Search results for: 'for'

V-1449 RIETER E65 COMBERS WITH RIETER E32 LAP FORMER, YEAR 2006

(4) X RIETER E65 COMBING MACHINES
MAKE: RIETER
MODEL: E65
YEAR: 2006
QUANTITY: 4
NO.OF DELIVERIES: SINGLE
NO OF DOUBLING: 8
MATERIAL PROCESSED: COTTON
TROLLEYS AVAILABLE: 8
UNICOMB MAKE: GRAF
TOP COMB MAKE: GRAF
EXHAUST/WASTE SUCTION: UPWARDS
SPOOL DIAMETER: 200 mm SPOOL WIDTH: 300 mm
UNICOMB TYPE: PRIMA COMB 8015
TOP COMB TYPE: 2026
DIAMETER AND HEIGHT OF CAN: 24" X 47"
SPARE SPOOLS: 50 SPOOLS AND 6 TROLLEYS
THEY DO NOT HAVE INDIVIDUAL HEAD MONITORING
THEY HAVE ON LIGHT BARRIER TO MONITOR 8 HEADS
QUANTITY: 4

(1) X RIETER E32 LAP FORMER MACHINE
MAKE: RIETER
MODEL: E32
YEAR: 2006
NUMBER OF TROLLEYS: 16
NUMBER OF DOUBLINGS SLF: 32
QUANTITY: 1

Learn More

REFERENCE NUMBER: YY-1365 CONTINUOUS PRODUCTION LINE FOR IMPREGNATION, DRYING, ABRASIVE SPRAY, HEAT-SETTING OF SYNTHETIC FIBERS FOR ABRASIVE WADDINGS, WITH AIRLAY CARDING MACHINE AND FIBER PREPARATION DETAILS: MAIN FEATURES: - THREE LAYERS OVEN: TWO UPPER DRYING LAYERS WITH LENGTH OF 6+ 6 METERS; ONE LOWER CURING LAYER WITH A LENGTH OF 6 METERS; - HEATING: BY DIRECT HEATING WITH AUTOMATIC BURNERS; - CONVEYOR WIDTH: 2200mm; - WORKING WIDTH: 2000mm; - MAX DRYING AND POLYMERISATION TEMPERATURE: 230°C; - HEATING POWER: 4 BURNERS 350 KW EACH ONE, ABOUT TOTAL 1.400 KW; - VENTILATION: SEMI-CLOSED SYSTEM WITH 4 CENTRIFUGAL VENTILATORS; - ADJUSTABLE CONVEYOR SPEED BY A.C. MOTORS; - INSTALLED ELECTRIC POWER: 200 KW. APPROX.; - MECHANICAL SPEED: 2÷15 METERS PER MINUTE; - CONVEYOR DRIVING: BY A.C. MOTORS; - MANUFACTURED ARTICLE: SYNTHETIC FIBERS ABRASIVE WADDING. Learn More

