Search results for: 'Electrical sa'

REFERENCE NUMBER: M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL TYPE: SANTEX TENTER FRAME YEAR: 2003 WORKING WIDTH: 800mm UP TO 3400mm SPEED: 2 UP TO 20 M/MIN CHAIN: VERTICAL PIN CHAIN DRYER: 3 COMPARTMENTS DRYER LENGTH: 6 METERS MAX. TEMP.: 230° C HEATING: DIATHERMIC OIL OIL BOILER: GARIONI NAVAL TH 500 CAPACITY: 581 KW, MAX. TEMP. 350° C, NITROGEN COVERED TOTAL LENGTH NEEDED: APPROX. 20,000mm TOTAL WIDTH OF MACHINE: 6,200mm TOTAL HEIGHT OF MACHINE: 3,100mm ENTRY COMBINATION GUIDING CHAIN FOR A-FRAMES CORRECT POSITIONING RUBBERIZED ROLLERS AS INFEED UNIT WECO IMPREGNATION UNIT, CONTROL AND TANK ROLLER WITH LOAD CELL MAHLO WEFT STRAIGHTENER, TYPE: RFMC-10A 6 MEASURING HEADS, WW 4200mm OPERATION PEDESTAL OPERATION PANEL, MONITOR 1 UPPER INFEED ROLLER + 1 BENDED ROLLER E+L FABRIC INFEED VERTICAL PIN CHAIN 3 SECTIONAL DRYER (6 M) COOLING UNIT AT EXIT 2 CAMERAS VIDEO CONTROL STRETCH WORK: 2 PRESSING ROLLERS 3 HEATED DRAG ROLLERS WITH SINGLE DRIVE TEMPERATURE 80° C TO 250° C ON-WINDING UNIT FOR A-FRAMES ELECTRICAL CABINET QUANTITY AVAILABLE: 1 Learn More

TT-8653 ARIOLI OPEN-WIDTH WASHING MACHINES, WIDTH 2000mm, YEAR 1988 1. OPEN-WIDTH WASHING MACHINES FOR AFTER PRINTING 2. BRAND: ARIOLI 3. YEAR: 1988 4. WIDTH: 2000mm QUANTITY: 1 Learn More

TT-8547 KUSTERS BLEACHING LINE, WIDTH 3600mm, YEAR 1991, 50 Hz 1. KUSTERS BLEACHING LINE 2. MAX. FABRIC WIDTH 3600mm 3. ROLLER SURFACE WIDTH: 3800mm QUANTITY: 1 Learn More

TT-7928 SHEARLINE SL41 ROLLER DIE-CUTTER – NEW, 41” 1. SHEARLINE SL41 ROLLER DIE CUTTER 41” 2. TYPE: NEW FLATBED ROLLER DIE CUTTERS 3. BRAND: SHEARLINE 4. MODEL: SL41 QUANTITY: 1 Learn More

TT-7864 SIDEL LINE, 32,000 BPH, YEAR 2001 TO 2020 1. SIDEL LINE 2. 32,000 BPH 3. STILL IN PRODUCTION AND WILL BE DISMANTLED IN SEPTEMBER Learn More

TT-7704 ALBRECHT BAUMER OFS-VT VERTICAL CNC FOAM CUTTING MACHINE 1. ALBRECHT BAUMER OFS-VT VERTICAL CNC FOAM CUTTING MACHINE 2. VERTICAL CNC CONTOUR CUTTER ALBRECHT BAUMER 3. MODEL OFS-VT 4. USED MACHINE QUANTITY: 1 Learn More

YY-2085-B STAMP EMBOSSING MACHINE FOR SALE, WORKING WIDTH 1800mm QUANTITY: 1 STATUS: NOT DISMANTLED, INSPECTION AVAILABLE Learn More

TT-7745 BIOMASS POWER PLANT, 5 MW, YEAR 2008 TO 2010 1. BRAND: BIOMASS POWER PLANT 2. 5 MW 3. CONDITION: USED QUANTITY: 1 Learn More

TT-7656 PCMC IR500 INDUSTRIAL ROLL TOWEL LINE, WIDTH 2743mm, YEAR 2002 1. PCMC IR500 INDUSTRIAL ROLL TOWEL LINE 2. WEB WIDTH: 2743mm 3. 1ST UNWIND ROLL DIAMETER: 1600mm 4. 2ND UNWIND ROLL DIAMETER: 1829mm QUANTITY: 1 Learn More

TT-7587 SIEMENS TG50D5/W701DS GAS TURBINE GENERATOR, 127.8 MW, YEAR 1995 1. SIEMENS WESTINGHOUSE TG50D5/W701DS 127.8 MW GAS TURBINE GENERATOR PACKAGES FOR SALE. THE TURBINE PACKAGES TOGETHER OFFER 255 MW READY TO SHIP EQUIPMENT. THIS TECHNOLOGY IS ONE OF THE MOST WIDESPREAD MIDDLE SIZE ENGINES (100-104 MW) FOR POWER GENERATION AND THE ONLY TURBINE OF ITS SIZE THAT CAN OPERATE ON HEAVY FUEL OIL (HFO). 2. THE UNITS ARE OFFERED WITH SOME OF THE REQUIRED BALANCE OF PLANT BY SEPARATE NEGOTIATION. 3. THESE UNITS WERE INSTALLED AND OPERATED IN A POWER STATION FROM 1996 UNTIL THE END OF 2004, WHEN THEY WERE DISMANTLED AS THE RESULT OF A PLANT UPGRADE. THE UNITS WERE PURCHASED AND UPGRADED BY THE BUYER TO 127.8 MW NOMINAL CAPACITY EACH. THEY ALSO FULLY REFURBISHED THE UNITS TO ZERO HOURS. THE TURBINES HAVE THE CAPABILITY OF BEING ABLE TO SWITCH BETWEEN NATURAL GAS AND LIQUID FUEL WHILE STILL OPERATING UNDER LOAD. QUANTITY: 2 Learn More