Search results for: 'Production'

REFERENCE NUMBER: T-6946 SOLAR PANEL PRODUCTION PLANT, 80 MW, YEAR 2008 SOLAR PANEL PRODUCTION PLANT 80 MW OUTPUT CAPACITY PER YEAR THIN FILM SOLAR PANELS AMAT PECVD SYSTEM MODEL "NEW ARISTO" (VERTICAL SPUTTER WITH 14 CHAMBERS) INCLUDING ROBOT HANDLING, CONVEYORS, ATON 1600, ETC. STILL INSTALLED, USED QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6942 CEREAL PRODUCTION PLANT CEREAL PRODUCTION PLANT CORNFLAKES, EXTRUDED PRODUCTS, CRUNCHY MUESLI CAPACITY APPROX. 45 TONS / 24 HOURS STILL INSTALLED, USED QUANTITY: 1 Learn More

A-2524 MELTBLOWN FABRIC PRODUCTION MACHINE 1600 mm MACHINE TYPE: MELTBLOWN WORKING WIDTH: 1600mm PRODUCTION SPEED: 24 TO 30 M/min EXTRUDER DIAMETER IN mm: 90mm EXTRUDER MOTOR IN KW: 45 KW PRODUCT WEIGHT RANGE: 8000 TO 1000 KGS MELTBLOWN FABRIC THICKNESS: 25 TO 30 GSM MAX OUTPUT: 1500 TO 1800 KG / 24 HOURS DIMENSION: 20000 X 8000 X 9000 mm WEIGHT: 8000 TO 1000 KGS POWER (TOTAL KW): 575 KW VOLTAGE: 220 VOLTS AND 50/60 Hz QUANTITY OF CONTAINERS NEEDED: 1 X 40 + 1 X 20 PRODUCTION TIME: 45 DAYS Learn More

REFERENCE NUMBER: A-2490 INNER EARLOOP SURGICAL MASK PRODUCTION LINE 1+1 FULLY AUTOMATIC MASK MACHINE MACHINE WILL COMPLETE THE WHOLE PRODUCTION PROCESS FROM RAW MATERIAL ROLL TO FINISHED PRODUCT OF THE MASK. THE EQUIPMENT INCORPORATES ULTRASONIC WELDING MODE, SANITATION AND ENVIRONMENTAL PROTECTION. SPECIFICATIONS: MACHINE SIZE: 5000 X 2500 X 1900 mm NET WEIGHT: <= 2000 KGS GROUND BEARING ≤200 KG/M2 WORKING POWER: 220 VOLTS AND 50/60 Hz COMPRESSED AIR: 0.5 TO 0.7 MPA USAGE FLOW: 150 L/min USE ENVIRONMENT: TEMPERATURE 1O TO 35℃ HUMIDITY: 5 TO 55% HR, NO COMBUSTIBLE OR CORROSIVE GAS OR DUST NORMAL PRODUCTION: 60 TO 90 PCS/min FEATURES • INCORPORATING ULTRASONIC WELDING TECHNOLOGY, SANITARY AND ENVIRONMENTAL - FRIENDLY • WHOLE PRODUCTION LINE IS AUTOMATIC FROM FEEDING, NOSE STRAP INSERTING, EDGE SEALING AND CUTTING FINISHED PRODUCTS • THE FRAME STRUCTURE IS MADE OF ALUMINUM ALLOY AND THE KEY PARTS ARE MADE OF STAINLESS STEEL. • COMPUTER PLC PROGRAMMING CONTROL, STEP OR SERVO DRIVE, PARTIAL PNEUMATIC DRIVE, HIGH STABILITY, LOW FAILURE RATE, HIGH EFFICIENCY • FEEDING, WELDING AND BINDING OF EARBELT ARE DRIVEN BY STEP OR SERVO MOTOR • THE TENSION OF THE RAW MATERIALS HAS AUTOMATIC CONTROL TO ENSURE THE TENSION BALANCE OF RAW MATERIALS • PHOTOELECTRIC (OPTICAL FIBER) DETECTION OF RAW MATERIALS TO AVOID MISTAKES AND REDUCE MATERIAL WASTE Learn More

