Search results for: 'conditio'

TT-4122 DILO NEEDLE LOOM, 4500mm, 40mm STROKE, SINGLE BOARD, 6000 N/M, 1500 RPM, FOR STRAIGHT RIBS ONLY, NO PATTERNS, MODEL DI-LOOP VS 45 BRAND: DILO NEEDLE LOOMS CONDITION: USED CATEGORY: NEEDLE LOOMS QUANTITY: 1 Learn More

TT-3820 DILO DI-LOOP VS 45 NEEDLE LOOM, WIDTH 4500mm, YEAR 1990 DILO DI-LOOP VS 45 BRAND: DILO NEEDLE LOOMS MODEL: DI-LOOP VS 45 CONDITION: USED QUANTITY: 1 Learn More

TT-3819 DILO OD-I 60 NEEDLE LOOMS, WIDTH 6000mm, YEAR 1987 BRAND: DILO NEEDLE LOOMS MODEL: OD-I 60 CONDITION: USED QUANTITY: 1 Learn More

TT-3818 DILO DI-LOOM OD-II HSC 12.5 NEEDLE LOOM, WIDTH 1250mm, YEAR 2004 BRAND: DILO NEEDLE LOOMS MODEL: DI-LOOM OD-II HSC 12.5 CONDITION: USED YEAR: 2004 ELECTRICITY: 480/3/60 QUANTITY: 1 Learn More

TT-3807 DILO DILOOP STRUCTURING NEEDLE LOOM, CAPABLE FOR MAKING RIBS, VELOUR AND PATTERNS, WORKING WIDTH 4500mm, YEAR 1991 QUANTITY: 1 Learn More

TT-1316 NONWOVEN MIDDLE SPEED NEEDLE LOOM, WORKING WIDTH 3200mm MACHINE STRUCTURE FEATURES: 1. SPLICING TYPE STRUCTURE, IT IS MADE BY HIGH QUALITY Q235 STEEL PLATE WELDING, THEN FINE TEMPERING QUALITATIVELY WITH SUFFICIENT COMPLETENESS AND STABILITY. UPPER AND DOWN MACHINE GIRDERS BOTH PRECISELY PROCESSING MACHINED. 2. ECCENTRIC BEARINGS ADOPT TORRINGTON FAMOUS BRAND 3. MAIN SHAFT IS USING 42CROMO MATERIAL. AFTER CONDITIONING TREATMENT FINE FINISHING AND GRINDING. 4. NEEDLE GIRDER HIGH SPEED TURBINE ELECTRIC LIFTING, STRIPPER PLATE TURBINE ELECTRIC LIFTING, NEEDLE GIRDER ROLLER SCALE DISPLAY. AIR LOCKED THE NEEDLE PLATE TIGHTLY. 5. NEEDLE PLATE LUOYANG MADE BY MAGNESIUM ALLOY DIE CASTING PLATE COMPOSITE PU, RADON ARRANGE NEEDLES HOLE φ1.82mm 6. INPUT PVC LATTICE, OUTPUT ROLLER ADOPTS φ155mm, HIGH QUALITY SEAMLESS STEEL PIPE, AFTER FINISHING GRINDING, THE SURFACE IS PLATED WITH HARD CHROME, UPPER ROLLER ADJUSTABLE HEIGHT AIR CYLINDER. 7. MAIN MOTOR, OUTPUT ROLLER ALL FREQUENCY CONTROL. 8. INSTALLED POWER: AROUND 15.5KW, MAIN MOTOR 11 KW. QUANTITY: 1 SET Learn More

J-3803 DILO DI-LOOP SV-45 STRUCTURING NEEDLE LOOM, WORKING WIDTH 4500mm MAKE: DILO MODEL: DI-LOOP SV-45 WORKING WIDTH: 4500mm 3.5mm LAMELLA PITCH HYDRAULIC PATTERNING DEVICE YEAR: 1991 (UPDATED IN 2020 WITH HYDRAULIC SYSTEM FOR PATTERNING, NEW NEEDLE BOARDS AND LAMELLA BED PLATES.) QUANTITY: 1 Learn More

J-3801 DILO OD-SV 25 UPSTROKE NEEDLE LOOM, WORKING WIDTH 2500mm MACHINE IS IN GOOD WORKING CONDITION NO MAINTENANCE RECORDS AVAILABLE MACHINE WAS STOPPED 2 YEARS AGO BUT WORKED VERY WELL UNTIL STOPPED OPTIONAL TECHNICAL REVIEW AND ADDITIONAL SPARE BOARD AVAILABLE AT ADDITIONAL COST QUANTITY: 1 Learn More

REFERENCE NUMBER: M-3290

FEHRER NL42 NEEDLE LOOM YEAR 1985 WIDTH 2700mm – QUATTRO PUNCH

 

MAKE: FEHRER

TYPE: NL42

YEAR: 1985

WORKING WIDTH 2700mm

QUATTRO PUNCH

TWO BOARDS UP AND TWO BOARDS DOWN

NEEDLES: 4 X 7500 N/M

WEIGHT: CA. 22TO

DIMENSIONS: 3900mm X 2300mm X 2600mm

 

COMPLETE WITH CONTROL SYSTEM

COMPLETE WITH FEEDING SYSTEM

DC MAIN DRIVE

GOOD CONDITION

OVERHAULED 2 GEARBOXES

 

MACHINE IS STILL IN OPERATION

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More