REFERENCE NUMBER: A-2471 INDUSTRIAL ELECTROSPINNING MACHINE A MASS PRODUCTION MACHINE OF ELECTROSPINNING. ALUMINUM FRAME STRUCTURE MAKES IT POSSIBLE FOR EXTENDING DIFFERENT FUNCTIONS. THE SPINNERET USED IS MULTI-NEEDLE ARRAYS, FROM 64 TO 384 NEEDLES ARE EQUIPPED. THE LENGTH AND WIDTH CAN BE MADE ACCORDING TO CUSTOMER'S REQUIREMENT. ROLL TO ROLL COLLECTOR AND CONTINUOUS COLLECTOR CAN BE USED BASED ON THE THICKNESS OF REQUIRED FIBER SHEET. FOR SOLUTIONS, A MULTI-CHANNEL PUMP WILL BE SUPPLIED FOR LONG TIME PRODUCTION OR NONE-STOP PRODUCTION. FEATURES: － EQUIPPED WITH BOTH POSITIVE & NEGATIVE HIGH VOLTAGE SUPPLY DEVICES － EQUIPPED WITH UNWINDING & WINDING MACHINES － CONTINUOUS ELECTROSPINNING & WINDING － ALUMINUM ALLOY FRAME STRUCTURE, MULTI-FUNCTIONS EXPANSIBLE － MULTI-NEEDLES IN ARRAYS. 16 NEEDLES X N ROWS, UP TO 384 NEEDLES － SPINNERET MOVING MACHINERY ENSURES EVEN FIBER SHEET － ONLINE AUTO-CLEAN DEVICE FOR NEEDLES － THICKNESS OF THE FIBER SHEET IS CONTROLLABLE － CE & FCC CERTIFICATE SPINNERET STANDARD：16 NEEDLES X 8 GROUPS =128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ADJUSTED FREELY ACCORDING TO THE REQUIREMENTS OF USE） X-Y-Z MOTION SYSTEM － THE NOZZLE CAN BE MOVED UP AND DOWN IN THE Z DIRECTION THROUGH THE TOUCH SCREEN CONTROL TO DETERMINE THE APPROPRIATE SPINNING DISTANCE. － THE NOZZLE CAN MOVE BACK AND FORTH ALONG THE YAXIS DIRECTION OF THE TANGENT DIRECTION OF THE RECEIVING FILM TO PREPARE A UNIFORM FIBER FILM. － THE NOZZLE AUTOMATIC ONLINE CLEANING DEVICE SCANS ALONG THE X-AXIS DIRECTION. COLLECTOR － STAINLESS STEEL PLATE / MESH SERVES AS A CARRIER FOR THE FIBER MEMBRANE SUBSTRATE. － CONNECTED WITH NEGATIVE HIGH VOLTAGE. － RECEIVER BOARD WIDTH: 500 mm － SPINNING DISTANCE: 80 TO 300 mm ADJUSTABLE WINDER AND UNWINDER － AUTOMATICALLY CALCULATE THE ROLL DIAMETER OF THE LOADED MATERIAL AND CONTROL THE TENSION BETWEEN THE UNWINDING AND SPINNING SECTIONS. － CONSTANT FEEDING SPEED. THE FEEDING SPEED RANGE IS 0 TO 5000 mm / min. － ONLINE HOT PRESSING FUNCTION MODULE. AFTER THE SPINNING IS COMPLETED, BEFORE THE WINDING, A TEMPERATURE-CONTROLLED HOT PRESSING DEVICE (ROOM TEMPERATURE TO 60 ° C) IS USED FOR HOT PRESSING. (OPTIONAL THIRD LAYER MATERIAL STICKING AND REWINDING DEVICE). － CAN BE OPERATED BY TOUCH SCREEN. － DO NOT USE METAL FILM AS THE RECEIVING CARRIER. SYRINGE PUMP － 200ML X 4N CHANNEL － FLOW RATE: 0.1ML / H TO 1280 ML / H － SPECIALLY DESIGNED FOR ELECTRO-SPINNING AND RESISTANT TO HIGH VOLTAGE. HIGH VOLTAGE DEVICE －0 TO 50KV, DIGITAL DISPLAY －-50KV ~ 0 KV, DIGITAL DISPLAY －OUTPUT CURRENT: <1 MA －CONTINUOUSLY ADJUSTABLE CONTROL SYSTEM －PLC CONTROL SYSTEM, 7-INCH TOUCH SCREEN. －CONTROL THE MOVEMENT OF THE NOZZLE. －CONTROL THE NOZZLE TO MOVE UP AND DOWN. －YOU CAN SET THE MOVEMENT TIME, STROKE AND SPEED OF THE NOZZLE. －CONTROL THE FREQUENCY OF NOZZLE CLEANING. －SPINNING PROCESS PARAMETER RECORDS. ENVIRONMENTAL CONTROL SYSTEM －PROVIDE INTERFACE TO LET IN DRY AMBIENT HUMIDITY AIR. －AN EXTERNAL DEHUMIDIFIER CAN BE USED TO CONTROL THE AMBIENT HUMIDITY. THE EXTERNAL DEHUMIDIFIER NEEDS TO BE SELECTED ACCORDING TO THE SIZE OF THE WORKSHOP. THIS EQUIPMENT DOES NOT INCLUDE THIS DEHUMIDIFIER. EXHAUST SYSTEM －BOTTOM UP, AND FOUR FANS ARE PUMPED AT THE SAME TIME. －THE DISCHARGE VOLUME OF A SINGLE UNIT IS 5 TO 150 M3 / H, AND THE RATE IS ADJUSTABLE. THE COMBINED DISCHARGE VOLUME OF THE TWO EXHAUST FANS IS 10 TO 300M3 / H. THE EXTRACTOR IS DRAWN FROM THE MIDDLE. IN THIS WAY, THE HIGH-SPEED AIR VENTILATION MINIMIZES THE RELATIVE DISTURBANCE TO THE SPINNING. THE EXHAUST FAN IS A SILENT EXHAUST FAN. SAFETY －AUTOMATIC POWER-OFF DEVICE FOR OPENING THE DOOR. －RESIDUAL STATIC ELECTRICITY REMOVAL DEVICE. －EMERGENCY STOP SWITCH. －GROUND AT MULTIPLE POINTS. －ALARM DEVICE AFTER THE CONTROL PARAMETERS EXCEED THE LIMIT. CHAMBER －THE CHAMBER IS MADE OF ALUMINUM ALLOY FRAME. －THE FRONT AND SIDE WINDOWS OF THE CABINET ARE MADE OF TEMPERED GLASS. －MULTI-POINT TEMPERATURE AND HUMIDITY COLLECTION AND DISPLAY. －THE PROCESS CAN BE OBSERVED WITH THE NAKED EYE. －AIR INLET: HOT AND DRY AIR CAN BE INTRODUCED TO QUICKLY ADJUST THE HUMIDITY INSIDE THE CHAMBER. POWER SOURCE －220 VOLTS AND 50/60 Hz －TOTAL POWER: 10KW NUMBER OF NEEDLES: 128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ARBITRARILY REDUCED ACCORDING TO THE SOLVENT USAGE) FLOW RATE OF EACH NEEDLE: (~ 3ML ± 50%) / HOUR TOTAL FLOW OF THE WHOLE MACHINE: ABOUT (400ML ± 50%) / HOUR SOLUTION CONCENTRATION: 10 TO 20% 8 HOURS SOLUTION PROCESSING CAPACITY: ABOUT (3L ± 50%) / 8 HOURS SOLID CONTENT (WEIGHT OF FIBER PRODUCED): (300G ± 50%) / 8 HOURS ACCORDING TO THE APPROXIMATE PRODUCTION OF FIBER MATERIAL WITH A GRAM WEIGHT OF 2GSM. WINDING AND UNWINDING SPEED: 50M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 25 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 200 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: 600 SQUARE METERS BASED ON THE PRODUCTION OF FIBER MATERIAL WITH A GRAMMAGE OF 0.02G / ㎡, APPROXIMATELY: WINDING AND UNWINDING SPEED: 5000M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 2500 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 20,000 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: ABOUT 60,000 SQUARE METERS Learn More