REFERENCE NUMBER: A-2489 OUTER EARLOOP MASK PRODUCTION LINE MACHINE WILL COMPLETE THE WHOLE PRODUCTION PROCESS FROM RAW MATERIAL ROLL TO FINISHED PRODUCT OF MASK. THE EQUIPMENT INCORPORATES ULTRASONIC WELDING MODE, WITH BEAUTIFUL STYLE, SANITATION AND ENVIRONMENTAL PROTECTION. SPECIFICATIONS: MACHINE SIZE: 5000 X 2500 X 1900 mm ULTRASONIC: 3 PCS, 20 K 2000W NET WEIGHT: <= 2000 KGS GROUND BEARING ≤200 KG/M2 WORKING POWER: 220 VOLTS AND 50/60 Hz COMPRESSED AIR: 0.4 TO 0.7 MPA USAGE FLOW: 300 L/min USE ENVIRONMENT: TEMPERATURE 1O TO 35℃ HUMIDITY: 5 TO 55% HR, NO COMBUSTIBLE OR CORROSIVE GAS OR DUST NORMAL PRODUCTION: 60 TO 70 PCS/min ACCURACY: ≥99% EXCLUDING RAW MATERIAL DEFECTS AND MISOPERATION FEATURES • INCORPORATING ULTRASONIC WELDING TECHNOLOGY, SANITARY AND ENVIRONMENTAL - FRIENDLY • WHOLE PRODUCTION LINE IS AUTOMATIC FROM FEEDING, NOSE STRAP INSERTING, EDGE SEALING AND CUTTING FINISHED PRODUCTS • THE FRAME STRUCTURE IS MADE OF ALUMINUM ALLOY AND THE KEY PARTS ARE MADE OF STAINLESS STEEL. • COMPUTER PLC PROGRAMMING CONTROL, STEP OR SERVO DRIVE, PARTIAL PNEUMATIC DRIVE, HIGH STABILITY, LOW FAILURE RATE, HIGH EFFICIENCY • FEEDING, WELDING AND BINDING OF EAR BELT ARE DRIVEN BY STEP OR SERVO MOTOR • THE TENSION OF THE RAW MATERIALS HAS AUTOMATIC CONTROL TO ENSURE THE TENSION BALANCE OF RAW MATERIALS • PHOTOELECTRIC (OPTICAL FIBER) DETECTION OF RAW MATERIALS TO AVOID MISTAKES AND REDUCE MATERIAL WASTE Learn More

CAPACITY: 100 TO 150 MASKS PER MINUTE
PRODUCES MASKS WITH 3 LAYERS OF POLYPROPYLENE NONWOVEN MATERIAL
AIR PRESSURE: 0.6 MPa, AIR CONSUMPTION 300 LITERS PER MINUTE
CONTROLLED BY PLC, OPERATED BY LCD TOUCH SCREEN
USES ULTRASONIC WELDING FOR EAR STRAPS
VOLTAGE: AS PER CUSTOMER
TOTAL POWER: 11 KW
DIMENSIONS: 6850 x 3520 x 1990mm
WEIGHT: ≤ 5000kg

MASK SURFACE LAYER, FILTER LAYER AND BOTTOM LAYER CAN BE ALIGNED AND FED TO THE MACHINE AUTOMATICALLY
BOTH SIDES ARE SYMMETRICAL WITH ULTRASONIC PROCESS STATIONS FOR EAR STRAP WELDING
AFTER WELDING, THE MASKS ARE COUNTED AND PILED TOGETHER AUTOMATICALLY
MASKS ARE DISTRIBUTED EVENLY TO TWO SETS OF EAR STRAP STATIONS BY AUTOMATIC TRANSMISSION SYSTEM, CONTROLLED BY PLC
NOSE CLIPS CAN BE AUTOMATICALLY FED, CUT AND ULTRASONICALLY WELDED

THE CUP TYPE MASK PRODUCTION LINE CAN BE SENT BY AIR, THERE ARE TOTAL 5 WOODEN CASES, SIZES AND WEIGHT AS BELOW:

1. 2500 X 1100 X 1000mm, 1PC, 250KGS
2. 2200 X 1000 X 1500mm, 1PC, 1100KGS
3. 3000 X 1200 X 1500mm, 1PC, 1100KGS
4. 3000 X 1200 X 1500mm, 1PC, 1100KGS
5. 1900 X 700 X 1150mm, 1PC, 250KGS

