Phone: +1 (864) 574-0404
Compare Products
  • Home
  • Search results for: 'machine cap'

Search results for: 'machine cap'

Items 51-60 of 64

Page
per page
Set Ascending Direction
Related search terms
machine tr
Machine+fe
machine+de
machine de''
machines
  1. AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE
    AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE
    Compare
    REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More
  2. T-6546 PFE TESTER FOR PELLET FILTRATION EFFICIENCY OF SURGICAL MASK
    T-6546 PFE TESTER FOR PELLET FILTRATION EFFICIENCY OF SURGICAL MASK
    Compare
    REFERENCE NUMBER: T-6546
    PFE TESTER FOR PELLET FILTRATION EFFICIENCY OF SURGICAL MASK
     
    INTRODUCTION
    MEDICAL SURGICAL MASK PARTICLE FILTRATION EFFICIENCY PFE TESTER IS SUITABLE FOR MEDICAL INSTRUMENT INSPECTION CENTER, SAFETY PROTECTION INSPECTION CENTER, LABOR PROTECTION INSPECTION CENTER, DRUG INSPECTION CENTER, DISEASE PREVENTION AND CONTROL CENTER, TEXTILE INSPECTION CENTER, HOSPITAL, MASK AND RESPIRATOR MANUFACTURERS, ETC.
     
    FEATURES
    THE PFE TESTER FOR PARTICLE FILTRATION EFFICIENCY OF SURGICAL MASKS IS EQUIPPED WITH A SPECIAL SALT AEROSOL GENERATOR, WHICH CAN PRODUCE AEROSOLS WITH SPECIFIC PARTICLE SIZE AND CONCENTRATION.
    EQUIPPED WITH A SERIES OF SPECIAL FIXTURE, SUITABLE FOR THE DETECTION OF ALL KINDS OF MASKS.
    BUILT-IN HIGH LIFE PHOTOMETER MODULE, SAMPLING TIME ACCUMULATION, PROMPT LIGHT CLEANING.
    AUTOMATIC CONTROL OF AEROSOL GENERATION, AUTOMATIC CALCULATION OF CAPTURE EFFICIENCY AND MASK AIRFLOW RESISTANCE, REDUCE HUMAN INTERVENTION.
    BUILT-IN HIGH PRECISION ELECTRONIC FLOWMETER AND HIGH PERFORMANCE SAMPLING PUMP TO ENSURE FLOW STABILITY.
     
    PARAMETER
    TEST FLOW: PARAMETER RANGE: (5 ~ 100) L/MIN; RESOLUTION: (5 ~ 100) L/MIN;
    MAXIMUM ALLOWABLE ERROR: ±1%
    PRESSURE DETECTION RANGE: PARAMETER RANGE: (0 ~ 2500) PA; RESOLUTION: 0.1PA; MAXIMUM ALLOWABLE ERROR: ±1%
    CONCENTRATION DETECTION RANGE: PARAMETER RANGE: (0.001 ~ 100) 0 G/L;
    DETECTION ACCURACY: 1% OF THE READ VALUE IN THE RANGE OF 0.01% TO 100%
    DETECTION REPEATABILITY: 5% OF THE READ VALUE IN THE RANGE OF 0.01% TO 100% MEDIAN DIAMETER OF SALT AEROSOL PARTICLES (CMD): (0.075±0.02)
    MMEDIAN AEROSOL PARTICLE NUMBER DIAMETER (CMD) (OPTIONAL): (0.185±0.02) M
    OPERATING TEMPERATURE: 20±5C
    INSTRUMENT NOISE: <60DB(A)
    POWER SUPPLY: AC220V±10%, 50HZ
    MAIN MACHINE SIZE: (LENGTH 700 X WIDTH 720 X HEIGHT 1450) mm
     
    QUANTITY: 1
    Learn More
  3. P-8696 ULTRASONIC SEWING MACHINE
    P-8696 ULTRASONIC SEWING MACHINE
    Compare

    REFERENCE NUMBER: P-8696 

    ULTRASONIC SEWING MACHINE 

     

