Search results for: 'Air''

REFERENCE NUMBER: A-2472 INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT MACHINE HAS A HIGH PRODUCTION CAPACITY. IT ALSO ENABLES EASY MONITORING AND MANAGEMENT OF ALL PARAMETERS THAT ARE EFFECTIVE IN THE PRODUCTION OF NANOFIBERS. FOR THE COMMERCIAL PRODUCTION, REPEATABLE PRODUCTION OF MATERIALS IN UNIFORM AND SPECIFIC STANDARDS HAS THE HIGHEST IMPORTANCE. MACHINE IS EQUIPPED WITH 132 ELECTROSPINNING NEEDLES AND A HOMOGENIZATION SYSTEM, ALLOWING THE SURFACE TO BE UNIFORMLY AND CONTINUOUSLY AT A WIDTH OF 1 METER. BECAUSE OF ITS ADVANCED AUTOMATION SYSTEM AND THE AIR CONDITIONING EQUIPMENT, IT ENABLES CONTINUOUS PRODUCTION AT THE HIGHEST SET QUALITY EVEN UNDER CHANGING ENVIRONMENTAL CONDITIONS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 600 KGS DIMENSIONS: 3650 x 1950 X 1940 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: IN THE SPINNERET 0-(+)60 KV VOLTAGE PRECISION: 0.1 KV MAXIMUM CURRENT: 3 MA PUMP SYSTEM FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML CONTINUES FEEDING PUMP SYSTEM FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 33 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 132 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: STANDARD NOZZLE: 0.8 mm (DIFFERENT DIAMETERS CAN BE USED) MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 25 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 150 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 50 mm TO 350 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 1000 mm SUBSTRATE WINDING SPEED: MAX. 0,1 M/ min TO MIN. 10 M/ min COATING HOMOGENEITY SYSTEM: X-AXIS STROKE OF COATING HOMOGENEITY SYSTEM: 30 mm TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12” TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 Hz @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 5000 X 3000 mm Learn More

P-4950 COMPLETE SPINNING PLANT – ZINSER – RIETER – FOR FIREPROOF THREAD

THIS SPINNING PLANT WAS COMPLETELY MODERNIZED IN 2008
PREPARED TO WORK FIREPROOF THREAD
THIS PLANT IS COMPLETED WITH ALL ITS MECHANISMS TO OPERATE AT THE TIME
HAS A MOISTURE CONDITIONER FOR THE ENTIRE FACTORY WITH WATER FILTERS AND DIFFERENT COMPARTMENTS WITH APPROXIMATELY 20M LONG AND 4M WIDE
IT ALSO HAS 2 CHAMBERS FOR DRYING THE YARN
THE PRODUCTION THICK YARNS TYPES AND TYPES OF MATERIAL THAT CAN WORK THIS SPINNING.
THE RELATIONSHIPS OF THE MACHINES:
1 BOILER VYC 12 BAR.
1 AUTOCLAVE TAINOX
1 ELECTRIC INDUSTRIAL SCALES
1 OPENING (RIETER)
1 CARDING RIETER
1 CARDING RIETER
1 DRAWING FRAME (24)
1 ROVING FRAME (24)
5 SPINNING FRAME G/01, ZINSER. (118X2 UNIT)
1 SPINNING FRAME G/01, RIETER (108X2 UNIT)
1 AUTOMATIC SCHLAFHORST AUTOCONER. ( 40 )
1 CENTRAL TEMPERATURE / HUMIDITY OF APPROX 20 M X 4 M.
2 CABINS DRYING.
1 FULL LAVORATORIO
2 COMPRESSORS (25 AND 30 HP)
1 DRYER
1 DEPOSIT OF AIR,
*ALL ACCESSORIES IN THE FACTORY.
STOCK ALSO NO THREAD IN LYCRA, ALSO MATERIALS IN BALES

