLKMANN VTS-05-0-C CABLERS & TWISTERS YEAR 1999-2008 – 120 SPINDLES VOLKMANN VTS-05-0-C 1999 CABLER 120 SPINDLES VOLKMANN VTS-05-0-C 2000 CABLER 120 SPINDLES VOLKMANN VTS-05-0-C 2007 CABLER 120 SPINDLES VOLKMANN VTS-05-0-C 2008 CABLER 120 SPINDLES VOLKMANN VTS-05-0 2003 TWISTER 120 SPINDLES VOLKMANN VTS-05-0-C 2000 CABLER 120 SPINDLES VOLKMANN VTS-05-0 2002 TWISTER 120 SPINDLES VOLKMANN VTS-05-0 2002 TWISTER 120 SPINDLES QUANTITY AVAILABLE: 8 Learn More