Search results for: 'cont'[0]'

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

H-1134 FIBERFILL LOW MELT THERMOBONDING LINE, WORKING WIDTH 2800mm

DETAILS:
CAN DO LIGHT WEIGHT AND CONDENSED WEIGHTS FOR MATTRESSES
WORKING WIDTH: APPROX. 110”/2800mm

THE LINE CONSISTS OF THE FOLLOWING:
OFFER 001
AZTEC 2 BURNER GAS COMPRESSION OVEN
MEASURING 130” W X 25' L
WITH TOP AND BOTTOM COMPRESSION BELTS
QUANTITY: 1

OFFER 002
COOLING CHAMBER

OFFER 003
HUNTER 60” SINGLE SECTION GARNETS

OFFER 004
CAMELBACK LAPPERS

OFFER 005
CROSS LAPPER

OFFER 006
FLOOR APRON

OFFER 007
BLEND LINE
WITH (6) 60” HOPPERS
WITH ALUMINUM WEIGH PANS, BLENDER AND CONVEYOR

OFFER 008
60” CLAW TOOTH PICKER

OFFER 009
130” HIGH SPEED SLITTER
WITH 11 CIRCULAR KNIVES

OFFER 010
130” WIND UP
ALL CONTROLS, MOTORS, DRIVES, PLATFORMS, ETC.

QUANTITY: 1 LINE

C-4020 BENNINGER SIZING AND WARPING MACHINES, WORKING WIDTH 2200mm TO 4000mm, YEAR 1996 TO 1997

OFFER 001
BENNINGER SIZING MACHINE
YEAR: 1996 TO 1997
HEAD BEAMS WIDTH: 4000mm
BEAM DIAMETER: 1000mm

QUANTITY: 2

OFFER 002
BENINGER DIRECT WARPERS
YEAR: 1996 TO 1997
WORKING WIDTH: 2200mm
DIAMETER: 1000mm

QUANTITY: 2

OFFER 003
BENINGER SECTIONAL WARPER
WORKING WIDTH: 4000mm
DIAMETER: 1000mm

QUANTITY: 1

M-6063 AIRLAY / THERMOBONDING PRODUCTION LINE, WIDTH 2500mm TO 2700mm, YEAR 1975 TO 2012

OFFER 001
AIRLAY / THERMOBONDING PRODUCTION LINE
WORKING WIDTH: 2500mm

OFFER 002
CROSA PERINO BLENDING BOXES
YEAR: 1990 (OVERHAULED 2011)
CAPACITY: 750 KG EACH

OFFER 003
HDB CARDING WILLOW
YEAR: 1975

OFFER 004
MESUTRONIC METAL DETECTOR
YEAR: 2007

OFFER 005
MESUTRONIC METAL SEPARATOR
YEAR: 2007

OFFER 006
FALLGARTER HOPPER FEEDER
YEAR: 1975

OFFER 007
ROLANDO HOPPER FEEDER
YEAR: 1985 (OVERHAULED 2003)

OFFER 008
HERGETH HOLLINGSWORTH FINE OPENER
YEAR: 1981

OFFER 009
STUMMER CONTINUOUS CLEANER
YEAR: 2007

OFFER 010
HERGETH HOLLINGSWORTH AIRLAY FEEDING
YEAR: 1981 (OVERHAULED 2012)
WORKING WIDTH: 2500mm

OFFER 011
OLBRICH AIRLAY CARD
YEAR: 2010
WORKING WIDTH: 2500mm

OFFER 012
STRAHM OVEN
YEAR: 2008
WORKING WIDTH: 2700mm

OFFER 013
OLBRICH LONGITUDINAL CUTTING
YEAR: 2004
WORKING WIDTH: 2600mm

OFFER 014
KZE CROSSCUTTING
YEAR: 2012
WORKING WIDTH: 2600mm

QUANTITY: 1 LINE

M-6059 BEMATIC/MECCANICA THERMOBONDING PRODUCTION LINE, WIDTH 2700mm, YEAR 2012

OFFER 001
THERMOBONDING PRODUCTION LINE
YEAR: 2012
WORKING WIDTH: 2700mm

OFFER 002
BEMATIC BALE OPENER

OFFER 003
BEMATIC BALE OPENER FOR BICO FIBER

OFFER 004
BEMATIC WEIGHT CONTROL TOWER

OFFER 005
BEMATIC FINE OPENER

OFFER 006
BEMATIC FINE OPENER

OFFER 007
CF DOUBLE FILTER

OFFER 008
BEMABLOW OPENER

OFFER 009
T-MAX FORMER

OFFER 010
BEMAMULTISCALE

OFFER 011
CF DOUBLE FILTER

OFFER 012
SPRAY CABIN

OFFER 013
BOMBI MECCANICA OVEN

OFFER 014
CALANDER

OFFER 015
COOLING SECTION

OFFER 016
CUTTING SYSTEM

QUANTITY: 1 LINE

V-1250 DILO NEEDLE LOOM FOR PATTERING (NEW CONTROL SYSTEM), WORK WIDTH 4500 mm, YEAR 1982 TO 1989

OFFER 001
DILO NEEDLE LOOM OD SD 45
BRAND: DILO
MODEL: OD SD 45
YEAR: 1982
WORK WIDTH: 4500 mm

QUANTITY: 1

OFFER 002
DILO UNWINDER AWS 45
BRAND: DILO
MODEL: AWS 45
WORK WIDTH: 4500 mm

QUANTITY: 1

OFFER 003
DILO WINDER SW 45
BRAND: DILO
MODEL: SW 45
YEAR: 1989
WORK WIDTH: 4500 mm

QUANTITY: 1

A-1641 DILO SD 45 STRUCTURAL NEEDLE LOOM, WIDTH 4500mm, YEAR 1973

TYPE: SD 45
WIDTH: 4500 mm
YEAR: 1973
EL: 380 / 3 / 50

QUANTITY: 1

A-1640 DILO DILOOP DS 45 STRUCTURAL NEEDLE LOOM, WIDTH 4500mm, YEAR 1989

TYPE: DI-LOOP DS 45
WIDTH: 4500 mm
YEAR: 1989
EL: 380 / 3 / 50

QUANTITY: 1

C-3932 TEMAFA CARDING WILLOW 0201, WIDTH 1200mm, YEAR 1987

TEMAFA CARDING WILLOW
BRAND: TEMAFA
TYPE: 0201
YEAR: 1987
WIDTH: 1200mm 

QUANTITY: 1