Search results for: 'stea'

REFERENCE NUMBER: M-3984

RING SPINNING

 

(1) TRUTZSCHLER BLENDOMAT BDT 019, YEAR 1990

(1) TRUTZSCHLER BLENDER GBRA 1000, YEAR 1990

(1) TRUTZSCHLER AXIFLOW AFC, YEAR 1990

(1) TRUTZSCHLER MULTIMIXER MPM8/1400, YEAR 1990

(1) TRUTZSCHLER SEPAROMAT ASTA 800, YEAR 1990

(2) TRUTZSCHLER SILO BEB 1200, YEAR 1990

(2) TRUTZSCHLER FIBER OPENER RST, YEAR 1990

(5) TRUTZSCHLER CONDENSER LVSA, YEAR 1990

(4) TRUTZSCHLER FAN TV 425, YEAR 1990

(2) TRUTZSCHLER FAN TVF 425, YEAR 1990

(3) TRUTZSCHLER FAN TV 500, YEAR 1990

(1) TRUTZSCHLER FAN TVK 650, YEAR 1990

(3) TRUTZSCHLER FILTER SFV 123, YEAR 1990

(1) TRUTZSCHLER FILTER SFF 3, YEAR 1990

(3) TRUTZSCHLER CYCLON ANB AT, YEAR 1990

(1) TRUTZSCHLER FEED TABLE (OPENING) M30 S/C, YEAR 1990

(2) TRUTZSCHLER FEED TABLE (FILTER) S/N S/C, YEAR 1990

(1) TRUTZSCHLER FEED TABLE (CARDS), YEAR 1990

(14) TRUTZSCHLER CHUTE FEED FBK 533, YEAR 1990

 

(5) RIETER DRAW FRAME SB2, CAN SIZE 1000x1200mm, YEAR 1997

(2) RIETER DRAW FRAME RSB D30, CAN SIZE 500x1000mm, YEAR 1999

(3) RIETER DRAW FRAME RSB 951, CAN SIZE 600x1200mm, YEAR 1997

 

(2) ZINSER/HARA LAP FORMER 820, 20 POSITIONS, 1000x1040mm, YEAR 1990

(12) ZINSER/HARA COMBER 830, CAN SIZE 500x1200mm, YEAR 1990

(1) ELECTRONIC CLEANER PANEL, YEAR 1990

 

(5) ZINSER ROVING FRAME 660, 120 POSITIONS, 16x6, CAN SIZE 500x1000mm, YEAR 1990.

(3) SOHLER AIRTEX OVERHEAD BLOWER SP 88 ZB, YEAR 1990

 

(20) ZINSER RING FRAME 321E, 1000 SPINDLES, RING DIA 45mm, GAUGE 75mm, YEAR 1990

(10) SOHLER AIRTEX OVERHEAD BLOWER AP 88 ZZ WI, YEAR 1990

(1) SUCTION FAN, YEAR 1990

 

(4) MURATA WINDER 7 II (MACH CONER), 60 POSITIONS, WITH LUWA OVERHEAD BLOWER, YEAR 1990

 

(1) XORELLA STEAMER CONTEXXOR, YEAR 1990

Learn More

C-4026 NUOVO PIGNONE GAS TURBINE, 11 MW AND CONDENSING TURBO GENERATOR SETS, 44.5 MW, YEAR 2002

OFFER 001
11.7 MWE GAS TURBINE-GENERATOR SETS
GAS TURBINES
MANUFACTURER: NUOVO PIGNONE
MODEL: PGT10B-1
TYPE: MULTI-SHAFT, HEAVY DUTY GAS TURBINE
FUEL: NATURAL GAS

OFFER 002
ALTERNATOR
MANUFACTURER: ANSALDO
APPARENT POWER: 13,569 KVA
ACTIVE POWER: 11,000 KW
POWER FACTOR: 0.8
RATED SPEED: 1,500 RPM

OFFER 003
65.7 TPH WASTE HEAT RECOVERY BOILERS
BOILERS
MANUFACTURER: MACCHI
THERMAL RATING: 55,330 KW
NET THERMAL EFFICIENCY. COP: 90.32%
NET THERMAL EFFICIENCY. COV: 92.48%

OFFER 004
44.5 MW CONDENSING TURBO-GENERATOR SET
STEAM TURBINE
MANUFACTURER: NUOVO PIGNONE
MODEL NUMBER: HNK 50/3.2
CONFIGURATION: 1 IMPULSE STAGE 62 REACTION STAGES
RATED POWER: 44,500 KW
RATED INLET FLOW: 131,400 KG/H

