Search results for: 'compo''

ISOLATION GOWNS
SEAM STRIP AND STERILIZED
BY ETHYLENE OXIDE GAS
CAN BE USED IN ICU
NON WOVEN MATERIAL
BREATHABLE COMPOSITE FILM
PACKED WITH PLASTIC BAG 1 PIECE
1 CARTON 30 PIECES
CARTON SIZE IS 520 X 420 X 320mm
CAN BE LOADED 11200 PIECES PER 20’FT

ISOLATION GOWNS
WITHOUT SEAM STRIP AND NOT STERILIZATION
PP AND PE
NOT STERILE
WATERPROOF
NON WOVEN MATERIAL
BREATHABLE COMPOSITE FILM
PACKED WITH PLASTIC BAG 1 PIECE
1 CARTON 30 PIECES
CARTON SIZE IS 520 X 420 X 320mm
CAN BE LOADED 11200 PIECES PER 20’FT

MAINLY USED FOR VISUAL FIELD TESTING OF MASKS AND RESPIRATORS, WHICH IS USEFUL FOR MASK AND RESPIRATOR MANUFACTURERS, QUALITY SUPERVISORS, SCIENTIFIC RESEARCH, AND FOR TESTING PRIOR TO SELLING MASKS.

FEATURES:
1. THE EQUIPMENT IS COMPOSED OF A SEMI-ARC BOW, RECORDING DEVICE, SEAT FRAME AND TEST HEAD DIE.
2. SEMI-ARC BOW: THE RADIUS IS 300 TO 340 mm
CAN BE ROTATED AROUND THE HORIZONTAL RADIUS PLANE PASSING THROUGH THE POINT 0°, AND A SCALE EXTENDING TO THE 90° ARC BOW EVERY 5° FROM 0° ON BOTH SIDES, EQUIPPED WITH SLIDING WHITE VISUAL STANDARD.
3. RECORDING DEVICE: THE RECORDING NEEDLE IS CONNECTED WITH THE VISUAL STANDARD THROUGH COMPONENTS SUCH AS AXLE WHEEL, AND THE DIRECTION AND ANGLE OF THE VISUAL STANDARD ARE RECORDED ON THE VISUAL FIELD DRAWING CORRESPONDINGLY.
4. SEAT FRAME: USED TO SUPPORT SEMI-CIRCULAR ARC BOW AND FIXED RECORDING DEVICE.
5. TEST THE HEAD MOLD: A STANDARD HEAD MOLD, THE TWO EYE HOLES OF THE HEAD MOLD ARE EQUIPPED WITH SMALL LIGHT BULBS, THE POSITION OF THE BULB AND THE POSITION OF THE HEAD MOLD ARE ACCORDING TO THE REQUIREMENTS OF GB 2890. THE TEST HEAD DIE MUST BE INSTALLED ON THE WORKBENCH IN SUCH A WAY THAT THE LEFT AND RIGHT EYES ARE PLACED AT THE CENTER OF THE SEMICIRCULAR ARCH AND THE "0" POINT IS DIRECTLY SEEN.

MAIN INDICATORS
1. SEMI-CIRCULAR ARC RADIUS: 335mm.
2. LEFT AND RIGHT FIELD OF VIEW: ≤120°.
3. BULB DISTANCE: THE VERTEX OF THE BULB IS CONNECTED AFTER THE TWO EYE POINTS (7±0.5).
APPLICABLE STANDARDS: GB/T 32610-2016, GB 2626-2019, GB2890-2009

3 LAYER MASKS CONSTRUCTED OF NONWOVEN AND MELTBLOWN FABRIC
MASK DIMENSIONS: 175 x 95mm (ADULT) & 145 x 90mm (CHILD)

---COMPOSED OF TWO MACHINES, AS BELOW

1) AUTOMATIC MASK LAYER MAKING AND CUTTING MACHINE
CAPACITY: 200 TO 300 PIECES PER MINUTE
INCLUDES
• MATERIAL FEEDING FRAME
• MACHINE FRAME
• ALUMINUM NOSE STRIP INSERTION
• ULTRASONIC WELDING
• CONVEYOR
DIMENSIONS: 4600 x 500 x 2100mm
WEIGHT: 300 KGS
POWER: 220 VOLTS, 50 Hz (OR AS PER CUSTOMER)

2) MANUAL EAR BAND WELDING MACHINE
CAPACITY: 30 TO 40 PIECES PER MINUTE
INCLUDES
• WORKBENCH
• LIGHT
• AIR CYLINDER
• ULTRASONIC GENERATOR
• CONTROL SYSTEM
DIMENSIONS: 800 x 500 x 1000mm
WEIGHT: 43 KGS
POWER: 380 VOLTS, 50 Hz (OR AS PER CUSTOMER)

