YY-2111 AUTOMATIC CUTTER, CUTTING WIDTH 3mm TO 1600mm
APPLICATION: USE FOR MELT-BLOWN FABRIC, NON-WOVEN FABRIC, FOAM TAPE, MASKING TAPE, ETC.
SPECIFICATIONS:
ROLLER WIDTH: 1700mm
CUTTING WIDTH: 3mm TO 1600mm
PAPER CORE I.D.: 76.2mm OR CHANGEABLE
CUTTING DIAMETER: MAXIMUM 550mm
AIR SOURCE: 0.5 MILLIPASCALS
QUANTITY: 1
Learn More
REFERENCE NUMBER: M-3013 (770OIGFXX6)-D
SPUHL ANDERSON PC6 PANEL CUTTER
SPUHL ANDERSON PANEL CUTTER 95” MODEL PC6
YEAR OF PRODUCTION: CE 97
OPERATION VOLTAGE: 220 VAC
CONTROL VOLTAGE: 110 VAC
CONTROL VOLTAGE: 24 VDC
TOTAL NOMINAL CURRENT: 10A
MAIN SUPPLY FUSE: 25A
FREQUENCY: 60HZ
CONTROL VOLTAGE: 15VDC
MAX. WORKING WIDTH: APPROX. 95”
WITH (2) CIRCULAR BLADES TO TRIM THE EDGE AND WITH BLADE SHARPENERS
WITH (14) CIRCULAR BLADES TO CUT BORDER AND WITH BLADE SHARPENERS
(2) TAKE-OFF SHAFTS FOR CARDBOARD TUBES WITH FABRICS
QUANTITY AVAILABLE: 1
Learn More
V-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTING
For Max. Block Size: Length 2440 mm (96 in), Width 1220 mm (48 in), Height 600 mm (23.6 in)
Machine for cutting pipe insulation
A programmed-control cutting machine which runs on AutoCAD, controlled by computer.
Main Features of Contour Cutter:
1. Integrated design & cutting program. Simply design and cut;
2. Big cost savings by automatically arranging the product;
3. Support numeric instrument;
4. Higher material utilization resulting from computer aided nesting of shapes;
5. Cut speed can be set to achieve the best-cut speed for different foam material;
6. Can pre-cut on the computer to check cutting course;
7. With Nesting System
Learn More
V-2172 CARBON FIBER STAPLE CUTTER BY ROTARY WHEEL CUTTING SYSTEM
CUT LENGTH: SET ANY LENGTH
TOW SPEED: 50 TO 260 METERS PER MINUTE
OUTPUT: 20 TO 50 KGS PER HOUR
(See Video)
QUANTITY: 1
Learn More
SPUHL ANDERSON
PANEL CUTTER
WITH CORNER ROUND DIES
PC 2 REBUILT JULY 2004 BY SCHMIDT MACHINE CO
FULLY FUNCTIONAL IN USE UNTIL MAY OF THIS YER
IT WAS MOVED TO OUT NEW LOCATION
THIS UNIT HAS 3 DIE CUTS
MAX WIDTH FABRIC IS 94"
THERE ARE ONLY TWO DIE CUTS BOTH HAVE 3" RADIUS
ONE ADDITIONAL ITEM I FORGOT BEFORE IS THERE IS A CENTER CUT BLADE AS WELL AS THE TWO OUTSIDE EDGE BLADES.
