Search results for: 'conditio'

REFERENCE NUMBER: A-2472 INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT MACHINE HAS A HIGH PRODUCTION CAPACITY. IT ALSO ENABLES EASY MONITORING AND MANAGEMENT OF ALL PARAMETERS THAT ARE EFFECTIVE IN THE PRODUCTION OF NANOFIBERS. FOR THE COMMERCIAL PRODUCTION, REPEATABLE PRODUCTION OF MATERIALS IN UNIFORM AND SPECIFIC STANDARDS HAS THE HIGHEST IMPORTANCE. MACHINE IS EQUIPPED WITH 132 ELECTROSPINNING NEEDLES AND A HOMOGENIZATION SYSTEM, ALLOWING THE SURFACE TO BE UNIFORMLY AND CONTINUOUSLY AT A WIDTH OF 1 METER. BECAUSE OF ITS ADVANCED AUTOMATION SYSTEM AND THE AIR CONDITIONING EQUIPMENT, IT ENABLES CONTINUOUS PRODUCTION AT THE HIGHEST SET QUALITY EVEN UNDER CHANGING ENVIRONMENTAL CONDITIONS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 600 KGS DIMENSIONS: 3650 x 1950 X 1940 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: IN THE SPINNERET 0-(+)60 KV VOLTAGE PRECISION: 0.1 KV MAXIMUM CURRENT: 3 MA PUMP SYSTEM FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML CONTINUES FEEDING PUMP SYSTEM FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 33 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 132 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: STANDARD NOZZLE: 0.8 mm (DIFFERENT DIAMETERS CAN BE USED) MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 25 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 150 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 50 mm TO 350 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 1000 mm SUBSTRATE WINDING SPEED: MAX. 0,1 M/ min TO MIN. 10 M/ min COATING HOMOGENEITY SYSTEM: X-AXIS STROKE OF COATING HOMOGENEITY SYSTEM: 30 mm TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12” TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 Hz @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 5000 X 3000 mm Learn More

FADIS ITALY SYNCRO M HANKING MACHINE
YEAR 2009
MUFF MACHINE 50 POSITIONS TOTAL (1 MC = 35 POS) (2ND MC = 15 POS)
BOBBIN TO HANK / MUFF WINDING
POSSIBILITY TO EXTEND 20 POSITIONS MORE
EITHER BOBBIN-TO-HANK OR HANK-TO-CONE 1-1.200 M/MIN
EACH POSITION WORKS WITH METERED QUANTITY
EACH POSITION CAN RUN A DIFFERENT YARN
TRANSPORT - FIT IN 2 X 40 FT CONTAINERS EXCELLENT CONDITION
(ALL POSITIONS ARE WORKING PERFECTLY, LAST FADIS MAINTENANCE IN 11/2016)

QUANTITY: 2

Learn More

YEAR: 1999
MODEL: DP2/C
30 POSITIONS
HEBERLEIN JET TYPE P212
FINAL BOBBIN 290mm
SUPERIOR CREEL
OIL DEVICE
IN RUNNING CONDITION

QUANTITY: 1

Learn More

RINGS AND FLYER HAVE A TRANSPORTER SYSTEM (IN BETWEEN),SO THEY WILL BE SOLD TOGETHER
TOYOTA RING MACHINE MODEL: RX-220
RING DIAMETER: 42mm
960 SPINDLES, 24 SPINNERS
23 SPINNING MACHINES HAVE 42mm RINGS
ONE SPINNING MACHINE HAS A 48mm RING
SPINNING GAUGE IS BETWEEN 44 AND 78mm

TOYOTA FLYERS (6 MACHINES)
MODEL:FL-100
120 SPINDLES

TRUTZSCHLER CARDING MACHINES
DK-760
AUTOMATIC CAN CHANGER (1000 X 1200mm)

