Search results for: 'Lock st'

INVENTORY NUMBER: E-9860 FIBER OPENING MACHINE USED TO OPEN POLYESTER FIBERS FOR PILLOW FILLING, PLUSH STUFFED TOY, SOFA, CUSHION, BEDDING, DECORATIVE PILLOW AND QUILT ETC. THE MACHINE IS MAINLY USED FOR OPENING REGULAR OR HOLLOW CONJUGATE SILICONIZED POLYESTER FIBER SHORTER THAN 100mm LENGTH (4 INCHES). HIGH OUTPUT. WITH METAL ALARM SYSTEM PROTECTING THE OPENER ROLLER, AVOIDING DAMAGE TO ROLLS. ASSEMBLED WITH METALLIC SELF-LOCK WIRE SO THAT THE FIBER CAN BE OPENED FOR MORE THAN 98% AND NOT BE DAMAGED. 150KG TO 320KG PRODUCTION PER HOUR DEPENDING ON THE DIFFERENT MACHINE MODELS AND FIBERS. BALANCED ROLLERS. ELECTRONIC OVERLOAD PROTECTION. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4831 HOPPER WITH AUTOMATIC FIBER OPENER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5282 (1313121ANW12RX) L COSMETIC ROUND PADS PACKAGING MACHINE INTO BAGS NEW IN STOCK COSMETIC ROUND PADS PACKAGING MACHINE INTO BAGS FULLY AUTOMATIC MACHINE FOR PACKAGING ROUND PADS MADE OF COTTON OR SYNTHETIC FIBERS FOR COSMETIC USE IN DRAWSTRING BAGS AND BAGS WITH ZIPPER/ZIP-LOCK MADE OF PLASTIC MATERIAL. THE MACHINE REACHES THE MAXIMUM PERFORMANCE OF ABOUT 30 BAGS PER MINUTE. QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-4553 FOAM MACHINERY FOR SALE QUANTITY AVAILABLE: 33 LOTS Learn More

DISPENSER SILOS FOR MATERIALS FOR SHORT STAPLE (POLYESTER, FEATHER, FOAM RUBBER, MIXTURES, ETC.) THE CYLINDRICAL SHAPED SILOS HAS GOT A CAPACITY OF 3 CUBIC METERS A MIXER, IN THE SILO, KEEPS THE MATERIAL IN MOTION AND FACILITATES IT IS GOING OUT. IT IS POSSIBLE TO CONNECT TWO FILLER MACHINE AND/OR TWO WORKSTATIONS. THE MIXER HAS “SOFT – START” DEVICE FOR A LONG LIFE OF MOTOR AND GEARBOX. ELECTRIC PLANT IN WATERTIGHT CABINET (IP 55) WITH DOOR-LOCK ISOLATOR, TELEMOTOR PROTECTOR, SAFETY END OF STROKE AND LOW-TENSION CONTROLS. Learn More

A) HOPPER MODEL L1500 MIXING SYSTEM B) OPENER MODEL F1000 – FOR THE FIRST OPENING OF THE FIBERS C)DISPENSER SILOS MODEL C5 D) SHREDDING MACHINE – SHREDDING FOAM MODEL F430 E) FILLING MACHINE WITH ELECTRONIC CONTROL WEIGHT MODEL W11 F) SPECIAL SEWING MACHINE MODEL 164C Learn More

REFERENCE NUMBER: M-3744 (9902TGML8U)-D ATLANTA ATTACHMENT BAND AND HEALTH MACHINE MEASURES BORDER, SETS HANDLES (4 OR 8), MEASURES, CUTS AND CLOSES BORDER ACCOMMODATES 8 ROLLS OF HANDLE FOR QUICK CHANGEOVER AUTOMATICALLY DETECTS AND CUTS OUT SPLICES AND DEFECTS LOCKSTITCH SEWING HEAD FOR CLOSING BORDER WITH NEEDLE POSITIONER, AUTOMATIC THREAD TRIMMER & PRESSER FOOTLIFT FEEDS PRE-MADE HANDLES FROM ROLL CAPACITY UP TO 15" BORDERS STORES UP TO 22 STYLES PROGRAMMABLE BOX "X" TACKER SERIAL BUS CONTROL SYSTEM WITH TOUCH SCREEN UNCONDITIONALLY GUARANTEED THREE YEARS SELF-DIAGNOSTIC SOFTWARE HEAVY-DUTY GUILLOTINE CUTTER WITH TEMPERED BLADES HEAVY-DUTY FEEDING MODULE WITH URETHANE ROLLERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3009

ATLANTA ATT 3300R AUTOMATIC BORDER MEASURE,  SEW AND HANDLE ATTACHING MACHINE WITH LABEL GOVERNMENT LABEL ATTACHING

 

