Search results for: 'air+co'

REFERENCE NUMBER: T-6552

MASK AIR TIGHTNESS TESTER

MASK AIR TIGHTNESS TESTER

HOW TO CHOOSE A HIGH-QUALITY MASK NOT ONLY DEPENDS ON THE FILTERING EFFICIENCY OF THEMASK, BUT ALSO TO CONFIRM WHETHER THE MASK IS COMPLETELY IN CONTACT WITH THE FACE, OTHERWISE AEROSOL PARTICLES SUCH AS GERMS THAT HAVE NOT BEEN FILTERED BY THE MASK WILL BE INHALED FROM THE INADEQUATE ADHESION. THEREFORE, IT IS VERY IMPORTANT TO CHECK THE WEARING STATUS OF THE MASK. THE EUROPEAN AND AMERICAN COUNTRIES HAVE LISTED THE APPLICATION TEST OF THE MASK AS A STRONG INSPECTION ITEM.

FOR EXAMPLE, THE N95 MASK IS ONE OF 9 TYPES OF PARTICULATE PROTECTIVE MASKS CERTIFIED BY NIOSH (NATIONAL INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH). "N" INDICATES OIL RESISTANCE."95" INDICATES THAT THE PARTICLE CONCENTRATION IN THE MASK IS MORE THAN 95% LOWER THAN THAT OF THE PARTICLES OUTSIDE THE MASK WHEN EXPOSED TO THE SPECIFIED NUMBER OF SPECIAL TEST PARTICLES. N95 IS NOT A SPECIFIC PRODUCT NAME, AS LONG AS IT MEETS THE N95 STANDARD AND PASSES THE NIOSH REVIEW, IT CAN BE CALLED "N95 MASK".

N95 TYPE MASKS, IN ADDITION TO THE FILTERING EFFICIENCY OF THE MASKS, THE CLOSENESS OF THE MASKS TO THE FACE IS ONE OF THE IMPORTANT FACTORS THAT DETERMINE THE EFFECTIVENESS OF THE USE OF THE MASKS. THE SUITABILITY OF DIFFERENT TYPES OF MASKS FOR THE HUMAN FACE VARIES GREATLY.

THEREFORE, BEFORE USING A MASK, THE SUITABILITY OF THE MASK SHOULD BE CHECKED FIRST. DURING THETIGHTNESS TEST OF THE WEARER'S FACE, ENSURE THAT AIR CAN PASS IN AND OUT THROUGH THE MASK WHEN IT IS CLOSE TO THE EDGE OF THE FACE. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTION PERFORMANCE. IT CONFORMS TO THE CHINESE RESPIRATOR STANDARD GB2626-2019 STANDARD, OSHA / CSA STANDARD AND CHINA GENERAL ADMINISTRATION OF QUALITY SUPERVISION, INSPECTION AND QUARANTINE "GB 19083-2010 TECHNICAL REQUIREMENTS FOR MEDICAL PROTECTIVE MASKS" JOINTLY ISSUED BY THE CHINA NATIONAL STANDARDIZATION ADMINISTRATION COMMITTEE.

ADHESION (SUITABILITY TEST): THE MASK DESIGN SHOULD PROVIDE GOOD ADHESION. THE OVERALL FIT FACTOR OF THE MASK SHOULD NOT BE LESS THAN 100. THIS TEST THE REQUIREMENTS WERE FORMALLY IMPLEMENTED ON AUGUST 1, 2011.

• Air permeable
The mesh openings on two sides and the porous structure allow free air flow and vapor emission from all six sides, effectively inhibiting the growth of molds, bacteria and mites and thus preventing skin itches.

• Stress-relieving and body-fitting
The hardness is moderate to reduce the body stress so that human body can fully relax without feeling any compression, avoiding blocking blood flow. There are 40 supporting points per square centimeter, providing meticulous support and fitting the material to the natural curve of human body.

• Easy-to-wash and fast-dry
The material is made from functional fiber, which neither absorbs moisture nor easily reacts chemically with oil and dirt. Water stays no more than one second on the material, while sweat, dirt, and dust can be washed away easily. Therefore, the surface can be cleaned with minimum effort, preventing the growth of mites and bacteria.

