Search results for: 'control+pr'

REFERENCE NUMBER: A-2472 INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT MACHINE HAS A HIGH PRODUCTION CAPACITY. IT ALSO ENABLES EASY MONITORING AND MANAGEMENT OF ALL PARAMETERS THAT ARE EFFECTIVE IN THE PRODUCTION OF NANOFIBERS. FOR THE COMMERCIAL PRODUCTION, REPEATABLE PRODUCTION OF MATERIALS IN UNIFORM AND SPECIFIC STANDARDS HAS THE HIGHEST IMPORTANCE. MACHINE IS EQUIPPED WITH 132 ELECTROSPINNING NEEDLES AND A HOMOGENIZATION SYSTEM, ALLOWING THE SURFACE TO BE UNIFORMLY AND CONTINUOUSLY AT A WIDTH OF 1 METER. BECAUSE OF ITS ADVANCED AUTOMATION SYSTEM AND THE AIR CONDITIONING EQUIPMENT, IT ENABLES CONTINUOUS PRODUCTION AT THE HIGHEST SET QUALITY EVEN UNDER CHANGING ENVIRONMENTAL CONDITIONS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 600 KGS DIMENSIONS: 3650 x 1950 X 1940 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: IN THE SPINNERET 0-(+)60 KV VOLTAGE PRECISION: 0.1 KV MAXIMUM CURRENT: 3 MA PUMP SYSTEM FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML CONTINUES FEEDING PUMP SYSTEM FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 33 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 132 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: STANDARD NOZZLE: 0.8 mm (DIFFERENT DIAMETERS CAN BE USED) MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 25 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 150 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 50 mm TO 350 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 1000 mm SUBSTRATE WINDING SPEED: MAX. 0,1 M/ min TO MIN. 10 M/ min COATING HOMOGENEITY SYSTEM: X-AXIS STROKE OF COATING HOMOGENEITY SYSTEM: 30 mm TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12” TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 Hz @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 5000 X 3000 mm Learn More

REFERENCE NUMBER: M-5320 (220AFWYXX1) L TRUTZSCHLER BLOW ROOM, CARDS, AND DRAWING FRAMES YEAR 2006-2008 (1) X TRUTZSCHLER BLENDOMAT BO-A 2300 AUTOMATIC BALE OPENER, WORKING WIDTH 2.3M (6) X TRUTZSCHLER BR-EU EXTENSION UNIT (1) X TRUTZSCHLER BR-FD500 FAN (1) X TRUTZSCHLER BR-COU CONDENSER (1) X TRUTZSCHLER SP-ICH BUILT IN HEAVY PARTICLE SEPARATOR (1) X TRUTZSCHLER SP-EM ELECTRONIC METAL SEPARATOR (1) X TRUTZSCHLER BR-2W 2-WAY DISTRIBUTOR (1) X TRUTZSCHLER BR-F425 FAN (1) X TRUTZSCHLER MX-16 MULTI MIXER (1) X TRUTZSCHLER BR-WS SERVICING AREA (1) X TRUTZSCHLER CLEANOMAT CL-C4 CLEANER (1) X TRUTZSCHLER BR-MC MANUAL FEEDER (1) X TRUTZSCHLER BR-FD425 FAN (1) X TRUTZSCHLER SP-F FOREIGN PART SEPARATOR (1) X TRUTZSCHLER BR-FD425 FAN (1) X TRUTZSCHLER BR-COU CONDESNOR (1) X TRUTZSCHLER BR-TD T-DISTRIBUTOR (1) X TRUTZSCHLER LC-12 INSTALLATION CONTROL (1) X TRUTZSCHLER BR-WC WASTE COLLECTOR (1) X TRUTZSCHLER BR-R1 DUCT CARDING DRAWING SPARE PARTS WESSNER AIR CONDITIONING PLANT MADE IN GERMANY Learn More