QUANTITY: 1 COMPLETE PLANT

Learn More

P-3551 SCHLAFHORST 238-147-RM AUTOWINDER YEAR 1996

SCHLAFHORST
MODEL: 238-147-RM
AUTOWINDER
YEAR: 1996
MACHINE HAND: 1 x RHS, 1 x LHS
NUMBER OF DRUMS: 60
YARN CLEARER MAKE: LOEPFE YARN MASTER SPECTRA
MEASURING HEAD TYPE: TK740
DRUM TURNS: 2.5
TRAVERSE: 6 INCHES
WAXING: AVAILABLE
CONICITY: 5°57'
EMPTY TUBE CONVEYOR: AVAILABLE
PACKAGE CONVEYOR: AVAILABLE
SUCTION: INDIVIDUAL
HOT AIR DISCHARGE: DOWNWARD
OHTC: AVAILABLE
OHTC MAKE: LUWA
SUCTION MOTOR KILOWATTS: 10 KILOWATTS
INVERTER: AVAILABLE
VOLTAGE: 380
FREQUENCY: 50
MATERIAL PROCESS: COTTON
SPLICER: DZ3
TYPE OF FEED: MAGAZINE
LENGTH MEASURING: AVAILABLE
DRUM TYPE: STEEL

QUANTITY: 2

Learn More

P-5032 RIETER G30 RING FRAME WITH AUTODOFFER YEAR 1997 960 SPINDLES

RIETER
MODEL: G30
RING FRAME
YEAR: 1997
DOFFING: AUTOMATIC
NUMBER OF SPINDLES PER MACHINE: 960
SPINDLE GUAGE: 70mm
BOBBIN LENGTH: 210mm
DRAFTING MAKE: RIETER
DRAFTING TYPE: P3-1
CRADEL SIZE: SHORT – 36mm
TOP CLEARER ROLLER: NOT AVAILABLE
BOTTOM CLEARER ROLLER: NOT AVAILABLE
RING DIAMETERIN mm: 27/27/27
RING DIAMETER: 42mm
RING FLANGE: ONE
SPINDLE TYPE: PLUG
SPINDLE WHARVE: 21
SPINDLE DRIVE: 4 SPINDLE DRIVE
ABC RING: AVAILABLE
NUMBER OF CREEL ROWS: 5
TYPE OF GRIPPER: OUTER
YARN CUTTING: SPINDLE
BOBBIN CONVEYING: PEG TRAY
OHTC: AVAILABLE
OHTC MAKE: OTHER
INVERTER: AVAILABLE
EXHAUST AIR: DOWNWARDS
VOLTAGE: 440
FREQUENCY: 50

QUANTITY: 5

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-3238 COMPLETE RING SPINNING PLANT 24,500 SPINDLES YEAR 1990 TO 1998 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2486 VOLKMANN VTS 07-0 5.10 TWISITNG MACHINE YEAR 1995 & 1996 160 SPINDLES VOLKMANN TYPE: VTS 07-0 5.10 TWISTING MACHINE YEAR: 1995 & 1996 160 SPINDLES EACH FEEDING TUBES LENGTH 250mm CAN DIAMETER 128mm OUTPUT 6 INCHES 4 DEGREES 20 FEET GUAGE 225mm AIR THREADING DEVICE WITH NEW ELECTRONIC MOTORS 240 VOLTS QUANTITY AVAILABLE: 5 Learn More

REFERENCE NUMBER: C-2567 MURATA TWO FOR ONE 373 WITH 120 SPINDLES, POT DIAMETER 185mm, YEAR 1989 DETAILS: MURATA TWO FOR ONE TYPE: 373 FOR THICK YARN TWIST YEAR: 1989 QUANTITY AVAILABLE: 24 Learn More

REFERENCE NUMBER: C-2556 RIETER G33 RINGFRAME LINKED TO SAVIO ORION I WINDER WITH 1200 SPINDLES, YEAR 2000 DETAILS: SUITABLE FOR RING DENIM RIETER G33 RINGFRAME YEAR: 2000 NUMBER OF SPINDLES: 1200 SPINDLE GAUGE: 75mm LINKED TO: SAVIO ORION I WINDER YEAR: 2000 NUMBER OF DRUMS: 24 QUANTITY AVAILABLE: 18 Learn More

REFERENCE NUMBER: C-2506 MURATA MACHCONER WINDER MACHINE TYPE 7-5 WITH 60 SPINDLES SPECIFICATIONS: MURATA MACHCONER WINDER MACHINE TYPE 7-5 YEAR: 2000 NOS OF SPINDLES: 60 QUANTITY AVAILABLE: 5 Learn More