Search results for: 'pro+4+pro'

P-4950 COMPLETE SPINNING PLANT – ZINSER – RIETER – FOR FIREPROOF THREAD

THIS SPINNING PLANT WAS COMPLETELY MODERNIZED IN 2008
PREPARED TO WORK FIREPROOF THREAD
THIS PLANT IS COMPLETED WITH ALL ITS MECHANISMS TO OPERATE AT THE TIME
HAS A MOISTURE CONDITIONER FOR THE ENTIRE FACTORY WITH WATER FILTERS AND DIFFERENT COMPARTMENTS WITH APPROXIMATELY 20M LONG AND 4M WIDE
IT ALSO HAS 2 CHAMBERS FOR DRYING THE YARN
THE PRODUCTION THICK YARNS TYPES AND TYPES OF MATERIAL THAT CAN WORK THIS SPINNING.
THE RELATIONSHIPS OF THE MACHINES:
1 BOILER VYC 12 BAR.
1 AUTOCLAVE TAINOX
1 ELECTRIC INDUSTRIAL SCALES
1 OPENING (RIETER)
1 CARDING RIETER
1 CARDING RIETER
1 DRAWING FRAME (24)
1 ROVING FRAME (24)
5 SPINNING FRAME G/01, ZINSER. (118X2 UNIT)
1 SPINNING FRAME G/01, RIETER (108X2 UNIT)
1 AUTOMATIC SCHLAFHORST AUTOCONER. ( 40 )
1 CENTRAL TEMPERATURE / HUMIDITY OF APPROX 20 M X 4 M.
2 CABINS DRYING.
1 FULL LAVORATORIO
2 COMPRESSORS (25 AND 30 HP)
1 DRYER
1 DEPOSIT OF AIR,
*ALL ACCESSORIES IN THE FACTORY.
STOCK ALSO NO THREAD IN LYCRA, ALSO MATERIALS IN BALES

QUANTITY: 1 COMPLETE PLANT

Learn More

P-4920 SSM DP3 C DIGICONE PRECIFLEX AIR COVERING YEAR 2012 40 POSITIONS

SSM
TYPE: DP3 C DIGICONE PRECIFLEX
AIR COVERING
YEAR: 2012
MECHANICAL SPEED UP TO 1200m/min
PACKAGE SHAPE PROGRAMMABLE THIS MOMENT
LENGTH: 2900mm
JET HEBERLEIN
40 POSITIONS
SUPERIOR CREEL FOR BOBBINS
INDIVIDUALLY CONTROLLED ELECTRONIC SINGLE DRIVES
INSTALLED POWER 500W FOR SPINDLE
AIR COVERING 6 BARS TO 10 BARS OF THE JET
ALL POSITIONS RUNNING

QUANTITY: 1

Learn More

S-1162 TWISTED ROPE MAKING MACHINE, ROPE RANGE 3 TO 6mm

TWISTED ROPE MACHINE
MODEL: TM-M22
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
PRODUCE 3 STRAND OR 4 STRAND ROPE
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 3 TO 6mm
LAY RANGE: 18 TO 30mm
POWER: 1.5KW
TAKE-UP CAPACITY: Φ130XΦX350ΦX255mm
OUTPUT KG/24H: 4/5
6/100
160/300
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 4
MACHINE SIZE: 2000 X 950 X 1200mm

QUANTITY: 1

Learn More

S-1161 TWISTED ROPE MAKING MACHINE, ROPE RANGE 6 TO 14mm

TWISTED ROPE MACHINE
MODEL: TM-M44
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 6 TO 14mm
LAY RANGE: 20 TO 50mm
POWER: 7.5KW
TAKE-UP CAPACITY: Φ130XΦ600XΦ430mm
OUTPUT KG/24H: 8/10
12/640
1100/1600
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 20X4 OR 20X3
MACHINE SIZE: 7700 X 2300 X 2200mm

QUANTITY: 1

Learn More

S-1160 TWISTED ROPE MAKING MACHINE, ROPE RANGE 12 TO 20mm

TWISTED ROPE MACHINE
MODEL: TM-M55
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 12 TO 20mm
LAY RANGE: 32 TO 78mm
POWER: 11KW
TAKE-UP CAPACITY: Φ130XΦ660XΦ400mm
OUTPUT KG/24H: 12/14
18/1600
1840/3000
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 32X4 OR 32X3
MACHINE SIZE: 9000 X 2200 X 2300mm

QUANTITY: 1

Learn More

S-1159 TWISTED ROPE MAKING MACHINE, ROPE RANGE 20 TO 26mm

TWISTED ROPE MAKING MACHINE
MODEL: TM-M66
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 20 TO 26mm
LAY RANGE: 40 TO 105mm
POWER: 18.5KW
TAKE-UP CAPACITY: Φ140XΦ700XΦ450mm
OUTPUT KG/24H: 18/22
24/3000
3700/4000
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 20X4 OR 20X3
MACHINE SIZE: 12000 X 2300 X 2200mm

QUANTITY: 1

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2378 SAVIO POLAR E PREMIUM AUTO CONER YEAR 2014 – WITH 72 POSITIONS SAVIO TYPE: POLAR E PREMIUM YEAR: 2014 72 DRUMS / SET QUANTITY AVAILABLE: 2 SETS Learn More

REFERENCE NUMBER: G-2023 OPEN END SPINNING PLANT FOR SALE: INCLUDING TWISTING DEPARTMENT FOR THE PRODUCTION OF COARSE COTTON YARNS (TWISTED) BLOWROOM FOR COTTON, TRUTZSCHLER, YEAR 2004 CARDING TRUTZSCHLER 2004 DRAWING TRUTZSCHLER 2004 SPINNING SCHLAFHORST TWISTING STEAMING XORELLA 2004 AIR CONDITIONING MARTEL 2004 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-2167 MICROFIBER OPENING AND FILLING MACHINE FOR PILLOWS AND CUSHIONS MODEL: 1001-1000M POWER: 11.8 KW DIMENSIONS: 4350mm LENGTH x 1800 mm WIDTH x 2370 mm HEIGTH (14FT x 72" x 93") QUANTITY AVAILABLE: 1 Learn More