    CAN BE USED WITH EITHER 20 KHz, 30 KHz OR 40 KHz EQUIPMENT 

    LED DISPLAY FOR EASY PROCESS MONITORING 

    19” (483mm) THROAT 

    INDEPENDENT CONTROLS FOR SLITTING AND ROTARY ANVIL WELDING 

    DUAL SEALING CAPABILITIES WITH INDEPENDENT ADJUSTMENTS 

    EDGE GUIDING, REWINDING, AND FEED ROLLS CAN BE USED 

    CAN BE OPERATOR CONTROLLED AS A BENCHTOP UNIT OR INTEGRATED INTO AN EXISTING LINE 

     

    QUANTITY: 1 

    Learn More
  4. DD-1000 AUTOMATIC COMPRESSION, FOLD AND ROLL PACKING LINE FOR POCKET COIL MATTRESSES , FOAM MATTRESS AND FOAM TOPPERS
    DD-1000 AUTOMATIC COMPRESSION, FOLD AND ROLL PACKING LINE FOR POCKET COIL MATTRESSES , FOAM MATTRESS AND FOAM TOPPERS
    Compare

    ROLLED MATTRESS OUTPUT DIAMETER: MINIMUM 250mm, MAXIMUM 500mm

    ITEM 001
    AUTOMATIC MATTRESS FILM & COMPRESSION MACHINE
    PRESSURE PLATE DIMENSIONS: 2300mm x 2200mm
    WORKING PRESSURE: 100 TONS
    OPENING CLEARANCE: 500mm
    OIL CYLINDERS: 4
    AIR CYLINDERS: 19
    CONVEYOR BELTS: 2
    TOTAL POWER: 14.8 KW
    EXTERNAL DIMENSIONS: 6530mm x 3200mm x 2700mm
    VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
    QUANTITY: 1

    ITEM 002
    ROTATING TABLE
    OVER SIZE: 3170mm x 2040mm x 950mm
    WEIGHT: 1500 KG
    VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
    POWER: 0.75 KW
    QUANTITY: 1

    ITEM 003
    FOLDING TABLE SIZE
    OVER SIZE: 2910mm x 2750mm x 2350mm
    WEIGHT: 2500 KG
    POWER: 2.75 KW
    VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
    QUANTITY: 1

    ITEM 004
    AUTOMATIC ROLLING MACHINE
    MATTRESS SIZE: 2000 x 2200mm
    OVER SIZE: 2600mm x 3500mm x 2900mm
    WEIGHT: 6000 KG
    DIAMETER: 250 TO 500mm
    POWER: 19 KW
    VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
    QUANTITY: 1

    TOTAL POWER: 37.3 KW

    GENERAL INFORMATION: 
    CAPACITY: 1 PIECE PER MINUTE
    FOAM DENSITY: ≥25 kgs/m3 , ≥45kgs/m3
    WEIGHT: 15,000 KG
    VOLUME: 80 m3

    IF SPACE FOR MATTRESS PLACEMENT IS ADDED, THE TOTAL SIZE REQUIRED FOR THE ENTIRE MACHINE IS: LENGTH 20 METERS x WIDTH 4 METERS x HEIGHT 3.5 METERS

    REQUIRES TWO 40-FOOT HIGH CUBE CONTAINERS TO SHIP

    Video 1: https://www.youtube.com/watch?v=c5xzLBf2uLs
    Video 2: https://www.youtube.com/watch?v=__9A5sQxqtc
    Video 3: https://www.youtube.com/watch?v=bT2zlMYOg-s
    Video 4: https://www.youtube.com/watch?v=R-68eSQby0M

    Learn More
  5. J-2375 COMPLETE CERAMIC TILE PRODUCTION PLANT, PRODUCTION 7 MILLION SQUARE METERS PER YEAR
    J-2375 COMPLETE CERAMIC TILE PRODUCTION PLANT, PRODUCTION 7 MILLION SQUARE METERS PER YEAR
    Compare