REFERENCE NUMBER: A-2479 ENTRY LEVEL MULTI NOZZLE ELECTROSPINNING UNIT THIS MACHINE IS DESIGNED TO ACCOMMODATE THE MAXIMUM COMPONENTS REQUIRED FOR AN OPTIMIZED AND VERSATILE ELECTROSPINNING PROCESS. IT’S AN IDEAL SOLUTION FOR LOWER-BUDGET PROJECTS WORKING ON SMALL-SCALE NANOFIBERS RESEARCH. IT HAS 3 HYBRID NOZZLES, SPINNING ON A ROTATING DRUM COLLECTOR OR PLATE COLLECTOR, THEREFORE ENABLING THE PRODUCTION OF BOTH WELL-ALIGNED AND RANDOMLY COLLECTED NANOFIBERS. THE HOMOGENEITY SYSTEM ALLOWS THE USER TO PRODUCE A UNIFORM AND HOMOGENEOUS NANOFIBERS MEMBRANES. SPECIFICATIONS: SPINNING-TYPE: SIDE BY SIDE SPINNING CHASSIS: ENCLOSED CHASSIS FOR SPINNING AREA FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL LED ILLUMINATION EXHAUST FAN TOTAL WEIGHT: APPROX.60 KGS DIMENSIONS: 740 X 645 X 770 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: 0 TO 30 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.170 MA HIGH PRECISION MICRO PUMP FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML/H AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES: 3 NOZZLE NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm COMPATIBLE WITH STANDARD SYRINGE NOZZLES MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML ROTATING COLLECTOR MATERIAL ALUMINUM DIMENSIONS OF THE DRUM: 100 X 220 mm FIBER DEPOSITION AREA: 314 X 220 mm DRUM ROTATING SPEED: 100 TO 500 RPM SURFACE SPEED (CM/S): 52.3 CM/S TO 261.6 CM/S STROKE OF COATING HOMOGENEITY SYSTEM: 30 TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm /SEC STATIONARY PLATE COLLECTOR MATERIAL: STAINLESS STEEL DIMENSIONS OF STATIONARY PLATE 275 X 150 mm UNIQUE USER INTERFACE 4.3" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAFETY FUNCTION EMERGENCY BUTTON HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS. Learn More

