Search results for: 'Cutters'

M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
IN FRONT OF:
1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
6 FILTER UNITS.

- ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
- CAPACITY UP TO 1000KG/HR.

Learn More

C-3796 MARGASA 4-DRUM TEARING LINE, WORKING WIDTH 900mm TO 1500mm, YEAR 2012

MARGASA 4-DRUM TEARING LINE
YEAR: 2012
WORKING WIDTH: 1500mm

CONSISTING OF:

MARGASA CMT-900 ROTARY CUTTERS
WORKING WIDTH: 900mm
QUANTITY: 2

METAL DETECTOR
QUANTITY: 1

PNEUMATIC TRANSPORT
QUANTITY: 1

MAGNETIC DUCT
QUANTITY: 1

BIG STORAGE BOX
QUANTITY: 1

FEEDING
QUANTITY: 1

MARGASA MASTER MCM-1500-DD 4-DRUM TEARING MACHINE
WORKING WIDTH: 1500mm
DRUM DIAMETER: 1000mm
WITH:
PRESSING ROLLER
WITH A LARGE DIAMETER TO COMPACT THE MATERIAL
BEFORE THE FIRST FEED ROLLER OF THE TEARING MACHINE
BEATERS THAT ELIMINATE THE FOREIGN SUBSTANCES
SUCH AS PLASTICS
WOODS
AND BUTTONS
THAT DUE TO WEIGHT HAVE FALLEN ON THE RETURN APRON
RETURN LATTICE
WITH MOTOR-REDUCER OF 1.5 KW
THAT DRIVES THE BIT RETURN LATTICES
OF THE MATERIAL TO BE RECYCLED
QUANTITY: 1

TAKES 4 CONTAINERS TO LOAD

QUANTITY: 1 LINE

Learn More

P-3516 BALEMASTER AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR YEAR 1989

BALEMASTER
AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR
YEAR: 1989
6’ WIDE x 32’ LONG INCLINED LOADING BELT CONVEYOR:
ORIGINAL INSTALLATION:
THE ENTRANCE WAS BELOW FLOOR LEVEL ALLOWING FLOOR LEVEL, PUSH-TYPE LOADING. PRODUCT THEN FALLS ONTO A SHORT SECTION OF SHREDDER FEEDING CONVEYOR
EQUIPPED WITH:
24 INCHES HIGH SIDE GUIDES
AUTO BELT TRACKING

BALEMASTER
SERIES 1350J-62 PAPER SHREDDER
62 INCHES WIDE
SPECIFICATIONS:
MOUNTED TO TOP OF BALER FEED CHUTE
WAS USED FOR MAGAZINE EDGE TRIM & NEWSPAPER, BUT CAN BE USED FOR OTHER MATERIALS

BALEMASTER
MODEL: 4025C-8
AUTO TIE BALER
YEAR: 1989
SPECIFICATIONS:
MATERIALS: NEWSPRINT, MAGAZINES, CORRUGATED CHIPBOARD, FIBERBOARD, BOXBOARD
BALESIZE: 28 INCHES W x 36-1/2 INCHES H x UP TO 84 INCHES LONG
BALE WEIGHT: 1,440 POUNDS @ 72 INCHES LONG
OPENING SIZE: 17 INCHES x 32 INCHES
BALER HEIGHT: 48 INCHES
BALER HEIGHT WITH CHUTE: 72 INCHES
CYLINDER DIAMETER: 8 INCHES
THRUST: 150,900 POUNDS @ 3,000 PSI
NUMBER OF WIRE REELS: 5 @ 100 POUNDS EACH
(10) AUTO TWISTER HOOKS, (5) CUTTERS PER SIDE

EQUIPPED WITH:
AIR COOLED HYDRAULIC OIL COOLER FOR CONTINUOUS OPERATION WITH ITS OWN MOTOR & PUMP WATER SPRAY SYSTEM
(2) 5’ LONG BALE TAKE-AWAY TABLES

