Search results for: 'air tab'

R-7070 COFFEE ROASTING MACHINE (FOR INDUSTRIAL USE) 840N

POWER CONSUMPTION: 6000 WATTS
BAKING CAPACITY: 40 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 90 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: GAS
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 2950 X 1750 X 3080mm
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
12-STAGE DAMPER FINE-TUNING
OPTIONAL EGG BEANS AUTOMATIC FEEDING
MACHINE OPTIONAL COFFEE HOT BEAN SORTING (STONE AND IRON CAN BE REMOVED)

QUANTITY: 1

R-7069 COFFEE ROASTING MACHINE (FOR INDUSTRIAL USE) 820N

POWER CONSUMPTION: 5000 WATTS
BAKING CAPACITY: 20 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 90 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS OR NATURAL GAS
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 2310 X 1180 X 3070mm
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
12-STAGE DAMPER FINE-TUNING
OPTIONAL EGG BEANS AUTOMATIC FEEDING
MACHINE OPTIONAL COFFEE HOT BEAN SORTING (STONE AND IRON CAN BE REMOVED)

QUANTITY: 1

R-7068 COFFEE ROASTING MACHINE (INDUSTRIAL) 810N

1 PS PACKAGE VOLUME (L X W X H): 2160 X 1650 X 2100mm
1 PS PACKAGE TOTAL WEIGHT: 750 KG
POWER CONSUMPTION: 1800 WATTS
BAKING CAPACITY: 12 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 120 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS (LPG) OR NATURAL GAS (LNG)
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 2600 X 1000 X 2300mm
PRODUCT WEIGHT: ABOUT 650 KILOGRAMS
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
15-STAGE DAMPER FINE-TUNING

QUANTITY: 1

R-7066 COFFEE BAKING MACHINE (INDUSTRIAL) 803N

1 PS PACKAGE VOLUME (L X W X H): 1240 X 1180 X 1180mm
1 PS PACKAGE TOTAL WEIGHT: 370 KG
POWER CONSUMPTION: 450 WATTS
BAKING CAPACITY: 4 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 100 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS (LPG) OR NATURAL GAS (LNG)
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 1700 X 600 X 1700mm
PRODUCT WEIGHT: ABOUT 240 KG
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
13-STAGE DAMPER FINE-TUNING

QUANTITY: 1

R-7067 COFFEE ROASTING MACHINE (FOR INDUSTRIAL USE) 805N

MECHANICAL DIMENSIONS (L X W X H): 1580 X 1310 X 1850mm
MECHANICAL WEIGHT: ABOUT 420 KG
1 PS PACKAGE VOLUME (L X W X H): 2300 X 900 X 1900mm
1 PS PACKAGE TOTAL WEIGHT: 570 KG
POWER CONSUMPTION: 1200 WATT
BAKING CAPACITY: 6 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 120 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS OR NATURAL GAS
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
13-STAGE DAMPER FINE-TUNING

QUANTITY: 1

M-6498 FOAM SKIVING MACHINE FOR PRODUCTION OF INDENTED FOAM SURFACES

MACHINE IS SUPPLIED WITH ONE PATTERN , UNLIMITED NUMBER OF PATTERNS CAN BE MADE

MAXIMUM WIDTH 1900mm = 76 INCHES X 2100mm LONG = 82.6 INCHES

MAXIMUM HEIGHT OF CUT 250mm = 9.8 INCHES
TABLE LENGTH 2200mm = 86.6 INCHES
TLBLE SPEED 5 TO 25 METERS PER MINUTE
INSTALLED POWER 15 KW
AMPERAGE = 30 APMS
MACHINE WEIGHT 4876 KGS – 10,727 LBS
AIR PRESSURE NEEDED ; 6 BAR – 90 PSI
CUTTING IS DONE BY 80mm WIDE BLADE
DESIGNS ARE MADE ON MDF WOOD BY A CNC ROUTER MACHINE (NOT INCLUDED)