REFERENCE NUMBER: A-2471 INDUSTRIAL ELECTROSPINNING MACHINE A MASS PRODUCTION MACHINE OF ELECTROSPINNING. ALUMINUM FRAME STRUCTURE MAKES IT POSSIBLE FOR EXTENDING DIFFERENT FUNCTIONS. THE SPINNERET USED IS MULTI-NEEDLE ARRAYS, FROM 64 TO 384 NEEDLES ARE EQUIPPED. THE LENGTH AND WIDTH CAN BE MADE ACCORDING TO CUSTOMER'S REQUIREMENT. ROLL TO ROLL COLLECTOR AND CONTINUOUS COLLECTOR CAN BE USED BASED ON THE THICKNESS OF REQUIRED FIBER SHEET. FOR SOLUTIONS, A MULTI-CHANNEL PUMP WILL BE SUPPLIED FOR LONG TIME PRODUCTION OR NONE-STOP PRODUCTION. FEATURES: － EQUIPPED WITH BOTH POSITIVE & NEGATIVE HIGH VOLTAGE SUPPLY DEVICES － EQUIPPED WITH UNWINDING & WINDING MACHINES － CONTINUOUS ELECTROSPINNING & WINDING － ALUMINUM ALLOY FRAME STRUCTURE, MULTI-FUNCTIONS EXPANSIBLE － MULTI-NEEDLES IN ARRAYS. 16 NEEDLES X N ROWS, UP TO 384 NEEDLES － SPINNERET MOVING MACHINERY ENSURES EVEN FIBER SHEET － ONLINE AUTO-CLEAN DEVICE FOR NEEDLES － THICKNESS OF THE FIBER SHEET IS CONTROLLABLE － CE & FCC CERTIFICATE SPINNERET STANDARD：16 NEEDLES X 8 GROUPS =128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ADJUSTED FREELY ACCORDING TO THE REQUIREMENTS OF USE） X-Y-Z MOTION SYSTEM － THE NOZZLE CAN BE MOVED UP AND DOWN IN THE Z DIRECTION THROUGH THE TOUCH SCREEN CONTROL TO DETERMINE THE APPROPRIATE SPINNING DISTANCE. － THE NOZZLE CAN MOVE BACK AND FORTH ALONG THE YAXIS DIRECTION OF THE TANGENT DIRECTION OF THE RECEIVING FILM TO PREPARE A UNIFORM FIBER FILM. － THE NOZZLE AUTOMATIC ONLINE CLEANING DEVICE SCANS ALONG THE X-AXIS DIRECTION. COLLECTOR － STAINLESS STEEL PLATE / MESH SERVES AS A CARRIER FOR THE FIBER MEMBRANE SUBSTRATE. － CONNECTED WITH NEGATIVE HIGH VOLTAGE. － RECEIVER BOARD WIDTH: 500 mm － SPINNING DISTANCE: 80 TO 300 mm ADJUSTABLE WINDER AND UNWINDER － AUTOMATICALLY CALCULATE THE ROLL DIAMETER OF THE LOADED MATERIAL AND CONTROL THE TENSION BETWEEN THE UNWINDING AND SPINNING SECTIONS. － CONSTANT FEEDING SPEED. THE FEEDING SPEED RANGE IS 0 TO 5000 mm / min. － ONLINE HOT PRESSING FUNCTION MODULE. AFTER THE SPINNING IS COMPLETED, BEFORE THE WINDING, A TEMPERATURE-CONTROLLED HOT PRESSING DEVICE (ROOM TEMPERATURE TO 60 ° C) IS USED FOR HOT PRESSING. (OPTIONAL THIRD LAYER MATERIAL STICKING AND REWINDING DEVICE). － CAN BE OPERATED BY TOUCH SCREEN. － DO NOT USE METAL FILM AS THE RECEIVING CARRIER. SYRINGE PUMP － 200ML X 4N CHANNEL － FLOW RATE: 0.1ML / H TO 1280 ML / H － SPECIALLY DESIGNED FOR ELECTRO-SPINNING AND RESISTANT TO HIGH VOLTAGE. HIGH VOLTAGE DEVICE －0 TO 50KV, DIGITAL DISPLAY －-50KV ~ 0 KV, DIGITAL DISPLAY －OUTPUT CURRENT: <1 MA －CONTINUOUSLY ADJUSTABLE CONTROL SYSTEM －PLC