Search results for: 'air in'

REFERENCE NUMBER: M-0428-SHORT VERSION CATTLE SLAUGHTERING AND PROCESSING EQUIPMENT FOR 200 CATTLES PER DAY 200 CATTLES PER DAY QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-4426 SLAUGHTER LINE FOR CATTLE (300 PD) AND SHEEP (1000 PD) QUANTITY AVAILABLE: 1 Learn More

WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) REED MODULE (HM6), DROP WIRE MODULE (HM3) AND CONTROL MODULE JAYTEX WARP TYING MACHINE YEAR 2005 WARP TYEING MACHINE JAYTEX TROLLEY WITH TRANSFORMER WITH 2 NOS. TYING FRAMES SETIA KIJJI REED CLEANING MACHINE YEAR 2006 SETIA KIJJI – ULTRA SONIC CLEANING MACHINE REED CLEANER CONSISTS OF RINSING UNIT ULTRASONIC UNIT DRYING UNIT, SEMI AUTOMATIC PROCESS USING PLC. (18 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 EACH – 16 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI ELECTRONIC DOBBY 16 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (48 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 – 10 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 10 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (24 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 2E+06 – 6 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 6 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (2 UNITS) GREY INSPECTION MACHINE YEAR 2006 INSPECTION TABLE IS LAMINATED, PUSH BUTTON CONTROLS ARE GIVEN ON THE DRIVE BOX ON THE RIGHT HAND SIDE, CLOTH CAN RUN IN FORWARD AS WELL AS IN REVERSE DIRECTION FABRIC RUNS FACE IN/FACE OUT SPECIAL JOGGING OR INCHING DEVICE FABRIC FOLDING MACHINE YEAR 2006 SWINGING MOTION IS MINIMIZED TO ENSURE HIGH MACHINE CAPACITY AND INCREASE OUTPUT FOLDING BLADES ARE MOUNTED ON A CARRIAGE WHICH HAS A TO AND FRO MOVEMENT ACHIEVED BY SPECIAL STEEL ROLLER CHAIRS BALE PRESS YEAR 2001 BATH BEI HYDRAULIC BALE PRESS MACHINE FABRIC PROCESSING SINGEING MACHINE YAMUNA SINGEING MACHINE WIDER WIDTH – YEAR 2006 (2 UNITS) HYDRAULIC JIGGER KUSTER CALICO YEAR 2006 3E+06 VERTICAL DRYING RANGE YEAR 2006 CONTINUOUS DYEING RANGE – KUSTER CALICO KUSTER CALICO COLD PAD BATCH YEAR 2006 HARISH STENTER – SUPRA 5 DLXI ALMAC FINISH INSPECTION MACHINE YEAR 2006 SHRI NARAYAN COTEX FINISH PLAITING MACHINE YEAR 2006 Learn More

REFERENCE NUMBER: K-5045-A CONCRETE BATCHING CEMENT PLANT QUANTITY AVAILABLE: 1 Learn More

TT-1334 INGERSOLL-RAND DRILLING RIG NOTE: BILL OF SALE ONLY, NO TITLE NOTE: NO AIR COMPRESSOR ON BOARD (CONNECT AUXILIARY AIR BOOSTERS & COMPRESSORS) QUANTITY: 1 Learn More