R-6808  SSM PRECIFLEX DP-Y WINDER YEAR 1998 TO 1999 – WITH 25 POSITIONS

SSM WINDER PRECIFLEX DP-Y
YEAR 1999 TO 1998
25 POSITIONS
CLEARER USTER QUANTUM 3 (FOREIGN FIBRE)
WAXING
LUWA PNEUMABLO OVERHEAD BLOWER  

Learn More

A-2100 MURATA VORTEX SPINNING MVS870, YEAR 2001, 96 SPINDLES, 50 HZ

MODEL: MVS870
YEAR: 2011
VOLTAGE: 380V / 50 Hz
96 SPINDLES
(1) LEFT HAND WITH PACKAGE CONVEYOR
RIGHT TO LEFT, WITH PACKAGE LIFTER
(1) RIGHT HAND WITH PACKAGE CONVEYOR
LEFT TO RIGHT, WITH PACKAGE LIFTER
YARN CLEARER
MSC-F (WITH FOREIGN FIBERS DETECTION
PACKAGE: 6” PARALLEL
WAXING DEVICE
1 SET OF ORIENT NOZZLES – Z TWIST/MACHINE
1 SET OF ORIENT NEEDLE HOLDERS/MACHINE
1 SET OF ORIENT MIDDLE SPINDLES/MACHINE
1 SET OF ORIENT FINE SPINDLES/MACHINE
3 SPLICING CARRIAGES/MACHINE
1 AUTODOFFER/MACHINE
AUTOMATIC WASTE FIBER EXTRACTION
OVERHEAD BLOW CLEANER/MACHINE