CONTROL SYSTEM, 7-INCH TOUCH SCREEN. －CONTROL THE MOVEMENT OF THE NOZZLE. －CONTROL THE NOZZLE TO MOVE UP AND DOWN. －YOU CAN SET THE MOVEMENT TIME, STROKE AND SPEED OF THE NOZZLE. －CONTROL THE FREQUENCY OF NOZZLE CLEANING. －SPINNING PROCESS PARAMETER RECORDS. ENVIRONMENTAL CONTROL SYSTEM －PROVIDE INTERFACE TO LET IN DRY AMBIENT HUMIDITY AIR. －AN EXTERNAL DEHUMIDIFIER CAN BE USED TO CONTROL THE AMBIENT HUMIDITY. THE EXTERNAL DEHUMIDIFIER NEEDS TO BE SELECTED ACCORDING TO THE SIZE OF THE WORKSHOP. THIS EQUIPMENT DOES NOT INCLUDE THIS DEHUMIDIFIER. EXHAUST SYSTEM －BOTTOM UP, AND FOUR FANS ARE PUMPED AT THE SAME TIME. －THE DISCHARGE VOLUME OF A SINGLE UNIT IS 5 TO 150 M3 / H, AND THE RATE IS ADJUSTABLE. THE COMBINED DISCHARGE VOLUME OF THE TWO EXHAUST FANS IS 10 TO 300M3 / H. THE EXTRACTOR IS DRAWN FROM THE MIDDLE. IN THIS WAY, THE HIGH-SPEED AIR VENTILATION MINIMIZES THE RELATIVE DISTURBANCE TO THE SPINNING. THE EXHAUST FAN IS A SILENT EXHAUST FAN. SAFETY －AUTOMATIC POWER-OFF DEVICE FOR OPENING THE DOOR. －RESIDUAL STATIC ELECTRICITY REMOVAL DEVICE. －EMERGENCY STOP SWITCH. －GROUND AT MULTIPLE POINTS. －ALARM DEVICE AFTER THE CONTROL PARAMETERS EXCEED THE LIMIT. CHAMBER －THE CHAMBER IS MADE OF ALUMINUM ALLOY FRAME. －THE FRONT AND SIDE WINDOWS OF THE CABINET ARE MADE OF TEMPERED GLASS. －MULTI-POINT TEMPERATURE AND HUMIDITY COLLECTION AND DISPLAY. －THE PROCESS CAN BE OBSERVED WITH THE NAKED EYE. －AIR INLET: HOT AND DRY AIR CAN BE INTRODUCED TO QUICKLY ADJUST THE HUMIDITY INSIDE THE CHAMBER. POWER SOURCE －220 VOLTS AND 50/60 Hz －TOTAL POWER: 10KW NUMBER OF NEEDLES: 128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ARBITRARILY REDUCED ACCORDING TO THE SOLVENT USAGE) FLOW RATE OF EACH NEEDLE: (~ 3ML ± 50%) / HOUR TOTAL FLOW OF THE WHOLE MACHINE: ABOUT (400ML ± 50%) / HOUR SOLUTION CONCENTRATION: 10 TO 20% 8 HOURS SOLUTION PROCESSING CAPACITY: ABOUT (3L ± 50%) / 8 HOURS SOLID CONTENT (WEIGHT OF FIBER PRODUCED): (300G ± 50%) / 8 HOURS ACCORDING TO THE APPROXIMATE PRODUCTION OF FIBER MATERIAL WITH A GRAM WEIGHT OF 2GSM. WINDING AND UNWINDING SPEED: 50M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 25 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 200 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: 600 SQUARE METERS BASED ON THE PRODUCTION OF FIBER MATERIAL WITH A GRAMMAGE OF 0.02G / ㎡, APPROXIMATELY: WINDING AND UNWINDING SPEED: 5000M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 2500 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 20,000 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: ABOUT 60,000 SQUARE METERS Learn More