• Eco-friendly and non-toxic 
The pure fabric can be fully recycled upon disposal. The combustion products of sponge are cyanides, which are highly toxic; on the contrary, the products of complete combustion of 3D spacer material are water and carbon dioxide, which are non-toxic and totally safe.

• Rollable and portable. 
With superior rollability, it can be easily carried into and out of an elevator, taken to outdoor activities, or stores easily when the seasons change.

CONSTRUCTED OF 100% POLYESTER
FEATURES: AIR-PERMEABLE, WATER-PERMEABLE, ECO-FRIENDLY, NON-TOXIC, 100% RECYCLED, ANTI-STATIC, ANTI-MITE, ELASTIC, FLAME-RETARDANT, ETC.
NET “X” STRUCTURE
FOR UPHOLSTERY, MATTRESS TOPPERS, MATS, SEAT CUSHIONS, ETC. 

NO# NAME LENGTH x WIDTH DIMENSIONS APPROX. INCHES THICKNESS
1 CUSHION 450x450mm 17.7 x 17.7 8 INCHES
2 BABY BED 600x1200mm 23.6 x 47.2 8 INCHES
3 STUDENT BED 1000x2000mm 39.3 x 78.7 8 INCHES
4 1.2 METER BED 1200x2000mm 47.2 x 78.7 8 INCHES
5 1.5 METER BED 1500x2000mm 59 x 78.7 8 INCHES
6 1.8 METER BED 1800x2000mm 70.8 x 78.7 8 INCHES
7 QUEEN BED 1524 x 2032mm 60 x 80 8 INCHES