TT-1316 NONWOVEN MIDDLE SPEED NEEDLE LOOM, WORKING WIDTH 3200mm MACHINE STRUCTURE FEATURES: 1. SPLICING TYPE STRUCTURE, IT IS MADE BY HIGH QUALITY Q235 STEEL PLATE WELDING, THEN FINE TEMPERING QUALITATIVELY WITH SUFFICIENT COMPLETENESS AND STABILITY. UPPER AND DOWN MACHINE GIRDERS BOTH PRECISELY PROCESSING MACHINED. 2. ECCENTRIC BEARINGS ADOPT TORRINGTON FAMOUS BRAND 3. MAIN SHAFT IS USING 42CROMO MATERIAL. AFTER CONDITIONING TREATMENT FINE FINISHING AND GRINDING. 4. NEEDLE GIRDER HIGH SPEED TURBINE ELECTRIC LIFTING, STRIPPER PLATE TURBINE ELECTRIC LIFTING, NEEDLE GIRDER ROLLER SCALE DISPLAY. AIR LOCKED THE NEEDLE PLATE TIGHTLY. 5. NEEDLE PLATE LUOYANG MADE BY MAGNESIUM ALLOY DIE CASTING PLATE COMPOSITE PU, RADON ARRANGE NEEDLES HOLE φ1.82mm 6. INPUT PVC LATTICE, OUTPUT ROLLER ADOPTS φ155mm, HIGH QUALITY SEAMLESS STEEL PIPE, AFTER FINISHING GRINDING, THE SURFACE IS PLATED WITH HARD CHROME, UPPER ROLLER ADJUSTABLE HEIGHT AIR CYLINDER. 7. MAIN MOTOR, OUTPUT ROLLER ALL FREQUENCY CONTROL. 8. INSTALLED POWER: AROUND 15.5KW, MAIN MOTOR 11 KW. QUANTITY: 1 SET Learn More

T-6502 COMPLETE CORRUGATED PLANT, YEAR 1992 TO 2023 Learn More

P-5041 JOPER CAST IRON ROASTER 3 KILOS

JOPER
CAST IRON ROASTER
3 KILOS
DESIGNED FOR RUGGED EFFEICIENT COFFEE
INDUSTRAI STYLE ROASTING
JOPER USES DURABLE CAST IRON AND CARBON STEEL MATERIAL WITH INSULATED FIREBOX AND INSULATED ROAST CHAMBER FOR A VERY QUIET, EFFICIENT ENERGY OPERATION
FEATURE NEW LOW NOX BURNER.
MULTIPLE THERMOMETERS AND TEMPERATURE DISPLAYS GIVE THE OPERATOR THE INCOMING AIR AND BEAN TEMPERATURE INFORMATION
ITS EXCLUSIVE HEAT CONNECTION TRASNFER AND COOLING SYSTEM MAKE THE JOPER AN OUTSTANDING ROASTER.
THIS ROASTER NOW HAS ON-BOARD COOLING ENABLING SIMULTANEOUS COOLING AND ROASTING.
THIS ROASTER IS MADE TO ROAST AND COOL BOTH AT THE SAME TIME.
4 MOTORS BOARD FOR TOTAL CONTROL AND REAP PRODUCTION

DATA:
LOAD 6.6 POUNDS WITH MINIM 2.2 POUNDS 26 POUNDS PER HOUR
POER 12 AMP 110/60 1 PHASE OR 220/50 1 PHASE
WEIGHT 726 POUNDS
5 INCHES EXHAUST
MANUAL MODEL ONLY
THE :FOOT PRINT SIZES” IS 42 INCHES WIDE INCLUDING REMOTE CHAFF COLLECTOR, 64 INCHES FRONT TO BACK INCLUDING THE CHAFF COLLECTOR ATTACHED AND 56 INCHES TALL
SHIPS AT 600 POUNDS – IN CRATE OF 48 INCHES x 70 INCHES x 62 INCHES
BURNER POWER: 51,000 BTU
BUILT TO UL295 STANDARDS

