Search results for: 'mac o'

TT-5057 SAVIO ORION WINDING MACHINE, YEAR 2003, CONE TO CONE, 48 POSITIONS RUNNING, IN VERY GOOD CONDITION QUANTITY: 1 Learn More

T-9838 HIGH SPEED BOBBIN WINDING MACHINE, TRAVERSE 250mm HIGH SPEED BOBBIN WINDING MACHINE SIZE: 1920 X 850 X 1500mm 1 SIDE 1920 X 1200 X 1500mm 2 SIDES CONFIGURATION: 4 SPINDLES/ SET 1 SIDE; 8 SPINDLES/ SET 2 SIDE BOBBIN SPEC: 10″ (280mm TO 300mm) TRANVERSE: 250mm TAKE-UP PACKAGE: CYLINDRICAL (0°); CONE, CAN WINDING 8KG YARN POWER SUPPLY: THREE-PHASE 380V 50/60Hz (ORDERED SEPARATELY) ZINC ALLOY DRUM YARN SENSOR: ELECTRONIC YARN BREAK STOP PACKAGING: WOODEN BOX QUANTITY: 2 SETS (8 SPINDLES) LCL Learn More

TT-7359 SSM TASLAN MACHINE ITEM 001 1. SSM TASLAN MACHINE 2. BRAND: SSM 3. TYPE: TASLAN 4. NUMBER OF POSITIONS: 25 ITEM 002 1. SSM AIR JET MACHINE 2. BRAND: SSM 3. TYPE: DP2 4. NUMBER OF POSITIONS: 40 ITEM 003 1. SSM WINDING MACHINE 2. BRAND: SSM 3. TYPE: PW1 4. NUMBER OF POSITIONS: 60 ITEM 004 1. FADIS AIR JET MACHINE 2. BRAND: FADIS 3. TYPE: AJ900 4. NUMBER OF POSITIONS: 36 Learn More

REFERENCE NUMBER: M-3803

SCHLAFHORST SRZ SE ACO 288 FOR COTTON DENIM YARNS YEAR 1993-1995

 

SCHLAFHORST OPEN END SPINNING MACHINES FOR COTTON DENIM YARNS

SCHLAFHORST SRZ SE 9 ACO 288

7 X YEAR 1993

1 X YEAR 1995

240 ROTORS PER MACHINE

ROTOR TYPE: BELCORO 340BD

NAVAL: KN4 (SCHLAFHORST)

PIECER: TWO (2) PER MACHINE

DOFFER/SHUTTLE: ONE (1) PER MACHINE

COROLAB CLEARING SYSTEM INSTALLED PER MACHINE

NO WAXING DEVICES

(1) STARTER STATION PER MACHINE

COMBING ROLL: B174

SLUBBING DEVICE: ENGINEERED TO MODEL AMSLER MACHINE

VOLTAGE: 480/60HZ

 

(5) SPARE SECTIONS (48 POSITIONS COMPLETE, 48 POSITIONS WITH SPIN BOX, BUT WINDING ENDS MISSING, 24 POSITIONS STRIPPED OF PARTS)

(3) SPARE PIECERS (MOST PARTS MISSING)

(1) SPARE DOFFER

(1) SPARE SHUTTLE

 

QUANTITY: 8

Learn More

TT-8282 BEAM WINDER OF BEAM DYEING MACHINE, WIDTH 3660mm, WITH PAD FOULARD 1. WINDER OF BEAM DYEING MACHINE IS SUITABLE FOR RAW MATERIALS OF FABRIC SPOOLS OR A-SHAPED FRAMES. 2. IT UNDERGOES WIDENING FOR DE-CREASING WRINKLES, LASER ALIGNMENT, WATER TANK IMMERSION, WATER REMOVAL BY ROLLING, TENSION CONTROL, AND THE WINDING IS DONE ON THE AXIAL WINDING DRUM OR THE DEDICATED EQUIPMENT OF THE A-SHAPED FRAME. 3. MAIN PARAMETERS: 4. MATERIAL: STAINLESS STEEL 304 5. WIDTH OF FABRIC: 3660mm QUANTITY: 1 SET Learn More

REFERENCE NUMBER: R-7584

CORGHI DOUBLING WINDER, YEAR 2008 MODEL BE TRAVERSE 6 TO 8 INCHES

 

QUANTITY: 1

Learn More

TT-8336 MURATA QPRO PROCESS CONNER (WINDER), 72 SPINDLES EACH, YEAR 2014 TO 2015 1. 1 MACHINE YEAR 2014 2. 1 MACHINE YEAR 2015 3. 72 SPINDLES EACH QUANTITY: 2 SETS Learn More

TT-4616 KARL MAYER GOM 16 WINDING MACHINE, WIDTH 2200mm, YEAR 2004 KARL MAYER GOM 16 WINDING MACHINE USED YEAR 2004 QUANTITY: 1 Learn More

T-4788 GILBOS MODEL AW-2000 WINDERS WITH 12 SPINDLES, YEAR 1991 TO 1997 YEAR 1991 - MACHINE # 90-23XX0 220V OUTBOARD CREEL 2 PLY YEAR 1997 - MACHINE # 96-24XX3 575V INBOARD CREEL 3 PLY YEAR 1997 - MACHINE # 96-24XX4 575V YEAR 1994 - MACHINE # 93-23XX5 240V QUANTITY: 4 Learn More

REFERENCE NUMBER: M-5151 (1212CLKFHH11) L CROON & LUCKE HANK WINDING AND REELING MACHINE YEAR 1962-1980 (1) X HANK WINDING MACHINE – MAKE: CROON & LUCKE – TYPE X 60 C – YEAR 1980 WITH 2 CARRIAGES, 2x5 WINDING HEADS, HANK CIRCUMFERENCE 1800 - 2337mm (1) X HANK REELING MACHINE – MAKE: CRRON & LUCKE – TYPE W 400 – YEAR 1962 MAXIMUM 30 HANKS + ONE SIMILAR DISMANTLED MACHINE FOR SPARE PARTS QUANTITY AVAILABLE: 2 Learn More