NON-INVASIVE VENTILATOR
CERTIFICATE: CE
MEDICAL VENTILATOR
TECHNICAL PARAMETERS OF DOUBLE LEVEL VENTILATOR
VENTILATOR TYPE: ELECTRIC CONTROL
SCOPE OF APPLICATION: TREATMENT AND TITRATION OF SLEEP APNEA HYPOPNEA SYNDROME, SEVERE SNORING, AND RESPIRATORY INSUFFICIENCY.
DISPLAY INTERFACE: 3.5-INCH LED SCREEN, CHINESE OPERATING SYSTEM
*VENTILATION MODE: CPAP, S, S/T, T
PRESSURE RANGE:
PRESSURE RANGE: 4-30CMH2O (±0.5CMH2O)
PRESSURE ACCURACY: + 0.5CMH2O
PARAMETER SETTING:
DELAYED BOOST: 0-60MIN, SET THE DIVISION INTERVAL 5MIN
INITIAL PRESSURE: 4CMH2O TREATMENT PRESSURE / RESPIRATORY PRESSURE SETTING
THERAPEUTIC PRESSURE: 4-20CMH2O (IN CPAP MODE)
TARGET TIDAL VOLUME: 150ML - 1500ML, ON/ OFF
MAXIMUM SUCTION PRESSURE: 4-30CMH2O, (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
MINIMUM SUCTION PRESSURE: 4-30CMH2O (NOT HIGHER THAN THE SUCTION PRESSURE), (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
INSPIRATORY PHASE PRESSURE: 4-30CMH2O
EXPIRATORY PRESSURE: 4-30CMH2O
EXPIRATORY DECOMPRESSION: PATIENT, OFF, 1-3, THREE ADJUSTABLE
MANUAL VOLTAGE REGULATION: 0-2 GEAR, 0-2CMH2O (ONLY AVAILABLE IN CPAP MODE)
INSPIRATORY SENSITIVITY: 1-8 STALLS
EXPIRATORY SENSITIVITY: 1-8 STALLS
RESPIRATORY FREQUENCY: 3-40 TIMES / MIN
INSPIRATORY TIME: 0.3-3.0S
BACKUP RATE: ON / OFF, DEFAULT 10
PRESSURE RISE TIME: 1-4 STALLS
HUMIDIFIER: 1-5 ADJUSTABLE IN 5 GEARS
*TITRATION FUNCTION: SUPPORT MANUAL AND AUTOMATIC PRESSURE TITRATION, BUILT-IN REMOTE WIRELESS COMMUNICATION MODULE, COMPLETE THE RANDOM SWITCHING OF SINGLE AND DOUBLE LEVEL MODES IN THE TITRATION PROCESS, AND CONTROL MORE THAN 11 VENTILATOR PARAMETERS AT THE SAME TIME.
AUXILIARY FUNCTION: AUTOMATIC AIR LEAKAGE COMPENSATION, AUTOMATIC STARTUP, AUTOMATIC SHUTDOWN, DELAYED SHUTDOWN, SCREEN BACKLIGHT ADJUSTMENT
MONITORING PARAMETERS: PRESSURE, TIDAL VOLUME, RESPIRATORY RATE, MINUTE VENTILATION VOLUME, AIR LEAKAGE VOLUME, INSPIRATORY TIME, BLOOD OXYGEN SATURATION
WAVY CURVE: PRESSURE TIME WAVEFORM, FLOW RATE TIME WAVEFORM
ALARM PROMPT: PIPELINE AND MASK FALLING OFF, AIR LEAKAGE PROMPT, POWER INTERRUPTION, TREATMENT MACHINE FAILURE, HUMIDIFIER FAILURE, LOW VOLTAGE, HIGH RESPIRATORY RATE, LOW RESPIRATORY RATE, LOW MINUTE VENTILATION VOLUME, LOW BLOOD OXYGEN, REPLACEMENT OF FILTER COTTON, FULL SD CARD, RE INSERTION OF SD CARD
*DATA MANAGEMENT:
NETWORK DATA: BMC + RESPIRATORY HEALTH MANAGEMENT CLOUD PLATFORM
SD CARD DATA: RESART NPAP DATA ANALYSIS SOFTWARE
PARTS:
SD CARD: STANDARD
SD CARD SLOT: STANDARD
PIPING: 9 22MM, 1.8M LONG
FACE SHIELD: F2 NOSE MASK AS STANDARD
NOISE: LESS THAN 30DB
ENVIRONMENT CONDITION:
TEMPERATURE:
(WHEN USED) 5 -35 C
(DURING TRANSPORTATION AND STORAGE) -20 C -55 C
ATMOSPHERIC PRESSURE:
(WHEN USED) 760-1060HPA
(DURING TRANSPORTATION AND STORAGE) 760-1060HPA
WORKING HOURS: MORE THAN 8 HOURS
POWER SUPPLY REQUIREMENTS:
AC VOLTAGE: 100-240V
FREQUENCY: 50HZ/60HZ
INPUT POWER: LESS THAN 2A
WATERPROOF LEVEL: IP22 - DRIP PROOF EQUIPMENT
INSTRUMENT SIZE: 290mm X 180mm X 134mm
WEIGHT: 1.5KG (EXCLUDING HUMIDIFIER) 2.5KG (INCLUDING HUMIDIFIER)
ITEM 001
QUANTITY: 10 SETS-999 SETS
ITEM 002
QUANTITY: 1,000 SETS-9,999SETS
ITEM 003
QUANTITY: ≥10,000 SETS

L-1193  WARTSILA 1.48 MW MODEL 9L20 HFO GENERATOR

MODEL: W9L-20
YEAR: 05/2004
DATE OF COMMISSIONING: 08/09/2004
CAPACITY: 1548 KW
SPEED: 1000 RPM
NO. OF RUNNING HOURS: 41733HRS
INSTALLATION TYPE: STATIONARY ENGINE
FITTED WITH SINGLE BASE FRAME LOADED ON SPRING
ENGINE MOUNTED PHE & CHARGER AIR COOLER.

