Search results for: 'Generator power pla'

TT-3784 SOLAR TAURUS 60 TURBINES, 5200KW, YEAR 2018 TO 2000 BRAND: SOLAR MODEL: TAURUS 60 YEAR: 2018 QUANTITY: 2 Learn More

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

TT-4988 COGENERATION POWER PLANT, 80MW, YEAR 2009 QUANTITY: 1 Learn More

TT-2168 WARTSILA ENGINE 18V46D (POWER PLANT) HFO, 15,611MW QUANTITY: 3 Learn More

TT-1765 MITSUBISHI 18KU30A POWER PLANT, 50Hz, 5.6MW, YEAR 1998 FUEL: DIESEL NOTE: HFO/MDO QUANTITY: 8 Learn More

TT-1745 GE 9E POWER PLANT WITH 15,609 HOURS, 112.45MW, 11.5KV FUEL: GAS/LIQUID QUANTITY: 1 Learn More

TT-1647 WARTSILA W18V32 POWER PLANT, 60Hz 7MW, YEAR 2001 NOTE: HFO/MDO, DELIVERY: 5 MONTHS QUANTITY: 5 Learn More

REFERENCE NUMBER: M-5361 (22018CCUDF1R) L DEUTZ TBG 632V16 NATURAL GAS 9900MW POWER PLANT YEAR 1999 – COMPLETELY OVERHAULED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5360 (220265ZSLQ1R) L JENBACHER JMS 620 GS-NL NATURAL GAS 16.2MW POWER PLANT YEAR 2004 – OVERHAULED 2012 16.2 MW POWER PLANT (6) X 2.7MW JENBACHER JMS 620 GS-NL NATURAL GAS FUELLED ENGINE – GENERATORS MANUFACTURED IN YEAR 2004 LAST OVERHAUL IN YEAR 2012 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5359 (220NTSNXX1) L JENBACHER JMS 620 GS-NL NATURAL GAS 10.8MW POWER PLANT YEAR 2010 10.8 MW POWER PLANT (4) X 2.7 MW JENBACHER JMS 620 GS-NL, NATURAL GAS FUELLED ENGINE-GENERATORS MANUFACTURED IN YEAR 2010 QUANTITY AVAILABLE: 1 Learn More