Search results for: 'Steel tabl'

J-4126 DOWN AND COTTON FILLING MACHINE, 2 NOZZLES, CAPACITY 1000 KG PER DAY PACKED DIMENSIONS: • 1000mm x 2130mm x 2400mm • 1000mm x 2250mm x 1330mm • 1225mm x 1500mm x 1200mm 40 FOOT HC CONTAINER CAN LOAD 4 SETS. 40 FOOT GP CONTAINER CAN LOAD 3 SETS QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2239
ATLANTA ATTACHMENT TAPE EDGE MACHINE WITH SINGER HEAD, HIGH-LIFT

MAKE: ATLANTA ATTACHMENT
WITH SINGER HEAD, MODEL 1345
HIGH LIFT
STAINLESS STEEL TABLE TOP (60 x 80 INCH, QUEEN SIZE)
SINGLE PHASE CURRENT
SLOW CORNER DEVICE
MOTORIZED SEW HEAD TILT
MAXIMUM MATTRESS HEIGHT: 20.5 INCHES

REBUILT & GUARANTEED

(from J-2162)

QUANTITY: 1

Learn More

REFERENCE NUMBER: R-8152
FLORIGO AC300 POTATO CRISP LINE YEAR 1994
FLORIGO POTATO CRISP LINE, MANUFACTURED BY FLORIGO
FLORIGO MODEL AC300, YEAR 1994
QUANTITY: 1

Learn More

REFERENCE NUMBER: R-7637
CAPACITY: 20 TO 70 TPD
SPEED : MAXIMUM 400 M/MIN
QUANTITY: 1

Learn More

REFERENCE NUMBER: M-3674 (880WUREXX7) L SANTEX TENTER YEAR 1997-PIN CHAIN -6 ZONES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1251 FLUID BED DRYER SYSTEM, 60 DIAMETER, GAS-FIRED, 5 TPH, WITH MAXON SHUT OFF VALVES QUANTITY AVAILABLE: 1 Learn More

G-1535 FOAM DRILLING MACHINE (FOAM PERFORATING MACHINE) MODEL: NOVA 26 TECHNICAL DATA: LOADING CONVEYOR: 2100 X 2100mm (82" X 82") UNLOADING CONVEYOR: 2100 X 2100mm (82" X 82") MAXIMUM DRILLING WIDTH: 2100mm (82") MAXIMUM DRILLING HEIGHT: 180mm (7") HOLE DIAMETER: 6 TO 30mm (1/4" TO 1.18") MAXIMUM CONTEMPORANEOUS HOLES NUMBER: 26 MINIMUM DISTANCE BETWEEN THE CHUCKS: 80mm POWER: 11 KW VOLTAGE: AS PER CUSTOMER WORKING PRESSURE BAR: 6 (90 PSI) NET WEIGHT: 2293 KGS (5000 LBS) FLOOR SPACE: 4375 X 3780 H 2204mm Learn More

CLOSED TYPE WITH SMALL AIR-CONDITIONER (2) COMPUTER AND FILLING SETS RUN BY TWO OPERATORS DIAMETER OF FILLING NOZZLE: 12mm FILLING WEIGHT ≤2 GRAM, FILLING TIME ≤1 SECOND AN AIR COMPRESSOR (THREE-PHASE WITH 5.5KW) AND AN AIR STORAGE TANK (0.6 TO 1 M³) ARE NEEDED THE CAPACITY OF THE COMPRESSED AIR CAN BE USED BY (12) SETS OF FILLING NOZZLES (SIX FILLING MACHINES) DIAMETER OF COMPRESSED AIR PIPE: 1” (FROM AIR STORAGE TANK TO FILLING ROOM) DIAMETER OF COMPRESSED AIR PIPE: ½” (MAIN MACHINE TO FILLING NOZZLE) VOLTAGE: 220V POWER: AIR-CONDITION 500W, AIR-CIRCULATION FAN 370W, FILLING FAN 180W, VARIABLE SPEED MOTOR 200W, LIGHTS 60W AND COMPUTER 50W AIR PRESSURE: 6MPa FLOOR SPACE OF FILLING ROOM: ≥6M² FILLING ERROR RANGE: 1 GRAM FOR ONE PIECE DOWN CONTENT: 50% TO 95% STAINLESS STEEL MAIN FRAME TOUCH SCREEN WITH (1) PRECISE WEIGHING SCALE WITH AIR CIRCULATION SYSTEM AUTOMATICLLY RECYCLE FEATHERS THAT FALL TO THE FLOOR MOVABLE FILLING MACHINE CAN BE DISMOUNTED WITH SPOTLIGHT (2) WORKING TABLE DIMENSIONS OF THE MACHINE: 3000 X 1300 X 1800 (mm) Learn More

REFERENCE NUMBER: J-1123 (1212KJNMXX11) NONWOVEN LINE EXIT WIDTH 2500mm MIXING/BLEND UNIT CONSIDER 1 3- COMPONENTS MIXING UNIT 1500 KG/H WITH FEET TABLE 1 MIXING CHAMBER/ MIXMASTER FÖRDERVENTLATOREN 1 CARDING WILLOW WORKING WIDTH 1700 MM CHUTE FEEDER VIBRITING UNIT BELT WEIGHTER 1 PCS. DOUBLE DOFFER CARD FOR TYP DF 680 WORKING WIDTH 2500 MM 6 ROLLER DRAWING-IN VOLANT EXIST (BUT NOT IN US, BECAUSE NOT FOR MAN-MADE FIBERS) RIM VENTILATION UPPER DOFFER WITH RANDOM DOWN DOFFER WITH TAKE-OFF ROLL ALL ELECTRIC DRIVES ARE FULL SYNCHRONIZES WITH THE MAIN DRIVERS OF THE NEEDLE PUNCH UNIT 1 PCS. TECHNOPLANTS CROSS-LAPPER TYP 2555. OC INPUT: 2`500 MM OUTPUT: 5700 MM SPEED: 80 M/MIN PROFILING UNIT 1 PCS. TECHNOPLANTS PRE-NEEDLEPUNCHE UNIT TYP PRN.50.DU.55 F WORKING WIDTH 5500 MM WITH FINGER- DRAWING-IN SYSTEM, TYP FG.5500 (CBF) 5000 NEEDLE/ METER UP 5000 NEEDLE / METER DOWN TOTAL 10'000 NEEDLE/ METER UP AND DOWN MAXI. STORKE FREQUENZ: 1200 U/MIN. STORKE HIGHT: 70 MM ENTRY SPEED. 1,2 UP TO 12 M/MIN. 1 PCS. FINISHING-NEEDLEPUNCH DILO OUG II 55 WORKING WIDTH: 5500 MM NEEDLE UP AND DOWN: 8000 + 8000 PRO LFM. TOTAL 16'000 NEEDLE 4 BOARDS MAXI STORKE FREQENZE.: 1200 U/MIN STORKE HIGHT: 60 MM ENTRY SPEED : 1,2 UP TO 12 M/MIN 1 PCS SPACER 1 PCS. LONGITUDINAL- UND CROSS CUTTING, MOD. LTC. CC-RB STAINLESS STEEL , DIAMETER 300 MM, UP TO 6 –KNIVES 1 PCS. WINDING, MODELL WM.55.M INCLUDING WEIGHING MACHINE QUANTITY AVAILABLE: 1 Learn More

JAMES CASH KING SIZE TAPE EDGE STAINLESS STEEL TABLE (dimensions 78”x80”)(1981 x 2032mm) UNDER CURRENT (ELECTRICITY FED FROM UNDERNEATH) To be fully rebuilt Can put up to 22 inch high mattress Learn More