ALTERNATOR DETAILS:
MAKE: AVK
TYPE: DIG 130K/6
CAPACITY :1852 KVA
SELF EXCITED WITH ROTATING BRIDGEDIODES

BOOSTER AND FEEDER UNIT:
MAKE: WARTSILA INDIA LTD

LUBE OIL SEPARATOR:
MAKE: ALFA LAVAL
MODEL: MMPX 403 SGP-11

HFO SEPARATOR:
MAKE: ALFA LAVAL
MODEL: PA-600

1) HFO STORAGE TANK
CAPACITY :100 KL

2) HFO DAY TANK
CAPACITY :50 KL

3) SLUDGE TANK
CAPACITY :10 KL
CHARGE AIR FILTER:
MAKE: AAF

RADIATOR:
MAKE: COIL COMPANY
MODEL: FCW220

RETURN FUEL UNIT:
MAKE: WARTSILA INDIA LIMITED

ENGINE CONTROL PANEL:
1) ENGINE CONTROL PANEL(CFC_011)
2) BATTERY CHARGER UNIT
MAKE: AMARARAJA
RATING :100AH
PCC PANEL

STARTING AIR COMPRESSOR:
MAKE: INGERSOLL RAND
MODEL :7T2

INCOMING & OUT GOING BREAKER:
MAKE: ABB
TYPE: SF6

QUANTITY: 1

C-4394 SCHOTT & MEISSNER AIRLAID THERMOBONDING LINE, WORKING WIDTH 3400mm, YEAR 2014

SCHOTT & MEISSNER AIRLAID THERMOBONDING LINE
YEAR: 2014
WORKING WIDTH: 3400mm
ON THE MILL FLOOR BUT NEVER INSTALLED
CONSISTING OF:
1 BO 150 BALE OPENER
1 FO 125 FINE OPENER
1 TFF 30 TRANSPORT FAN
2 FC 150 FILLING CAGES
2 BO 150 BALE OPENERS
3 WPS 150 WEIGHING PLATE SYSTEMS
2 CMO 150 CONTINUOUS MIXING OPENERS
1 TFF 30 TRANSPORT FAN
1 LVB 150 LARGE VOLUME BLENDER
1 TFF 30 TRANSPORT FAN
1 DMX METAL DETECTOR
1 PO 175 BUFFER EQUIPMENT
1 TFF 30 TRANSPORT FAN
1 AWF 344 AIRLAID SYSTEM
1 TOPCON LP OVEN
DOUBLE BELT
2 X 3 M SECTIONS
2 X 2 M COOLING SECTIONS
1 CUTTING AND WINDING UNIT
UP TO 1 400 KG/H

QUANTITY: 1 LINE

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

REFERENCE NUMBER: R-4930 
ITEM 001 
TSUDAKOMA POLYESTER / SYNTHETIC YARN SIZING PLANT 
YEAR: 1992 
KSH500 TYPE 
WIDTH: 2200mm 
ITEM 002 
TSUDAKOMA AIR JET LOOMS DOBBY 
QUANTITY: 70 SETS 
ITEM 003 
PLANE LOOM 
QUANTITY: 100 SETS 
QUANTITY AVAILABLE: 1 SET COMPLETE SIZING PLANT 

REFERENCE NUMBER: L-1427

SCREW FEED 6FT
PART #: 99030A276

BRONZE NUT – 2 PIECES
PART #: 95072A361

MOUNTING FLANGE – 2 PIECES
PART #: 95082A644

¾ INCH SCREW FEED 6FT
PART #: 99030A275

BRONZE NUT – 2 PIECES
PART #: 59072A351

MOUNTING FLANGE – 2 PIECES
PART #: 325895082A643

CONVEYOR BELT 45FT
PART #: 5999K5

FLANGE MOUNT BEARINGS – 16 PIECES
PART #: 5968K75

PILLOW BLOCK BEARINGS – 4 PIECES
PART #: 7728756

CHAIN – 50 FT
PART #: 6261K173

SPROKETS – 10 PIECES
PART #: 6733K146


AIR CYLINDER
PART #: 6498K662

AIR CYLINDER
PART #: 6498K232

1 X 2 TUBING – 250 FT
PART #: N/A

2 3/8” FLAT STEEL – 60 FEET
PART #: N/A

SHEET STEEL – 4FT X 8FT X ¼” – 2 PIECES
PART #: N/A

SHEET STEEL – 18 GAUGE – 4FT X 8FT – 5 PIECES
PART #: N/A

1 5/8 COLD ROLL SOLID – 40FT
PART #: N/A

1 INCH COLD ROLL SOLID – 20FT
PART #: N/A

3 INCH COLD ROLL SOLID
PART #: N/A