IF CUSTOMER NEEDS MASK BAGGING MACHINE TO CONNECT WITH DISPOSABLE MASK PRODUCTION LINE, THERE WILL BE ANOTHER TWO WOODEN CASES EXTRA, BUT WILL CANCEL THE FIFTH WOODEN CASE, SIZES AND WEIGHT AS BELOW:

1. 1580mm X 840MM X 1510 mm，1PCS, 340KG
2. 2540 mm X 540 mm X 1510 mm，1PCS, 80KG

Learn More

COMPOSED OF
FACE MASK BLANK MAKING MACHINE
AUTOMATICALLY PRODUCES THE MAIN PART OF THE MASK
MACHINE HANDLES FEEDING, ALUMINUM STRIP INSERTION, CUTTING, FOLDING, ULTRASONIC WELDING, CUTTING
OUTPUT: 120 PIECES PER MINUTE
VOLTAGE: 220 VOLTS
POWER CONSUMPTION: 2.7 KW
DIMENSIONS: 3345 x 630 x 1830mm
CAN PRODUCE 3 TO 4 DIFFERENT MASK BLANKS ACCORDING TO PRODUCTION REQUIREMENTS
FOLDING LOCATION AND SIZE OF MASK IS ADJUSTABLE
COMPUTER CONTROLS AND PHOTOELECTRIC DETECTION ENSURE LOW FAILURE RATE AND HIGH RELIABILITY
FRAME CONSTRUCTED OF ALUMINUM ALLOY
QUANTITY: 1

FACE MASK TRANSFERRING MACHINE
TRANSFERS THE MASKS TO THE ULTRASONIC EAR STRAP WELDING MACHINE
QUANTITY: 1

ULTRASONIC EAR STRAP WELDING MACHINE
WELDS THE ELASTICS ON BOTH EDGES OF THE MASK
AUTOMATIC COUNTING
AUTOMATICALLY CONVEYS THE FINISHED MASKS TO PACKING PROCESS (PACKING BY HAND)
COMPUTER CONTROLS AND PHOTOELECTRIC DETECTION ENSURE LOW FAILURE RATE AND HIGH RELIABILITY
FRAME CONSTRUCTED OF ALUMINUM ALLOY
QUANTITY: 2

PRODUCES MASKS WITH DIMENSIONS: 175mm x 95mm (ADULT SIZE)
FOR MASK TYPES: 2 LAYERS OF NONWOVEN CLOTH, 3 LAYERS OF NON-WOVEN FABRIC MASKS, 4 LAYERS OF ACTIVATED CARBON MASKS
• 2 LAYER FACIAL MASK: NONWOVEN, ALUMINUM STRIP, EAR STRAP WELDING
• 3 LAYER FACIAL MASK: NON-WOVEN, ALUMINUM STRIP, EARLOOP WELDING, FILTER COTTON (FILTER PAPER)
• ACTIVATED CARBON MASKS: NONWOVEN, ALUMINUM STRIP, EARLOOP WELDING, FILTER COTTON (FILTER PAPER), ACTIVATED CARBON CLOTH

TECHNICAL PARAMETERS
OVERALL DIMENSIONS: 6500 L x 4000 W x 2000 H (mm)
PRODUCTION EFFICIENCY: 95%
PRODUCT SIZE: 175 x 95mm (ADULT SIZE)
FACIAL MASK LAYERS: 3 TO 4 LAYERS
POWER: 9 KW
AIR PRESSURE REQUIRED: 0.6 MPA
AIR CONSUMPTION: 300 LITERS PER MINUTE
WEIGHT: APPROXIMATELY 1800 KG
GROUND WEIGHT BEARING: ≤ 500KG/m2
ALL OF THE MAIN DRIVING PARTS ARE PROTECTED BY PROTECTIVE COVER

QUANTITY: 1 COMPLETE LINE

Learn More

P-6605 PROBAT PRODUCTION ROASTER

HERE IS A CLASSIC PRODUCTION PROBAT ROASTER - BUILT TO RUN 24/7 . . . AND IT HAS BEEN SITTING FOR THE PAST 4 YEARS AS THEY GOT IN TROUBLE FOR NOT HAVING AN AFTERBURNER. NOW THEY ARE REPLACING THE MACHINE WITH A NEW MORE MODERN (AND A LOT MORE EXPENSIVE) SYSTEM. THIS MACHINE IS SCHEDULED TO BE PULLED AND WILL GO INTO STORAGE DURING JULY. EURO LOCATION AND EASY TO LOAD INTO CONTAINER AND ARRIVE AT YOUR NEW LOCATION. MOST ALL THE UTILITIES CAN BE CHANGED TO ACCOMODATE YOUR INDUSTRIAL GAS/PROPANE AND 3 PHASE ELECTRICAL.