    TILE FACTORY DESIGNED BY SACMI / ITALY
    YEAR ESTABLISHED 2014 TO 2016
    THIS PLANT IS AN ENVIRONMENTALLY FRIENDLY ENTERPRISE, WHEN IT RECYCLES 100% OF ITS EFFLUENTS AND PERFORMS HEAT RECOVERY, THEREBY SAVING ENERGY

    See all pictures:
    https://www.flickr.com/photos/183869481@N08/albums/72157710649767958

    THE PLANT:
    COVERS AN AREA OF 22 THOUSAND SQUARE METERS
    THE PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
    CERAMIC FLOOR TILES
    CERAMIC WALL TILES
    BMR POLISHING LINE
    BMR SQUARING & CHANFERING LINE
    THE MAIN RAW MATERIALS ARE CLAY (DB-4) - 31 %, ALBITE (STD5) - 60 %
    NEPHAIIN (PN9595) - 2.5 %, KAOLIN (RHB1) - 6.5 %
    ON TOP OF IT THEY ARE USING GLAZE MATERIALS AND PAINTS
    •FROM THE MOMENT THE MATERIAL IS PREPARED IT IS BEING DRIED PRESSED ON ONE OF FOUR (4) PRODUCTION LINES.
    •TWO (2) LINES ARE WITH SACMI PRESSES OF PH 7,500 TON EACH AND HORIZONTAL DRYERS SACMI
    •TWO LINES ARE WITH SACMI PRESSES OF PH 3,590 TON EACH AND VERTICAL DRYERS SACMI
    •ALL FOUR (4) LINES HAVE THEIR OWN DIGITAL PRINTING MACHINE INCORPORATED
    •ALL PRODUCTS ARE BEING GLAZED AND FIRED ON 1200 DEGREES IN ONE OF THE TWO (2) KILNS, SACMI
    FOUR (4) SORTING, PACKING AND PALLETIZING LINES
    GLAZE PREPARATION LINE
    COMPLETE INSTALLATION FOR SMALL PRODUCTION CAPACITIES
    COMPLETE FOILING LINE
    COMPLETE ELECTRIC INSTALLATION
    POWER GENERATOR UNIT
    COMPRESSED AIR INSTALLATION

    MACHINES ARE MADE BY:
    SACMI: ITALY
    NUOVA ERA / ROBOBOX: ITALY
    BMR: ITALY
    IN.TE.SA: ITALY
    CUCCOLINI: ITALY
    SYSTEM CERAMICS: ITALY
    TGMAC SR.L: ITALY
    DURST: GERMANY
    ROTOCOLOR MAG: ITALY
    NUOVA FIMA: ITALY
    OMS: ITALY
    MARPAK OMS: ITALY
    MESSERSI PACK: ITALY

    TILE SIZES
    THE FACTORY MANUFACTURES TILES OF VARIOUS SIZES FROM 300 X 300 TO 1200 X 1200mm IN VARIOUS TEXTURES AND DESIGNS USING DIGITAL PRINTING MACHINES
    PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
    THE FACTORY IS FULLY AUTOMATED AND USING ADVANCED CONTROL SYSTEMS!

    HUGE AMOUNT OF ORIGINAL SPARE PARTS AVAILABLE WITH THIS PLANT
    THIS PLANT IS AVAILABLE WITH THE COMPLETE ELECTRIC, AIR, GAS, RECYCLING INSTALLATION

    THIS PLANT CAN BE SOLD: WITH 4 LINES OR 2 AND 2 LINES

     

    Learn More
  6. J-1590 CIBITEX EASYCOAT-DRY FABRIC DYEING PRE-TREATMENT UNIT
    J-1590 CIBITEX EASYCOAT-DRY FABRIC DYEING PRE-TREATMENT UNIT
    Compare

    MAKE: CIBITEX
    COMPACT UNIT FOR PRE-TREATMENT AND DRYING OF FABRICS PRINTED USING BOTH ACID, REACTIVE OR PIGMENTED INKS
    MAXIMUM WORKING WIDTH: 1800mm
    POWER INSTALLED: 82 Kw
    VOLTAGE: 400 V 50Hz
    MAXIMUM CYLINDERS TEMPERATURE: 210 °C
    INTERNAL CONTENT (DEPENDING ON FABRIC): 300 M
    MAX LOAD: 280 KG
    COATING BASIC CAPACITY: 40 L
    DIMENSIONS: 3500 X 4600 X 1890mm
    WEIGHT: 4,935 KG

    QUANTITY: 1

     

    Click here to watch the videos of this machine on YouTube.