Learn More
YY-2111 AUTOMATIC CUTTER, CUTTING WIDTH 3mm TO 1600mmYY-2111 AUTOMATIC CUTTER, CUTTING WIDTH 3mm TO 1600mm APPLICATION: USE FOR MELT-BLOWN FABRIC, NON-WOVEN FABRIC, FOAM TAPE, MASKING TAPE, ETC. SPECIFICATIONS: ROLLER WIDTH: 1700mm CUTTING WIDTH: 3mm TO 1600mm PAPER CORE I.D.: 76.2mm OR CHANGEABLE CUTTING DIAMETER: MAXIMUM 550mm AIR SOURCE: 0.5 MILLIPASCALS QUANTITY: 1 Learn More
TT-6323 FIBER TOW CUTTERS WITH TENSION MACHINE, WIDTH 45mmTT-6323 FIBER TOW CUTTERS WITH TENSION MACHINE, WIDTH 45mm WOODEN CASE PACKAGE AND INLAND CHARGE Learn More
TT-8339 DIGITAL OSCILLATING CUTTING MACHINETT-8339 DIGITAL OSCILLATING CUTTING MACHINE 1. MODEL: 1 DIGITAL KNIFE 5 X 8 FEET 2. MODEL: 2 DIGITAL KNIFE 4 X 4 FEET 3. 1 DIGITAL KNIFE CUTTING TABLE WITH OSCILLATING KNIFE AND VACUUM TABLE MACHINE 4. 2 DIGITAL KNIFE CUTTING TABLE WITH OSCILLATING KNIFE AND VACUUM TABLE MACHINE 5. OSCILLATING KNIFE: OSCILLATING KNIFE FOR CUTTING GASKET, FIBER, RUBBER, SILICONE, CARDBOARD, PAPERBOARD, CORRUGATED BOARD, FOAM, LEATHER, FOAM, PET FELT. ETC Learn More
M-3013 SPUHL ANDERSON PC6 PANEL CUTTERREFERENCE NUMBER: M-3013 (770OIGFXX6)-D SPUHL ANDERSON PC6 PANEL CUTTER SPUHL ANDERSON PANEL CUTTER 95” MODEL PC6 YEAR OF PRODUCTION: CE 97 OPERATION VOLTAGE: 220 VAC CONTROL VOLTAGE: 110 VAC CONTROL VOLTAGE: 24 VDC TOTAL NOMINAL CURRENT: 10A MAIN SUPPLY FUSE: 25A FREQUENCY: 60HZ CONTROL VOLTAGE: 15VDC MAX. WORKING WIDTH: APPROX. 95” WITH (2) CIRCULAR BLADES TO TRIM THE EDGE AND WITH BLADE SHARPENERS WITH (14) CIRCULAR BLADES TO CUT BORDER AND WITH BLADE SHARPENERS (2) TAKE-OFF SHAFTS FOR CARDBOARD TUBES WITH FABRICS QUANTITY AVAILABLE: 1 Learn More
J-2125 COMPUTERIZED CHAIN-STITCH MULTI-NEEDLE QUILTING MACHINE & PANEL CUTTER (NEW) -WIDTH 2450mmJ-2125 COMPUTERIZED CHAIN-STITCH MULTI-NEEDLE QUILTING MACHINE & PANEL CUTTER (NEW) -WIDTH 2450mm QUILTING MACHINE QUILTING WIDTH: 2450mm QUANTITY: 1 PANEL CUTTER SPEED: 10 METERS PER MINUTE POWER: 3.2 KW AIR PRESSURE: 0.4 TO 0.8 Mpa VOLTAGE: 380 V / 50 Hz, 220 V / 60 Hz, 3-PHASE DIMENSIONS: 3500 x 1150 x 2300 (L x W x H mm) WEIGHT: 1150 KG QUANTITY: 1 Learn More
V-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTINGV-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTING For Max. Block Size: Length 2440 mm (96 in), Width 1220 mm (48 in), Height 600 mm (23.6 in) Machine for cutting pipe insulation A programmed-control cutting machine which runs on AutoCAD, controlled by computer. Main Features of Contour Cutter: 1. Integrated design & cutting program. Simply design and cut; 2. Big cost savings by automatically arranging the product; 3. Support numeric instrument; 4. Higher material utilization resulting from computer aided nesting of shapes; 5. Cut speed can be set to achieve the best-cut speed for different foam material; 6. Can pre-cut on the computer to check cutting course; 7. With Nesting System Learn More
V-2172 CARBON FIBER STAPLE CUTTER BY ROTARY WHEEL CUTTING SYSTEMV-2172 CARBON FIBER STAPLE CUTTER BY ROTARY WHEEL CUTTING SYSTEM CUT LENGTH: SET ANY LENGTH TOW SPEED: 50 TO 260 METERS PER MINUTE OUTPUT: 20 TO 50 KGS PER HOUR (See Video) QUANTITY: 1 Learn More
PP-1169 JAMES CASH K10 PANEL CUTTERPP-1169 JAMES CASH K10 PANEL CUTTER 2 BLADES ON IT NOW BUT MORE CAN BE ADDED QUANTITY: 1 Learn More
SPUHL ANDERSON PANEL CUTTER WITH CORNER ROUND DIESSPUHL ANDERSON PANEL CUTTER WITH CORNER ROUND DIES PC 2 REBUILT JULY 2004 BY SCHMIDT MACHINE CO FULLY FUNCTIONAL IN USE UNTIL MAY OF THIS YER IT WAS MOVED TO OUT NEW LOCATION THIS UNIT HAS 3 DIE CUTS MAX WIDTH FABRIC IS 94" THERE ARE ONLY TWO DIE CUTS BOTH HAVE 3" RADIUS ONE ADDITIONAL ITEM I FORGOT BEFORE IS THERE IS A CENTER CUT BLADE AS WELL AS THE TWO OUTSIDE EDGE BLADES. Learn More