Search results for: 'cutter f'

REFERENCE NUMBER: M-4085

CUTLAS HORIZONTAL & VERTICAL CNC CUTTER YEAR 2012 -OSCILLATING BLADES

 

CUTLAS CNC CUTTER

TYPE: CNC HK-5

HORIZONTAL & VERTICAL

MOTOR: 1 KW

WEIGHT: 3T

VOLTAGE: 10~1 W 50 HZ 380

AIR PRESSURE: 4-6

MFD: NANTONG HEALTH CARE MACHINE CO. LTD.

THIS MACHINE WORKED ABOUT 20 HOURS

Nesting software is in development

Uses Autocad 2002

 

THE BUN THAT CAN FIT ON THE MACHINE HAS THE MAXIMUM DIMENSIONS:

 

HEIGHT: 50" INCHES

WIDTH:  88" INCHES

LENGTH: 108" INCHES

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: V-1029 GERBER GT5250 MULTIFOLD LYING AND CUTTING UNIT YEAR 2004 WIDTH 1700-3300mm (130 inches) MULTIFOLD LYING-AND CUTTING UNIT MAKE GERBER, TYPE GT5250, YEAR 2004 CUTTING WIDTHS 1700mm, 2000mm, 2400mm AND 3300mm CUTTING HEIGHT 5.2 CM, CUTTING LENGTHS 170, AND 254 CM (MAXIMUM) CUTTING SPEED 30.5 M/MIN HEAD SPEEDING UP 2.4 M\S, WITH C-200 CONTROL UNIT AND SOFTWARE THE CUTTER WORKED LESS SEE PHOTOGRAPHS, CONDITION VERY GOOD REFERENCE NUMBER: V-1029 GERBER GT5250 MULTIFOLD LYING AND CUTTING UNIT YEAR 2004 WIDTH 1700-3300mm (130 inches) MULTIFOLD LYING-AND CUTTING UNIT MAKE GERBER, TYPE GT5250, YEAR 2004 CUTTING WIDTHS 1700mm, 2000mm, 2400mm AND 3300mm CUTTING HEIGHT 5.2 CM, CUTTING LENGTHS 170, AND 254 CM (MAXIMUM) CUTTING SPEED 30.5 M/MIN HEAD SPEEDING UP 2.4 M\S, WITH C-200 CONTROL UNIT AND SOFTWARE THE CUTTER WORKED LESS SEE PHOTOGRAPHS, CONDITION VERY GOOD TABLE LENGTH 8500mm (28 FEET) MACHINE IS ON THE MILL FLOOR CAN SEE IT RUNNING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-9488 NONWOVEN LINES FOR GEOTEXTILES 3200mm TO 5000mm A) NEEDLING LINE FOR GEOTEXTILE B) NEEDLING LINE FOR GEOTEXTILE QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: A-1243 (0101GHBXX12) A MACHINERY AND EXTRUSION RELATED MACHINES REFERENCE #102: 1 BARMAG EXTRUDER DIA. 90 WITH CONTROL PANEL REFERENCE #103: 4 BARMAG EXTRUDERS 28 MM REFERENCE #104: 1 PLASTICIZERS EXTRUDER 40 MM REFERENCE #105: 1 PLASTICISERS EXTRUDER 20 MM REFERENCE #108: 1 NYLON POLYMER DRYER REFERENCE #110: 50 SAHM WINDERS TRAVERSE 200 MM X CORE 35 MM REFERENCE #111: 32 SAHM WINDERS – TRAVERSE 200MM X CORE 35 MM REFERENCE #113: 31 LEESONA WINDERS – TYPE 969 – TRAVERSE 300 MM REFERENCE #114: 9 SAHM WINDERS TYPE 280 – TRAVERSE 300 MM + PANEL REFERENCE #119: 1 OVEN - BARMAG LONG 3000 MM X ENTRANCE 1400 MM REFERENCE #127: 1 SETS OF GODETS 7 ROLLERS – 1150 MM X 200 MM DIA – 2 HEATED ROLLERS AND 1 CHILLED ROLLER + OIL HEATER - BARMAG REFERENCE #129: 1 SET OF GODETS 3 ROLLERS – 1150 X 200 MM DIA - BARMAG REFERENCE #131: NEW PARTS OF A RECYCLING LINE – DIA 120 MM – NEW SCREW – WITH SPAGHETTI DIE – + DAVID BROWN GEARBOX FOR A 150 HP MOTOR REFERENCE #132: 1 LABORATORIUM LDPE “PLASTICIZERS” – EXTRUDER 20MM REFERENCE #134: 1 SEMI-AUTOMATIC BALING-PRESS, PRESSURE 60 TONS, AUTEFA REFERENCE #134B: 1 HORIZONTAL PRESS REFERENCE #137: 1 NEUMAG STAPLE FIBRE CRIMPER – ENTRANCE 80 MM REFERENCE #139: 1 NEUMAG WITRAS 6008R FOR 8 ENDS – ALMOST NEW, ONLY USED FOR A FEW MONTHS YEAR 2000 REFERENCE #142: OIL HEATERS REFERENCE #143: INOX WATERBATH – WIDTH 1200 MM REFERENCE #144: INOX WATERBATH – WIDTH 750 MM REFERENCE #146: SEVERAL SAHM WINDERS FOR CF YARN REFERENCE #147: SEVERAL BARMAG SPINNZWIRN LFW 25 WINDERS REFERENCE #148: STAPLE FIBER CUTTER – TYPE LUMMUS –WITH 2 CUTTER REELS WITH KNIVES REFERENCE #152: 1 SCREENCHANGER – AUTOSCREEN - WAS FITTED ON A 45 MM EXTRUDER REFERENCE #153: SEVERAL FLAT TAPE DIES – 800 MM WIDTH – REFERENCE #164: 2 FANS WITH MOTORS OF ABOUT 12 KW REFERENCE #165: 1 SPAGHETTI DIE REFERENCE #167: 36 SAHM FLANGE WINDERS – TYPE 211 + PANEL QUANTITY AVAILABLE: 35 Learn More