    Learn More
  7. L-4643 SUCKER MULLER HACOBA SIZING MACHINES, MODEL AP-1000/1250, WIDTH 2600mm, YEAR 2000
    L-4643 SUCKER MULLER HACOBA SIZING MACHINES, MODEL AP-1000/1250, WIDTH 2600mm, YEAR 2000
    Compare

    REFERENCE NUMBER: L-4643
    MODEL: AP-1000/1250
    WIDTH: 2600mm
    YEAR: 2000
    QUANTITY: 1

    Learn More
  8. M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm
    M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm
    Compare

    M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

    2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
    1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
    1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
    1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
    2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
    IN FRONT OF:
    1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
    1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
    1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
    6 FILTER UNITS.

    - ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
    - CAPACITY UP TO 1000KG/HR.

    Learn More
  9. P-3408 OSTHOFF ST80 SINGEING MACHINE YEAR 1990 WIDTH 1800mm
    P-3408 OSTHOFF ST80 SINGEING MACHINE YEAR 1990 WIDTH 1800mm
    Compare

    P-3408 OSTHOFF ST80 SINGEING MACHINE YEAR 1990 WIDTH 1800mm

    OSTHOFF
    MADE: GERMANY
    TYPE: ST80
    SINGEING MACHINE
    YEAR: 1990 (COMPLETELY OVERHAULED IN 2001)
    WORKING WIDTH: 1800mm
    ROLLER WIDTH: 2000mm

    CONSISTED OF FOLLOWING PARTS:
    BEATING AND BRUSHING UNITS FOR FILTER
    FEED KF10
    SINGEING UNITS WITH 2 BURNERS
    BEATING AND BRUSHING UNIT TYPE V899 (YEAR 2001)
    DESIZING THROUGH WITH 5 m CAPAPCITY
    SQUEEZER MENZEL
    BIG BATCHER

    QUANTITY: 1 SET

    Learn More
  10. P-3457 THIBEAU CARD CA11-R3P5PP (LL), WIDTH 3500mm, YEAR 1997
    P-3457 THIBEAU CARD CA11-R3P5PP (LL), WIDTH 3500mm, YEAR 1997
    Compare

    P-3457 THIBEAU CARD CA11-R3P5PP (LL), WIDTH 3500mm, YEAR 1997

    THIBEAU
    MODEL: CA 11
    TYPE: R3P5PP (LL)
    CARDING MACHINE
    YEAR: 1997
    WORKING WIDTH: 3500mm
    DELIVERY WEIGHT 26 to 40 GR/SQM
    DELIVERY SPEED UP TO 90m/min
    PRODUCTION CAPACITY APPROXIMATELY 700 KILOGRAMS PER HOUR
    WEIGHING SYSTEM ACE
    WIDTH: 3500mm
    TRUTZSCHLER
    EXACTAFEED FBK
    WIDTH: 3500mm
    THE MACHINES ARE IN VERY GOOD CONDITION BECAUSE THEY HAVE BEEN USED FOR SOME MONTHS ONLY
    NOW THEY ARE DISMANTLED AND STORED IN DRY WARE HOUSE
    THE CARDING MACHINE IS PACKED INTO WOODEN BOXES

    QUANTITY: 1

    Learn More

Items 51-60 of 64

Page
per page
Set Ascending Direction
Compare Products
  1. Remove This Item
Compare
Clear All
You have no items to compare.
Copyright © 2013-present Magento, Inc. All rights reserved.