QUANTITY: 1

P-3516 BALEMASTER AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR YEAR 1989

BALEMASTER
AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR
YEAR: 1989
6’ WIDE x 32’ LONG INCLINED LOADING BELT CONVEYOR:
ORIGINAL INSTALLATION:
THE ENTRANCE WAS BELOW FLOOR LEVEL ALLOWING FLOOR LEVEL, PUSH-TYPE LOADING. PRODUCT THEN FALLS ONTO A SHORT SECTION OF SHREDDER FEEDING CONVEYOR
EQUIPPED WITH:
24 INCHES HIGH SIDE GUIDES
AUTO BELT TRACKING

BALEMASTER
SERIES 1350J-62 PAPER SHREDDER
62 INCHES WIDE
SPECIFICATIONS:
MOUNTED TO TOP OF BALER FEED CHUTE
WAS USED FOR MAGAZINE EDGE TRIM & NEWSPAPER, BUT CAN BE USED FOR OTHER MATERIALS

BALEMASTER
MODEL: 4025C-8
AUTO TIE BALER
YEAR: 1989
SPECIFICATIONS:
MATERIALS: NEWSPRINT, MAGAZINES, CORRUGATED CHIPBOARD, FIBERBOARD, BOXBOARD
BALESIZE: 28 INCHES W x 36-1/2 INCHES H x UP TO 84 INCHES LONG
BALE WEIGHT: 1,440 POUNDS @ 72 INCHES LONG
OPENING SIZE: 17 INCHES x 32 INCHES
BALER HEIGHT: 48 INCHES
BALER HEIGHT WITH CHUTE: 72 INCHES
CYLINDER DIAMETER: 8 INCHES
THRUST: 150,900 POUNDS @ 3,000 PSI
NUMBER OF WIRE REELS: 5 @ 100 POUNDS EACH
(10) AUTO TWISTER HOOKS, (5) CUTTERS PER SIDE

EQUIPPED WITH:
AIR COOLED HYDRAULIC OIL COOLER FOR CONTINUOUS OPERATION WITH ITS OWN MOTOR & PUMP WATER SPRAY SYSTEM
(2) 5’ LONG BALE TAKE-AWAY TABLES

MOTOR DATA: 25 HP BALER, 230/460/60/3

NOTE: INSTALLATION ASSISTANCE AVAILABLE

QUANTITY: 1

REFERENCE NUMBER: F-1429

down FILLING MACHINE MODEL SR-3

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

•             TYPE : SR-3

•             DIMENSION: 3000 x 2500 x 2000MM

•             VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•             POWER: 3.8 KW

•             FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±0.2G

•             AIR PRESSURE: 0.5 TO 0.8MPA

•            THE DEVELOPED COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC THAT ARE MADE WITH DOWN & FEATHER AND CONTROLLED BY A COMPUTERIZED WEIGHING SYSTEM.

•             THREE HOPPER-SYSTEM FOR CONSTANT SUPPLY

•             THE VACUUM FILLING FUNCTION THAT DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT-HAND FEELING.

•             ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT BY CHOOSING GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL, SO THAT THE PRODUCTION QUALITY IS ASSURED AND MATERIAL WASTE IS CONTROLLED

•             THE WHOLE LINE CAN BE HANDLED BY ONE OPERATOR WITH VERY SIMPLE

OPERATION

•             ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•             KEY ELECTRICAL COMPONENTS ARE IMPORTED

•             THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•             ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS, WHICH IS ENOUGH TO FILL DIFFERENT PARTS OF THE SAME PRODUCTION.