QUANTITY: 1

Learn More

THIS MACHINE PROVIDED WITH A BRAKING SYSTEM WHICH PERMITS THE FILLING OF WADDING PILLOWS AND QUILTS WITH ALL MATERIALS (POLYESTER, FEATHER, EXPANDED POLYURETHANE, COTTON, WOOL, ETC.) THE PARTICULAR WIDENED SHAPE OF THE TURBINE MAKES IT POSSIBLE TO OBTAIN REMARKABLE PERFORMANCES IN THE FILLING UP USING THE SPECIAL TUBE IT IS POSSIBLE TO SUCK UP THE MATERIAL DIRECTLY FROM THE VARIOUS CONTAINERS. THE BRAKING IS VERY RAPID (ABOUT 1/10 OF SECOND) AND DOES NOT REQUIRE MAINTENANCE SINCE IT IS OBTAINED THROUGH A PNEUMATIC DEVICE. THE CONTROL DEVICE IS A PNEUMATIC FOOT-LEVER WHICH LEAVES THE OPERATOR’S HANDS UNENGAGED. SAFETY MOTOR PROTECTOR SWITCH. IT CAN BE SUPPLIED BOTH IN A ONE-PHASE AND IN A THREE-PHASE VERSION. THE MACHINE IS CONSTRUCTED IN CONFORMITY WITH THE EEC DIRECTIVES 2006/42/CE, 2004/108/CE E 2006/95/CE AND SUCCESSIVE MODIFICATIONS AND MARKED CE. ON REQUEST WITH SPEED VARIATION THE FAN SPEED IS ADJUSTABLE FROM 2000 TO 4200 RPM, IN ORDER TO OPTIMIZE THE SPEED OF FILLING TO THE SHAPE AND THE SIZE OF THE PILLOW AT MAXIMUM SPEED, THE AMOUNT OF MATERIAL FILLED IS ABOUT 200 GRAMS PER SECOND. ON THE PART OF THE MACHINE THE LOAD OF THE MATERIAL, THERE ARE 2 DAMPERS. THIS PREVENTS THE OVERLOADING OF THE TURBINE AND THE BLOCK OF MATERIAL, BECAUSE WHEN I RELASE THE PEDAL, FIRST I BLOCK THE FLOW OF MATERIAL AND THEN THE AIR FLOW. THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL THE PILLOWS THAT HAVE AIR-TIGHT LINING. THE TURBINE IS MADE OF A CAST ALUMINUM. THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL, SO THE OPERATOR HAS BOTH HANDS FREE. THE APPLICATION OF THE GRIPPERS ON THE OUTLET PIPE OF THE FILLER R 3PV ALLOWS A SINGLE OPERATOR TO USE MORE FILLERS. FURTHERMORE, IT IS POSSIBLE CHANGE THE TIME THAT THE GRIPPERS STAY CLOSED. THIS ALLOWS TO SET THE AMOUNT OF MATERIAL TO PUT INSIDE HE PILLOW, WITH A GOOD PRECISION. THE TIME IS ADJUSTABLE TO FILL DIFFERENT KINDS OF PILLOWS WITH DIFFERENT AMOUNTS OF MATERIAL. QUANTITY: 1 Learn More

TT-1431 SLOT DIE COATING MACHINE, COATING WIDTH 1600mm PARAMETERS 1. COATING METHOD: SLOT DIE COATING 2. MAX. COATING WIDTH: 1600mm 3. COATING WEIGHT: 50 TO 300 GSM 4. UNIFORMITY: ≤10% 5. MECHANICAL SPEED: 1 TO 20 METERS PER MINUTE 6. COATING SPEED: THE COATING SPEED IS DETERMINED ACCORDING TO THE COATING WEIGHT, QUANTITY, ADHESIVE VISCOSITY, THE TEMPERATURE AND THE SUBSTRATE. 7. ROLLER WIDTH: 1750mm (ACTUAL WORKING WIDTH OF PAPER ROLL IS 1600mm) 8. MAX. UNWINDING DIAMETER: 1250mm 9. MAX. REWINDING DIAMETER: 950mm 10. UNWINDING TENSION: ≤600N 11. FILM UNWINDING TENSION: ≤200N 12. WINDING TENSION: ≤600N 13. GLUE MELTING SPEED: 310 KG/HOUR 14. GLUE INPUT HOSE: TEFLON TUBE 15. GLUE MELTING TEMPERATURE: ABOUT 260°C MAXIMUM 16. MECHANICAL POWER: ABOUT 40 KW 17. INSTALLED POWER: ABOUT 110 KW 18. POWER SUPPLY: ABOUT 440 VOLTS, 60Hz 19. AIR SOURCE: 0.6 TO 0.8 MPA 20. WATER SOURCE: 0.15 TO 0.4 MPA CIRCULATING COOLING WATER 21. DIMENSIONS: 9000 (LENGTH) X 6600 (WIDTH) X 2300mm 22. THE AMOUNT OF GLUE AND THE GLUE SPEED ARE TRACKED SYNCHRONOUSLY, AND CAN ALSO BE ADJUSTED INDEPENDENTLY QUANTITY: 1 Learn More