OFFER 005
GENERATOR
MANUFACTURER: JEUMONT INDUSTRIE
RATED APPARENT POWER: 51,500 KVA
POWER FACTOR: 0.8
ACTIVE POWER: 41,200 KW

OFFER 006
CONDENSER
MANUFACTURER: CALDEMON
TYPE: SURFACE CONDENSER

QUANTITY: 2

Learn More

C-3980 KRAFT PAPER MAKING MACHINE WITH GAS BOILER, CAPACITY 3 TO 5 T/D, NET PAPER WIDTH 1200mm

KRAFT PAPER MAKING MACHINE
WITH GAS BOILER
CAPACITY: 3 TO 5 T/D KRAFT PAPER MACHINE
1092 KRAFT CORRUGATED PAPER MACHINE
WITH RECYCLE PAPER AS RAW MATERIAL
TECHNICAL PARAMETER:
OUTPUT: KRAFT PAPER, CORRUGATED PAPER
WEIGHT: 60 TO 180G/M2
NET PAPER WIDTH: 1200mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5393 (2206YBJL1UM) L TUFTCO COATING LINE WITH FOAM MACHINE AND SLITTING OPERATION TUFTO COATING LINE FOR EMBOSSED UNITARY BACKED RUGS USING WASHABLE LATEX FOR EMBOSSED WASHABLE RUGS – SET UP FOR 12’ WIDTH AND INCLUDES THE FOLLOWING: TISI MODEL 38500 BUTT SEAMER WITH TRIMMER ON RAIL ENTRANCE J-BOX VERTICAL KEYON PIN TENTER DIRECT COAT APPLICATOR, ROLL OVER ROLL WITH TRAVERSING SYSTEM DAY TANK TO FEED LATEX TO FROTH MACHINE EASE TYPE FROTH MACHINE PRE-STEAMER BANK OF ELECTRIC INFRAREDS TWO BASKET-WEAVE EMBOSSING ROLLERS FOR 12’ WIDTHS FOUR MODULE NATURAL GAS HEATED TUFTCO CURING OVEN COOL OUT SECTION SLITTING SECTION WITH EIGHT SLITTING HEADS AND A CAMERA GUIDING SYSTEM 10 LOOP ACCUMULATOR ROLLUP ELECTRICAL CONTROL SYSTEM BY TUFTCO SPEED RANGE: LINE SPEED FOR COATING 50 OUNCE/SQUARE YARD FACE WEIGHT WITH 24 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 35FPM, LINE SPEED FOR COATING 30 OZ/SQUARE YARD FACE WEIGHT WITH 20 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 45 FPM. TOILET SEAT CONVERS ARE COATED WITH APPROXIMATELY 7 OZ/SQUARE YARD AT 70 FPM. NOTE THE MAXIMUM MECHANICAL SPEED OF THE COATING LINE IS 70 FPM. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3608 (880195BAG7R) K BRUCKNER STENTER YEAR 1998 WIDTH 2000mm HOT OIL HEATED -6 ZONES -HORIZONTAL CHAIN -PIN ONLY BRAND BRUCKNER YEAR 1998 WORKING WIDTH 2000mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4694 (11118BCBD10RC) L BRUCKNER OPTI-SHRINK SANFORIZER YEAR 2003 WIDTH 2000mm BRUCKNER SANFORIZING MACHINE YEAR 2003 TYPE OPTI-SHRINK WORKING WIDTH 2000mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-5352 (22055ZTLV1UX) L FARE SUPERSTAPLE LINE FARE SUPERSTAPLE LINE, CONSISTING OF: EXTRUDER 200mm DIAMETER x 32:1 L/D, 9/1984, PFC #AP-1321-01-821-860-001.00, 600 HP DC. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5350 (220LWGPXX1) L BRUCKNER MULTILAYER STENTER FOR KNIT AND WOVEN FABRIC YEAR 1995 WIDTH 2200mm MULTILAYER STENTER MACHINE FOR KNITTING FABRIC AND WOVEN FABRIC MANUFACTURE: BRUECKNER YEAR: 1995 WORKING WIDTH: 2200mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-2020 (770100HAN6UX) BRUCKNER STENTER YEAR 1971 WIDTH 3200mm YEAR 1971 MODEL BRUCKNER 9 CHAMBERS STEAM HEATED WIDTH 3200mm MAHLO PADDER EQUIPPED WITH WEFT STRAIGHTNER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-2021 (770110GHA6UX) BRUCKNER STENTER YEAR 1982 WIDTH 3200mm YEAR 1982 MODEL BRUCKNER 9 CHAMBERS STEAM HEATED WIDTH 3200mm MAHLO PADDER EQUIPPED WITH WEFT STRAIGHTNER QUANTITY AVAILABLE: 1 Learn More