REFERENCE NUMBER: L-4845
MODEL: 4465
TENSION TESTING OPENING: 48”
COMPRESSION TESTING OPENING: 48”
DISTANCE BETWEEN COLUMNS/SCREWS: 16”
TESTING STROKE: 48”
TABLE SIZE: 16” X 6”
TESTING SPEED: .0004 TO 40 IPM

QUANTITY: 1

Learn More

REFERENCE NUMBER: R-7584

CORGHI DOUBLING WINDER, YEAR 2008 MODEL BE TRAVERSE 6 TO 8 INCHES

 

QUANTITY: 1

Learn More

P-4706 TOYODA FL-100 ROVING FRAMES YEAR 1997 96 and 120 SPINDLES

TOYODA
MODEL: FL-100
ROVING FRAMES
YEAR: 1997
2 SETS WIITH 96 SPINDLES
2 SETS WITH 120 SPINDLES
STAFF (4 SPINDLES); 440mm
FULL BOBBIN DIAMETER: 152mm
LIFT: 406mm
EASY DOFFING DEVICE
DRAFTING SYSTEM: 4-ROLLER DOUBLE APRON D-TYPE
FOR 100% COTTON, COMBED OR CARDED
PROCESSING FIBRE UP TO 38mm, Ne 10-20s
WEIGHTING ARM: SKF-PK1500-001938
SHORT BOTTOM APRON
CRADLE TYPE: SKF OH 514-110
CCRADLE RADIUS: 34.5mm, WIDTH: 40mm
BOTTOM ROLLER = 28.5 (F) x 28.5 (S) x 28.5 (T) x 28.5 (B)
TOP ROLLER SKF
LP 315-110 (F) x LP 315-110 (S) x LP 317-110 (T) x LP 315-110 (B)
DIAMETER OF FLYER SPINDLE, 22mm
LIGHT ALLOW METAL FLYER, SL REINFORCED, SLIT LESS TYPE (FL 100)
SIZE OF FEEDING CAN: 508mm (20 INCHES) x 1321mm (52INCHES) SIZE
SINGLE SILVER FEEDING TYPE
INDICATOR: 3 SHIFTS
CLEARER: POSITIVE INTERMITTENT ROVING CLEARER WITH COMB FOR TOP AND BOTTOM ROLLERS
ELECTRIC CUSHION STARTER CONTROL FOR RUN AND INCHING
AUTOMATIC LUBRICATION FOR FLYER AND BOBBIN GEAR
MACHINE BACK COVER WITH BOBBIN JUMP PREVENTION DEVICE
VOLTAGE: AC 220/60Hz

SPECIAL OPTIONS INCLUDED ARE:
ROVING TENSION CONTROLLER
FLYER SPEED CONTROL BY INVERTOR
MAIN GEARING IN OIL BATH
DRAFT GEARING GREASE
IRREGULAR ROVING [REVENTING DEVICE
PACKAGE SHOULDER COLLAPSE PREVENTING DEVICE
STOP MOTION UPON LENGTH MEASURED SETTING COMPLETION

QUANTITY: 4 SETS

Learn More

S-1166 SEMI-AUTO TIPPING MACHINE, MACHINE DIMENSION 800 X 650 X 900mm

SEMI-AUTO TIPPING MACHINE
IT IS WIDELY USED FOR TIPPING CORDS, SHOELACES, ROPES ETC
IT IS EASY TO PRODUCE DIFFERENT SIZES OF SHOELACE BY CHANGING THE GEAR
ADOPTING FREQUENCY CONTROL
OUR MACHINES POSSESS AUTO-STOP SYSTEM
WRAPPING CENTER YARN FEEDING SYNCHRONOUSLY
AND THAT CAN ACHIEVE LOW WASTE AND HIGH PRODUCTIVITY
WITH HIGH QUALITY WORK AND REASONABLE STRUCTURES
IT RUNS STABLY IN LONG LIFETIME
WITH GOOD DESIGNATION
EASY AND SECURITY OPERATION
THE MAINTENANCE OF IT IS EASY AND CONVENIENT
ADOPTING FREQUENCY CONTROL MOTOR IS EASY TO CONTROL THE SPEED
AND PROTECT THE LOAD
HANGING INDUSTRIAL CERAMIC EYELETS AT THE YARN OFF-TRACK POINT TO INSTEAD PERFORATION WORK AND IT IS EASY TO CHANGE THE BOBBIN
AND ADJUST THE SPRING FOR THE USING OF NEW TYPE SPINDLE
SEMIAUTOMATIC TIPPING MACHINE:
VOLTAGE: 220VAC, SINGLE PHASE, 50HZ, 0.75KW
OUTPUT CAPACITY: 40 PIECES/MIN
MACHINE WEIGHT: 160 KGS
MACHINE DIMENSION: 800 X 650 X 900mm

QUANTITY: 1

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: G-8894 JAEGGLI YARN MERCERIZING MACHINE YEAR 2000 HANKS MERCERIZING MACHINE WITH MOVING TANK MAKER: JAEGGLI MODEL: HL2000 YEAR 2000 TWO COMPARTMENTS WITH CAUSTIC SODA AND TWO COMPARTMENTS FOR WASH WATER COLLECTION EACH MACHINE PRODUCES ABOUT 100 KG/H OF YARN SKEINS 1KG/CAD. FOR A TOTAL OF 800KG PER SHIFT INCLUDES: AUTOLOADERS HYDRAULIC SYSTEM SHOT WITH VARIABLE FLOW CONTROL, WITH 4 PISTONS FIRING CONTROL WITH ENCODER QUANTITY AVAILABLE: 1 Learn More