MOTOR DATA: 25 HP BALER, 230/460/60/3

NOTE: INSTALLATION ASSISTANCE AVAILABLE

QUANTITY: 1

Learn More

P-3124 DORNIER LWV2/E AIRJET LOOMS YEAR 2001 WIDTH 3400mm CAM

QUANTITY: 72 SETS

Learn More

REFERENCE NUMBER: M-5335 (220DSHLXX1) L DELL’ORCO & VILLANI RAG TEARING LINES + BALE PRESS (2) X DELL’ORCO & VILLANI CUTTERS YEAR 1989 (2) X DELL’ORCO & VILLANI MIXING ROOMS + BIN EMPTIER TYPE FA / 3030 / T. (1) X DELL’ORCO & VILLANI VOLUMATIC FEEDER, MODEL CARICATORE TYPE CS / 1600, YEAR 1999 (1) X DELL’ORCO & VILLANI RAG TEARING MACHINE, 4 CYLINDERS YEAR 1999, WIDTH 1500mm, EACH DRUM MODEL M/1500, TYPE SFILACCIATRICE (1) X DELL’ORCO & VILLANI VOLUMATIC FEEDER, MODEL CARICATORE TYPE CS / 1600, YEAR 1989 (1) X DELL’ORCO & VILLANI RAG TEARING MACHINE, 3 CYLINDERS YEAR 1989, WIDTH 1500mm, EACH DRUM MODEL M/1500, TYPE SFILACCIATRICE (1) X DELL’ORCO & VILLANI BALE PRESS, TYPE RA / 100, WITH 2 CHAMBERS (ROTATIVE SYSTEM) WITH WEIGHING DEVICE (SCALE FOR KG OF EACH BALE) (1) X DELL’ORCO & VILLANI DUST COLLECTING INSTALLATION, WITH BAGS TO COLLECT THE DUST QUANTITY AVAILABLE: 10 Learn More

REFERENCE NUMBER: M-5304

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

 

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

ADDITIONAL FAN FEEDING MACHINE MODEL 503

WITH 2 SERIES CUTTERS

WORKING WIDTH: 500mm

DIMENSIONS (LxWxH): 2100mm x 1140mm x 1420mm

CUTTING SIZE (WIDTH): 8mm

CUTTING SIZE (LENGTH – ADJUSTABLE): 6mm TO 60mm

POSSIBLE THICKNESS: ≤ 60mm

CAPACITY: 250 TO 300 KG PER HOUR

POWER: 10.2 KW

WEIGHT: 1,000 KG

 

QUANTITY: 1 SET

Learn More

REFERENCE NUMBER: M-5305

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

 

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

ADDITIONAL FAN FEEDING MACHINE MODEL 503

WITH 3 SERIES CUTTERS

WORKING WIDTH: 500mm

DIMENSIONS (LxWxH): 2850mm x 1240mm x 1270mm

CUTTING SIZE (WIDTH): 8mm

POSSIBLE THICKNESS: ≤ 60mm

CAPACITY:           250 TO 300 KG PER HOUR (CUTTING FOAM WASTE)

125 TO 160 KG PER HOUR (CUTTING QUILTED FABRIC WASTE)

POWER: 14.2 KW

WEIGHT: 1,300 KG

 

QUANTITY: 1 SET

Learn More

REFERENCE NUMBER: A-1275 (010123JGHB12RC) A BABCOCK ARTOS STENTER FRAME FOR KNITTED FABRICS YEAR: 2003 TYPE: ECON-AIR ROLLER WIDTH: 2600MM FABRIC WIDTH: 2400MM 6 CHAMBERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-9326 BABCOCK WIDE TENTER FRAME 144" (3657mm) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1976 (770395POK6RM) BABCOCK FRAME 144" WIDE-3600mm QUANTITY AVAILABLE: 1 Learn More