BAND AND HEALTH MACHINE

8 POSITIONS TO PUT THE SPOOLS WITH THE HANDLE MATERIALS.

AUTOMATIC HANDLE TACKER, BORDER MEASURE, INSERT LAW LABEL AND CLOSE WORKSTATION

BRAND: ATLANTA ATTACHMENT

MODEL: 3300R

IT CAN PUT MATERIAL STYLE HANDLERS ON AUTOMATICALLY

THE FOLLOWING HEADS ARE ON THIS UNIT: MITSUBISHI PLKE 1010, LS2-1380 AND 1959Y28B

THIS MACHINE IS MADE OF (3) SEWING HEADS

(A) MITSUBISHI PLKE 1010

(B) LS2-1380

(C) 1959Y28B

THE FIRST TWO MACHINES MODEL: 3300R

THE LAST MACHINE’S MODEL: 1959Y28B

 

THE MACHINE HAS AT THE BEGINNING A SHAFT WITH 8 PLASTIC ROLLERS THAT ALLOW THE PULLING OF THE BORDER FORWARD

 

MEASURES BORDER, SETS HANDLE (4 OR 8), MEASURE, CUTS AND CLOSES BORDER

ACCOMODATES 8 ROLLS OF HANDLE FOR QUICK CHANGEOVER

AUTOMATICALLY DETECTS AND CUTS OUT SPLICES AND DEFECTS

LOCKSTITCH SEWING HEAD FOR CLOSING BORDER WITH NEEDLE POSITIONER, AUTOMATIC THREAD TRIMMER & PRESSER FOOTLIFT

FEEDS PRE-MADE HANDLES FROM ROLL

CAPACITY UP TO 15" BORDERS

STORES UP TO 22 STYLES

PROGRAMMABLE BOX "X" TACKER

SERIAL BUS CONTROL SYSTEM WITH TOUCH SCREEN UNCONDITIONALLY GUARANTEED THREE YEARS

SELF-DISGNOSTIC SOFTWARE

HEAVY-DUTY GUILLOTINE CUTTER WITH TEMPERED BLADES

HEAVY-DUTY FEEDING MODULE WITH URETHANE ROLLER

 

MAX SEWING SPEED (RPM):       CLOSER-5000                      TACKER-2300

FACTORY PRESET SPEED (RPM):                 CLOSER-1800                      TACKER-1500

MAX STITCH LENGTH (SPI):          CLOSER-6                            TACKER-8

NEEDLE SYSTEM:                              CLOSER-SNDLX1140        TACKER-SN135X1722

NEEDLE SIZE:                                      CLOSER-22 to 140             TACKER-22 to 140

WEIGHT OF MATERIAL:                 CLOSER & TACKER-MEDIUM

VOLTAGE (V/PH/HZ):                     CLOSER & TACKER- 22V 1PH 60HZ

CURRENT (AMPS):                           CLOSER & TACKER- 5

MOTOR TYPE:                                    CLOSER & TACKER- EFKA DC

AIR PRESSURE (PSI):                       CLOSER & TACKER- 80

AIR CONSUMPTION (CFM):         CLOSER & TACKER- 6

SHIPPING WEIGHT (LBS):              CLOSER & TACKER- 2250

SHIPPING DIMENSIONS:                               CLOSER & TACKER- 65 x 110 x 88

 