WARRANTY: 1 YEAR FOR MAJOR COMPONENTS, LIFELONG SERVICE FOR THE USER

QUANTITY: 1 COMPLETE SEMI-AUTOMATIC LINE

EACH LINE WITH
PRE-GRINDER
DENSIFIER, MODEL HV70
REGRINDING
COOLING
DOFFING

THERE IS A PULVERIZER AT THE END OF ONE OF THE LINES THAT IS AVAILABLE

HERBOLD RECENTLY INSPECTED AND INFORMED ALL BIG COMPONENTS ARE IN GOOD CONDITION, SOME SMALLER SPARE PARTS ARE ADVISED

QUANTITY: 2 LINES

REFERENCE NUMBER: J-2184
HORIZONTAL CONVEYOR, 90 METERS LONG, 2400mm WIDE - NEW

MOTORIZED BELT-DRIVEN CONVEYOR
CONVEYING LENGTH: 90 METERS
CONVEYING WIDTH: 2400mm
CONVEYOR HEIGHT: 800mm
CONVEYING SPEED: 0 TO APPROXIMATELY 40 METERS PER MINUTE
BELTS: 200mm WIDTH x 6 PIECES, EACH 90 METERS LONG
DRIVING ROLL DIAMETER: 157mm
DRIVEN ROLL DIAMETER: 75mm
CENTER TO CENTER SPACING OF 2 ROLLS: 500mm
2 MOTORS, EACH 5.5 KW (CONVEYOR IS COMPOSED OF A TOTAL OF 4 SECTIONS. ONE 5.5 KW MOTOR DRIVES TWO SECTIONS)
1 INVERTER, 11 KW (DRIVES BOTH OF THE 5.5 KW MOTORS)
VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz

LEAD TIME: 45 WEEKDAYS FROM RECEIPT OF DEPOSIT

QUANTITY: 1

FOR FILLING DOWN FEATHER PILLOWS
FILLING RANGE: 1 TO 120 GRAMS (70% FEATHER & 30% DOWN)
WEIGHING SYSTEM: 4 SETS
POWER: 4.5 KW
VOLTAGE: 220 / 380 V, 3-PHASE
AIR PRESSURE: 0.5 TO 0.7 MPA
ACCURATE WEIGHING RESULTS WITH TOLERANCE OF ONLY 1 GRAM
WORKING TABLE DIMENSIONS: 1200 x 2400mm (FOR CUSTOMERS FILLING PILLOWS AND QUILTS)
WORKING TABLE DIMENSIONS FOR PILLOWS ONLY: 1200 x 1200mm (EASIER TO FIT IN A 20 FOOT CONTAINER)
OPERATION CAN BE HANDLED BY ONLY 1 EMPLOYEE
INCLUDES ONE AUTOMATIC FILLING TABLE WITH FOOT SWITCH AND CLAMP DEVICE
THE WORKER STEPS ON THE FOOT SWITCH AND THE CLAMP DEVICE WILL RUN TO CLAMP THE PILLOW BAG
THE FILLING PROCESS AUTOMATICALLY STARTS TO FILL THE PILLOW AND AFTER FINISHING THE CLAMP DEVICE WILL RESET
DURING THIS PERIOD, THE WORKER MAY SEAL THE PILLOW WITH SEWING MACHINE
FOUR HOPPER SYSTEM FOR CONSTANT SUPPLY
ONE KEY FOR CHARGE AND RECHARGE REDUCES WASTED TIME
HIGH-QUALITY, RELIABLE ELECTRICAL COMPONENTS
PREPROGRAMMABLE FOR UP TO 50 GROUPS OF RECIPES WITH EACH RECIPE CONTAINING UP TO 60 SETS OF DIFFERENT FILLING PARTS FOR THE SAME PRODUCTION
FULLY ENCLOSED DESIGN TO KEEP ENVIRONMENT CLEAN AND REDUCE MATERIAL WASTE
AUTOMATIC, ACCURATE WEIGHING WITH LOAD CELL TO ENSURE PRODUCTION QUALITY
CE CERTIFICATE INCLUDED
FLOORSPACE 4000mm LONG X 3000mm WIDE X 2500mm HIGH
TABLE FOR PILLOWS IS 1200 X 1200mm

QUANTITY: 1

REDUCES VOLUME FOR STORAGE AND TRANSPORTATION
USES COMPRESSED AIR AND PLASTIC COMPOSITE FILM BAGS FOR PACKAGING ITEMS AFTER COMPRESSION
EQUIPPED WITH AUTOMATIC TRANSMISSION TO COMPRESS AND FILM ITEMS UNINTERRUPTED
STANDARD MODEL EQUIPPED WITH ONE WORKSTATION WITH SINGLE SEAL (OPTIONAL ONE WORKSTATION WITH DOUBLE SEALS)
PLC TOUCH SCREEN OPERATION, USER FRIENDLY INTERFACE
CONSTANT TEMPERATURE CONTROL FUNCTION TO PREVENT BAG BURNS

VOLTAGE AND POWER: 220 V SINGLE-PHASE, 0.5 KW, 50 Hz
AIR PRESSURE: 0.4 – 0.8 MPA
PACKING CAPACITY: : 8 TO 12 ITEMS PER MINUTE
PRESS BOARD SIZE: LENGTH 700mm x WIDTH 900mm
MAXIMUM COMPRESSION THICKNESS: 500mm (AIR CYLINDER TRAVEL)
SEAL LENGTH: 880mm x 10mm
OVERALL DIMENSIONS: LENGTH 3390mm x WIDTH 940mm x HEIGHT 2010mm
POWER: 1.5 KW
NET WEIGHT: 350 KG
GROSS WEIGHT: 400 KG

QUANTITY: 1

REFERENCE NUMBER: P-7661 
KARL MAYER BENNINGER 
TYPE: BM-E 2600/1000 
MODEL; SIZE-O-MATIC 
YEAR: 2011 
QUANTITY: 1 

REFERENCENUMBER: M-7517
GAS SINGEING MACHINE
MAKE: OSTHOFF
YEAR: 1998
QUANTITY: 1