QUANTITY: 2

Learn More

V-1042 RIETER SPINNING PLANT OF ABOUT 20,500 SPINDLES

01 X RIETER A10 UNIFLOC, YEAR 1998, LENGTH 38 METERS
01 X RIETER B2/5 WASTE FEEDER, YEAR 1998
01 X RIETER B11 UNICLEAN, YEAR 1998
01 X RIETER B7/3 UNIMIX, YEAR 1998
01 X RIETER B60 UNIMIX, YEAR 1998
02 X JOSSI FOREIGN FIBER DETECTORS, ED-33-1200-1 YEAR 2002
02 X RIETER A20+A21 CONDENSER, YEAR 2002
01 X RIETER B11 UNICLEAN, YEAR 2002
01 X RIETER B7/3 UNIMIX, YEAR 2002
01 X RIETER B60 UNIMIX, YEAR 2002

06 X RIETER C51 CARDS, YEAR 1998
11 X RIETER C51 CARDS, YEAR 2002
AUTOMATIC COILER
CAN SIZE: 600 MM X 1200 MM

02 X RIETER SB-D10 DRAW FRAMES, YEAR 1998
02 X RIETER RSB-D30 DRAW FRAMES, YEAR 1998
03 X RIETER SB-D15 DRAW FRAMES, YEAR 2002
04 X RIETER RSB-D35 DRAW FRAMES, YEAR 2002

01 X RIETER E32 UNILAP, YEAR 2002
05 X RIETER E62 COMBERS, YEAR 2002
01 X KAIGON UNILAP 2, YEAR 2012
06 X RIETER E7/5 COMBERS, YEAR 1987

04 X RIETER F10 ROVING FRAMES, YEAR 1998, 120 POSITIONS
03 X RIETER F11 ROVING FRAMES, YEAR 2002, 144 POSITIONS

08 X RIETER G33 RING FRAMES, YEAR 1998, 1104 SPINDLES, DIAM. 42 MM, GAUGE 70 MM, TUBES 210 MM, DRAFTINGS P3-1
10 X RIETER G33 RING FRAMES, YEAR 2002, 1200 SPINDLES, DIAM. 40 MM, GAUGE 70 MM, TUBES 200 MM, DRAFTINGS P3-1

04 X SCHLAFHORST AC 238 WINDERS, YEAR 1998, 60 SPINDLES
04 X MURATA 21F MURATEC WINDERS, YEAR 2002, 60 SPINDLES
AUTOMATIC FEEDING
USTER QUANTUM IMK-C20-F20 CLEARERS
5.57 CONICITY
WAXING

Learn More

R-1729 USTER TESTER 5 S400 VERSION, YEAR 2012

USTER TESTER 5 S400 VERSION
YEAR: 2012
BASIC MODULE FOR U%
CV% HAIRINESS MODULE CONVEYOR
MODULE FOREIGN MATTER MODULE
WITH KEYBOARD
LCD MONITOR AND COMPUTER SYSTEM

QUANTITY: 1

Learn More

R-1492 MURATA 21C WITH 60 SPINDLES, YEAR 2008

MURATA 21C
YEAR: 2008
SPINDLES: 60
WITH QUANTUM 2 CLEANER
WITH FOREIGN FIBER DETECTION CHANNEL AND WAXING
YARN SPLICER G2
9 YARN HOUSE
FOR COTTON FABRIC

QUANTITY: 20 SETS

Learn More

P-4526 MURATA WINDER MACHINE YEAR 2003 to 2004 60 SPINDLES, MODEL 21C

MURATA
TYPE: 21C
YEAR: 2003 to 2004
60 SPINDLES
WITH QUANTUM 1 CLEANER
YARN SPLICER G21
WITH AUTO DOFFER
WITH FOREIGN FIBER DETECTION CHANNEL

QUANTITY: 1 SET

Learn More

P-4350 MURATA 21C YEAR 2007 to 2010 60 SPINDLES

MURATA
TYPE: 21C
YEAR: 2007 to 2010
60 SPINDLES
WITH QUANTUM 2 CLEANER
YARN HOUSE 9
YARN SPLICER G2
WITH FOREIGN FIBER DEFECTION CHANNEL
WAXING
CONICITY: 5’57
DISMANTLED IN WAREHOUSE

QUANTITY: 1 SET

Learn More