•             THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTED

•             THE CUSTOMER’S DIFFERENT REQUIREMENTS ARE CONSIDERED BY OUR PROFESSIONAL ENGINEERS SO THAT THE MACHINES ARE SUITABLE FOR YOUR PARTICULAR NEEDS

•             MATERIAL HOPPER: DIA.1200 x 2000MM               1PCS

•             WEIGHING SYSTEM: 1200 x 1000 x 1000MM         1PCS(3SETS)

•             FILLING TABLE :1200 x 550 x 1500                               1PCS

•             PLC CONTROL SYSTEM AND CONTROL PANEL:     1SETS

•             BLOWER:                                                                             3PCS

•             PIPE SYSTEM

REFERENCE NUMBER: F-1430

FEATHER FILLING MACHINE MODEL SR-180

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

•              TYPE : SR-180/280/380/480

•              DIMENSION: 1200 x 1500 x 2000MM

•              VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•              POWER: 2.2 KW

•              FILLING RANGE: 0.5-10 /1-50 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±0.2G/±0.5G

•              AIR PRESSURE: 0.5-0.8MPA

•              THE COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC WITH A COMPUTERIZED WEIGHING SYSTEM.

•              TWO HOPPER-SYSTEM FOR CONSTANT SUPPLY.

•              THE VACUUM FILLING FUNCTION DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•              ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 TO

0.5 GRAM (DEPENDING ON THE RANGE OF MEASURE). IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL

•              THE WHOLE LINE CAN BE HANDLED BY ONLY 1 OPERATOR BY VERY SIMPLE

OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS.

•              ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•              KEY ELECTRICAL COMPONENTS IMPORTED

•              THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•              ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•              THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTE

•              DIFFERENT REQUIREMENTS OF THE CUSTOMER CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES SO THEY ARE SUITABLE FOR YOUR PARTICULAR NEEDS

•              MATERIAL HOPPER:        1200 x 1500 x 2000MM                               1PCS

•              WEIGHING SYSTEM:        1200 x 400 x 1000MM                  1PCS

•              FILLING TABLE :1200 x 550 x 1500                                            1PCS

•              PLC CONTROL SYSTEM AND CONTROL PANEL:                     1SETS

•              BLOWER:                                                                                             1PCS

•              PIPE SYSTEM

M-6055 NONWOVEN NEEDLE FELT LINE, WIDTH 4300mm, YEAR 1970 TO 2004

OFFER 001
NONWOVEN NEEDLE FELT LINE – RENEWED 3 YEARS AGO
WORKING WIDTH: 4300mm

OFFER 002
HERGETH BALE OPENER
YEAR: 1986
WORKING WIDTH: 1000mm

OFFER 003
OILING UNIT
TANK CAPACITY: 250 LITRES

OFFER 004
AUGUST PROTT FAN FOR FIBER TRANSPORT
POWER: 7.5 KW

OFFER 005
TERMO GORING KERR METAL DETECTOR AND METAL SEPARATOR
YEAR: 2004

OFFER 006
TEMAFA MIXING BIN

OFFER 007
FOR FAN FOR FIBER TRANSPORTATION

OFFER 008
FOR CHUTE FEED WITH MOVEABLE CONDENSOR
WORKING WIDTH: 2500mm

OFFER 009
WEB DENSITY MEASURING AND AUTOMATIC ALIGNING

OFFER 010
FOR CARDING MACHINE
WORKING WIDTH: 2500mm

OFFER 011
ASSELIN CROSSLAPPER
YEAR: 1984
INPUT WIDTH: 2500mm

OFFER 012
FEHRER FIRST NEEDLE LOOM
YEAR: 1973
WORKING WIDTH: 4800mm

OFFER 013
UNWINDING FOR PRELIMINARY WEB

OFFER 014
CONVEYOR SYSTEM FOR WEB TRANSPORTATION TO SECOND NEEDLE LOOM

OFFER 015
FEHRER SECOND NEEDLE LOOM
YEAR: 1970
WORKING WIDTH: 4400mm

OFFER 016
FEHRER THIRD NEEDLE LOOM
YEAR: 1973
WORKING WIDTH: 4800mm

OFFER 017
BENEDETTI & CALAMAI TRIMMING AND WINDING UNIT
YEAR: 1995
TABLE WIDTH: 5500mm

OFFER 018
LAROCHE EDGE TRIM OPENER

QUANTITY: 1 LINE