MURATEC WINDING MACHINE
MODEL: NO 7-V
3 WITH USTER QUANTUM CLEARER

6 WITH KEISOKKI CLEANERS
SCHLAFHORST WINDING MACHINES
MODEL: X-6
YEAR: 2014

TRUTZSCHLER BLOWROOM IS TWO LLINES

WITH FILTER AND AIR CONDITIONER

QUANTITY: 1

Learn More

P-5274 SSM DP3-C WINDER YEAR 2011

SSM
MODEL: DP3-C
WINDER
YEAR: 2011
NUMBER OF HEADS: 40
RUNNING CONDITION

QUANTITY: 1

Learn More

P-4950 COMPLETE SPINNING PLANT – ZINSER – RIETER – FOR FIREPROOF THREAD

THIS SPINNING PLANT WAS COMPLETELY MODERNIZED IN 2008
PREPARED TO WORK FIREPROOF THREAD
THIS PLANT IS COMPLETED WITH ALL ITS MECHANISMS TO OPERATE AT THE TIME
HAS A MOISTURE CONDITIONER FOR THE ENTIRE FACTORY WITH WATER FILTERS AND DIFFERENT COMPARTMENTS WITH APPROXIMATELY 20M LONG AND 4M WIDE
IT ALSO HAS 2 CHAMBERS FOR DRYING THE YARN
THE PRODUCTION THICK YARNS TYPES AND TYPES OF MATERIAL THAT CAN WORK THIS SPINNING.
THE RELATIONSHIPS OF THE MACHINES:
1 BOILER VYC 12 BAR.
1 AUTOCLAVE TAINOX
1 ELECTRIC INDUSTRIAL SCALES
1 OPENING (RIETER)
1 CARDING RIETER
1 CARDING RIETER
1 DRAWING FRAME (24)
1 ROVING FRAME (24)
5 SPINNING FRAME G/01, ZINSER. (118X2 UNIT)
1 SPINNING FRAME G/01, RIETER (108X2 UNIT)
1 AUTOMATIC SCHLAFHORST AUTOCONER. ( 40 )
1 CENTRAL TEMPERATURE / HUMIDITY OF APPROX 20 M X 4 M.
2 CABINS DRYING.
1 FULL LAVORATORIO
2 COMPRESSORS (25 AND 30 HP)
1 DRYER
1 DEPOSIT OF AIR,
*ALL ACCESSORIES IN THE FACTORY.
STOCK ALSO NO THREAD IN LYCRA, ALSO MATERIALS IN BALES

QUANTITY: 1 COMPLETE PLANT

Learn More

P-3657 USTER ZELLWEGER HVI900 YEAR 1997

USTER ZELLWEGER
TYPE: HVI900
YEAR: 1997
CONSIST OF LENGTH & STRENGTH MODULE, MIC MODULE, COLOR AND TRASH MODULES
IN GOOD WORKING CONDITION

QUANTITY: 1

Learn More

M-3758 SAVIO ORION WINDERS YEAR 2007 – 60 POSITIONS – USTER Q2 CLEARERS - CONE 5-57

SAVIO ORION
2007
60 SPINDLES
IN GOOD CONDITION
USTER Q2 CLEANERS
CONICITY IS 5 DEGREE 57

QUANTITY: 5

Learn More

P-3044 SCHLAFHORST 238 UW-P-146 AUTO CONER YEAR 1995 60 SPINDLES

SCHLAFHORST
TYPE: 238 UW-P-146
AUTO CONER
YEAR: 1995
60 SPINDLES
CLEARER: PERYER OPTIQS
POWER: 380 VOLTS, 50 HERTZ, 65 AMPERES
GOOD CONDITION

QUANTITY: 13 SETS

Learn More

P-3142 STORK RDD DIRECT DRIVE PRINTING MACHINE YEAR 1996 WIDTH 1850mm 12 COLORS 4 CHAMBERS STEAM HEATING

STORK
TYPE: RDD DIRECT DRIVE
ROTARY PRINTING MACHINE
YEAR: 1996
WIDTH: 1850mm
DRYER
4 CHAMBERS
STEAM HEATING (YEAR IS OLDER THAN MACHINE)
MACHINE IN WORKING CONDITION

QUANTITY: 1

Learn More