DESCRIPTION FROM WEB PAGE MAY NOT FIT MACHINE DESCRIPTION EXACTLY

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4868 (1111275NKG10RX) L PUB BREWERY 20HL SPECIFICATION: 1. MALT HANDLING - CYLINDER-CONIC MALT SILO WITH 25M³ CONTENT, MADE IN FIBRE GLASS / PLASTIC, STANDING OUTDOOR ON STEEL CONSTRUCTION - MALT CONVEYORS / SPIRAL CONVEYOR INTO 1ST FLOOR - 2-ROLLER MALT MILL - GRIST CASE - FALL PIPE IN MASH COPPER (FOR DUST FREE MASHING-IN) - GIBBET-LIFT FOR BAGGED SPECIAL MALTS 2. BREWHOUSE TOWER BREWHOUSE FOR 20 HL / BREW, COMPLETE IN STAINLESS STEEL, BUILT 1994, STEAM HEATED, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, 2 CRANE EYELET, 2 STAINLESS STEEL PLATFORM, WITH: - MASH- / WORT COPPER WITH BOTTOM HEATING ZONE AND INTERIOR COOKER, SIDEWAYS AGITATOR, MANWAY ENTRANCE HATCH, LIGHTNING, STEAM REGULATION VALVE - LAUTER TUN, WITH STAINLESS STEEL RAKING MACHINE WITH SEW-DRIVE FROM TOP, WITH SPENT GRAINS SLIDER, STAINLESS STEEL FALSE BOTTOM, SPENT GRAINS HATCH, VERTICAL SIGHT GLASS, LIGHTNING, SPRAY HEAD, DOME LID WITH BUILT IN CONTROL CABINET - SPINDLE STATION WITH WASHING TABLE IN STAINLESS STEEL, ABOUT 1,5M WALL ASSEMBLED - HOT WATER TANK, WITH 30 HL, IN STAINLESS STEEL, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, HEATABLE, WITH MANWAY IN THE WALL, LEVEL DISPLAY - PRESSURE RAISING PUMP - WORT COOLING, 1-STAGE PLATE APPARATUS - WORT AERATION IN STAINLESS STEEL 3. FERMENTING- AND STORAGE TANKS - 5 CCTS, WITH 40 HL NET / 46 HL GROSS CONTENT, ALL TANKS 3 BAR, BUILT 1994, STANDING ON FEET, PI-ISOLATED FULLY WELDED WITH STAINLESS STEEL JACKET, WITH JACKET COOLING FROM CONE BELOW TO ½ WALL 60 LT COOLING JACKET 3 BAR, WITH MANWAY IN THE WALL, 2 OUTLETS WITH BUTTERFLY VALVES, TEMPERATURE SENSOR PT100, SPRAY HEAD, PULLED DOWN CLEANING PIPE WITH BUTTERFLY VALVE, BUNGING ARMATURE, OVER PRESSURE VALVE, SAMPLER, 2 CRANE EYELETS, 2 OF THE TANKS WITH LEVEL DISPLAY - DIGITAL TEMPERATURE CONTROL FOR 5 TANKS IN STAINLESS STEEL CONTROL CABINET - CIRCULATING PUMP IN STAINLESS STEEL, MOBILE, WITH SWITCH - MANY GOOD BEER HOSES - 6 X 10 HL BEER DISPENSING TANKS, MAKE DUO TANK, BUILT 2002, 3,0 / 4,3 BAR, COOL ABLE, ISOLATED WITH STAINLESS STEEL-JACKET FULLY WELDED, FOR INLINE-OPERATION, LYING IN RACK, SCREWED STAINLESS STEEL RACK, WITH PRESSURE ARMATURE, OUTLET ARMATURE WITH REDUCTION TO BARE CONNECTION, MANWAY WITH BIG SIGHT GLASS IN MANWAY LED - PANEL FOR 3 TYPES OF BEER 4. FILLING COMBINED BOTTLE-/KEGGING PLANT, WITH 1 CLEANING TUB, HEATED AND 1 REBUILT KEG: - BOTTLE CLEANING MACHINE FOR CLEANING OF 8 BOTTLES INSIDE AND OUTSIDE, FOR UP TO 2LT BOTTLES - BOTTLE FILLING STATION WITH HUB CYLINDER FROM BELOW, WITH SPLINTER PROTECTION - COMBINED KEG-CLEANING- AND FILLING STATION - BUILT IN CONTROL CABINET WITH SIEMENS S5 CONTROL AND OPERATING CONSOLE OP 7 5. OTHER EQUIPMENT - STEAM BOILER FOR ABOUT F280 KG/H, WITH GAS BURNER, FULLY SERVICED ON 4TH AUGUST 2014, BUILT IN 1994 - CONDENSATE TUB IN STAINLESS STEEL AT WALL AND SECOND SMALL S/S-TUB - WATER TREATMENT - STEAM REGULATION AND CONDENSATE VALVES IN CYCLE - STAINLESS STEEL CHIMNEY PLANT ABOUT 8-10M - AIR COMPRESSOR WITH WIND KETTLE, BUILT 1994 - COOLING PLANT / COLD WATER PLANT, MAKE L&R KÄLTETECHNIK, TYPE: WRK-17/SL/-5, PLANT BUILT 1997, COOLING AGENT R 407 C, WITH NEW COMPRESSOR AND NEW PLATE HEAT EXCHANGER IN 2014 FOR 10,000 € INVESTED, EVAPORATOR WITH 2 VENTILATOR OUTSIDE HANGING ON THE WALL 6.1 OTHERS - ABOUT 100 KETS, MAKE SCHÄFER, PLUS-KEGS, FLAT FITTING IN DIFFERENT SIZES, NEUTRAL - PARTY-KEGS, WITH BAVARIAN TAP, PU-COVERED IN BLACK AND WITH WOOD-OPTIC - ABOUT 800 NEUTRAL CLIP LOCK BOTTLES EACH 1 LT 6.2 DIMENSIONS THE ROOM HEIGHT IN BREWHOUSE AND CCTS IS 4.50M. THE PLANT AS ASSEMBLED ON 10.75 X 4.38M. PLEASE NOTE THAT THE BREWERY IS ONLY AVAILABLE AS A SINGLE SALE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4791 (111121RV10U) L DOUBLE NEEDLE COMPOUND FEED WALKING FOOT LOCKSTITCH SEWING MACHINE TYPICAL GC20606-D2T3 SEWING MACHINE DOUBLE NEEDLE COMPOUND FEED WALKING FOOT LOCK STITCH WITH FULL AUTOMATIC OPTIONS GAUGE IS 1/4” QUANTITY AVAILABLE: 8 Learn More