GREAT INSTALLATION CONSISTING OF DUAL CYCLONES - ONE FOR ROASTING CHAFF COLLECTION AND THE OTHER FOR THE COOLER - ALL THE ROASTING AND COOLING FOR FINGER TOUCH PNUEMATIC CONTROL (ALL ORIGINAL) AS WELL AS COFFEE DE-STONINGL; EVEN THE CYCLONES ARE EQUIPPED WITH ROTARY VALVES AND SUCTION SYSTEM. VERY SOLID PROBAT INSTALLATION AND THAT MEANS IT IS SUPER TOUGH WITH TOP LINE PARTS.

THIS IS PERFECT MACHINE FOR COFFEE, COCOA AND EVEN MALT ROASTING.

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4326

BABY WET WIPES PRODUCTION LINE

 

Model L80

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 10" LCD touch screen
Cutting: synchronous flail knife
Packing style: automatic distribute,2 sets packing machine can respective online
Unwinding structure: 80 electronic eyes detect online (auto splicing machine: 32 sets)
Frequency division detection: 80 electronic eyes detect online
Frequency division pulling: 4 sets dry wipes pulling , 2 sets wet wipes pulling
Auto splicing: film automatic splicing, label automatic switching
Frequency division detection: nonwoven ,film, label detect respectively
Metal detect: online metal detector
Inferior eliminate: aluminizing paste connector rejected online
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 80 fluid pipes spray independently
SUS Agitate tank: 2 sets, 1000L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W220mm, φ1400mm, max W1050mm, φ1000mm
Axis QTY settings:80 rolls raw materials (auto splicing type 32 rolls)
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-250mm  W90-110mm
Open size: L120-250mm W150-220mm
Package size: L150-350mm W80-120mm H20-100mm
Design speed: 120bags/min &250cutting/min
Production speed: 100 bags/min &200 cutting/min
Machine space: L54000mm W3500mm H2100mm, L57000mm W4600mm H2100mm(auto splicing machine)
Power: AC 380V 50/60Hz 35KW(auto splicing machine:40KW)
Compressed air: 0.6-0.8Mpa 500L/min
Machine net weight :30000kg(auto splicing machine 35000Kg)

Option equipment: Coding machine Big roll material automatic splicing

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4325

WET WIPES PRODUCTION LINE

 

Model L40

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 10" LCD touch screen
Cutting: synchronous flail knife
Packing style: end seal & reciprocating type(connecting 2 packing machine need explain)
Unwinding structure: 40 sets, 40 electronic eyes detect online(16 sets big rolls material) 
Auto splicing: film automatic splicing, label automatic switching                      
Frequency division detection: nonwoven, film, label detect  respectively
Frequency division pulling: 2 sets dry wipes pulling , 2 sets wet wipes pulling
Auto splicing: film automatic splicing, label automatic switching
Frequency division detection: nonwoven ,film, label detect respectively
Metal detect: online metal detector
Inferior eliminate: aluminizing paste connector rejected online
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 40 fluid pipes spray independently
SUS Agitate tank: 2 sets, 1000L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W220mm, φ1400mm, max W1050mm, φ1000mm
Axis QTY settings:40 rolls raw materials (auto splicing type 32 rolls)
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-110mm
Open size: L120-220mm W150-220mm
Package size: L150-350mm W80-120mm H10-80mm
Design speed: 60bags/min &250cutting/min
Production speed: 50 bags/min &200 cutting/min
Machine space: L31000mm W2500mm H2100mm. L32600mm W3600mm H2100mm(auto splicing machine)
Power: AC 380V 50/60Hz 22KW(auto splicing machine:25KW)
Compressed air: 0.6-0.8Mpa 400L/min
Machine net weight :22000kg(auto splicing machine 25000Kg)

Option equipment: Coding machine Big roll material automatic splicing

 

QUANTITY: 1

Learn More