REFERENCE NUMBER: M-5184 (1313243YS12UF) L COSMETIC COTTON PAD MAKING MACHINE (24,000PCS/H) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5090 (12123ZQT11E) L JAMES HEAL NU-MARTINDALE ABRASION AND PILING TESTER MODEL 406 6 PILING STATIONS JAMES HEALS NU-MARTINDALE ABRASION AND PILING TESTER MODEL 406 STATUS: STILL OPERATIONAL CONDITION: EXCELLENT AVAILABLE: IMMEDIATELY QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3013 (770OIGFXX6)-D SPUHL ANDERSON PC6 PANEL CUTTER SPUHL ANDERSON PANEL CUTTER 95” MODEL PC6 YEAR OF PRODUCTION: CE 97 OPERATION VOLTAGE: 220 VAC CONTROL VOLTAGE: 110 VAC CONTROL VOLTAGE: 24 VDC TOTAL NOMINAL CURRENT: 10A MAIN SUPPLY FUSE: 25A FREQUENCY: 60HZ CONTROL VOLTAGE: 15VDC MAX. WORKING WIDTH: APPROX. 95” WITH (2) CIRCULAR BLADES TO TRIM THE EDGE AND WITH BLADE SHARPENERS WITH (14) CIRCULAR BLADES TO CUT BORDER AND WITH BLADE SHARPENERS (2) TAKE-OFF SHAFTS FOR CARDBOARD TUBES WITH FABRICS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-0022 TUNNEL OF FOAMING LINE 2300mm MAXIMUM WIDTH (90 INCHES) NEW TUNNEL LENGTH: 20 METERS SIDE CONVEYOR LENGTH: 20 METERS SIDE CONVEYORS ADJUSTABLE WIDTH: 1000mm TO 2450mm (96.4”) QUANTITY AVAILABLE: 1 Learn More

TT-7334 COMPLETE LAMINATING LINE, YEAR 2012 TO 2023 Learn More

REFERENCE NUMBER: F-1364 FABRIC AND QUILTED FABRIC WASTE CUTTING MACHINE THIS MACHINE IS USED MAINLY FOR FABRIC WASTE, QUILTED FABRIC WASTE, AND FOAM WASTE CUTTING AND RECYCLING. EQUIPPED WITH 2-SERIES CUTTERS TO CUT THE MATERIALS INTO SMALL PIECES. THE CUTTING TOOL IS SHARP AND DURABLE. SUITABLE FOR CUTTING SOFT MATERIALS. SAVE ON COSTS BY MAKING FULL USE OF FABRIC WASTE QUILTED FABRIC WASTE. DIMENSIONS: 3100 X 3550 X 1360mm POWER: 11kW CAPACITY: 400kg PER HOUR NET WEIGHT: 1200kg QUANTITY AVAILABLE: 1 Learn More